Rikomagic R5 Mini Projector Features Rockchip RK3328 Processor, Android 7.1

Rikomagic R5 Android Mini Projector

Last year, I reviewed Rikomagic RKM R1 Android mini projector with a typical TI DLP with 854×480  native resolution found in competitors, but what I really like what the touchpad and buttons at the top of the device that made it so much easier to configure and control compared to a device like Doogee P1. However with a Rockchip RK3128 quad core Cortex A7 processor and 1GB RAM, performance was on the lower side, and software already felt a little outdated (in 2017) with Android 4.4 and Kodi 14.2. The good news is that company has now launched Rikomagic R5 mini projector with significantly better hardware (Rockchip RK3328 processor + 2GB RAM), and a more recent Android 7.1 operating system. Rikomagic R5 mini projector specifications: SoC – Rockchip RK3328 quad core Cortex A53 processor with penta-core Mali-450MP GPU System memory – 2GB DDR3 Storage – 16GB eMMC flash, micro SD […]

Rikomagic RKM V3 Rockchip RK3328 TV Stick Launched for $63

We’ll know find plenty of devices powered by Rockchip RK3328 from TV boxes to development boards, but if you are interested in getting an Android TV stick based on the processor, I’m only aware of Rikomagic RKM V3 which the company unveiled in September. However, at the time the TV dongle was not for sale yet, and the company has just launched it for $62.90 including shipping on Aliexpress. RKM V3 specifications have not changed since the announcement, except we can have info about size and weight: SoC – Rockchip RK3328 quad core Cortex A53 processor @ 1.5 GHz with Mali-450MP2 GPU System Memory – 2 GB RAM Storage – 8 GB eMMC flash + micro SD card up to 32 GB Video & Audio Output – HDMI 2.0a up to 4K @ 60 Hz with HDR10 and HLG support Video Codec – 4K VP9, H.265 and H.264. 1080p VC-1, […]

Rikomagic RKM R1 Mini Projector Review – Part 2: Android Firmware, Kodi, Touchpad, and HDMI Input

Rikomagic RKM R1 is a projector running Android 4.4.4, and powered by Rockchip RK3128 quad core Cortex A7 processor with 1GB RAM, and 32GB storage. It has a particular feature as it comes with a touchpad on the top of the case as we’ve seen in the unboxing and teardown part of the Rikomagic R1 review. Today, I’ll report my experience with the projector playing games in Android, 1080p videos with Kodi 14.2, using the touchpad, and connecting a laptop through the HDMI input port. I’ll also run some benchmarks as usual. RKM R1 Android User Experience and HDMI Input I wanted to relax and use the projector on the bed pointing to the ceiling. RKM R1 comes with a tripod, but it’s quite small, not the projector would fall off, so I used my own tripod, connected a USB keyboard, and the USB RF dongle for Tronsmart Mars G01 […]

Rikomagic R1 Android Projector Review – Part 1: Unboxing and Teardown

Rikomagic R1 Android mini projector runs Android 4.4 on Rockchip RK3128 quad core processor, and the company sent me a sample for review, so today I’ll first do an unboxing, and partial teardown, before testing the projector in more details in the second part of the review. Rikomagic R1 Projector Unboxing The projector comes with a white package marked RKM R1. The bottom of the package indicated its unsurprisingly based on Texas Instruments DLP technology with a LED light, and is equipped with a touch panel and a battery. More importantly, there’s a QR code that links to R1 Setup Guide, which for once will be useful, as this device has some unique features. The projector ships with a 5V/2.5A power supply, an IR remote control, a HDMI cable, a tripod, and an adapter to make the interface between the projector box and the tripod. The top of the device […]

Rikomagic R1 mini Projector Runs Android 4.4 on Rockchip RK3128 Quad Core Processor

Rikomagic R1 may look like a Android TV box from some angles, but it’s actually a mini projector powered by Rockchip RK3128 quad core processor, with 1GB RAM, 32GB storage, with many of the port of featuring found on a TV box, plus a 854×480 DLP LED projector. Rikomagic R1 projector specifications: SoC – Rockchip RK3128 quad core Cortex A7 processor @ 1.2 GHz with Mali-400MP2 GPU System memory – 1GB DDR3 Storage – 32GB NAND flash + micro SD slot up to 32GB Projector DLP technology with 0.3″ DMD + RGB LED with 1000 lumens (TBC), likely based on Texas Instruments DLP3000. Resolution – 854×480 (WVGA) Contrast ratio – 2000:1 Projection – Area – 30 to 120″; distance: 1 to 5 meters; ratio: 1.19:1 Keystone correction – automatic, vertical: -/+ 40 degrees Manual focus Video Input – HDMI 1.4 port Audio – 3.5mm earphone jack, built-in speaker(s) Connectivity – […]

Rikomagic MK22 Review – Part 2: Android Firmware, Video & Audio in Kodi, Benchmarks…

Rikomagic MK22 is one of the many Android TV boxes powered by Amlogic S912 octa-core processor with typical hardware specifications such as 2GB RAM, 16GB flash, Gigabit Ethernet and dual band WiFi. I’ve already taken the box apart to check out the hardware in the first part of the review, so I’ll focus on the firmware, but I’ll keep it short focusing on typical problem areas, as I’ve already reviewed a bunch of other Amlogic S912 TV boxes such as Qintaix Q912 or Beelink GT1. First Boot, Firmware Update, and First Impressions After having connected all usual cables and  accessories include a 1TB USB hard drive, and RF dongles for my air mouse and wireless gamepad, I booted the device, and after around 45 seconds (typically), I got to the main launcher. Since I received the device about a month ago, I decided to go to the UPDATE&BACKUP app to […]

Amlogic USB Burning Tool Still Sucks in 2016

[Update November 2016: If you don’t like USB Burning Tool or don’t have the necessary USB cable, you can flash Amlogic IMG firmware to a micro SD card instead] In the first few years when Android TV Boxes/mini PCs started to hit the markets, in the 2012-2014 period, online firmware update was inexistent for the vast majority of the boxes, and if you wanted to update your firmware you had to use some windows tools like USB Burning Tool for Amlogic, AndroidTool for Rockchip, or PhoenixUSBPro / PhonixSuite for Allwinner platforms. All those tools have poor design, for example the window is not resizable, so it’s impossible to your an old netbook (1024×600 resolution), and then you have to install drivers which is easy, for after detection of the box may be hit and miss, and you have to follow a procedure with the right power sequence with a USB […]

Rikomagic MK22 Octa-core Android TV Box Review – Part 1: Unboxing and Teardown

Rikomagic became a much better known company when they launched MK802 TV stick in 2012, and over the years they’ve kept introducing new products, and I’ve just received a review sample of their latest Rikomagic MK22 octa-core Android TV box powered by Amlogic S912 processor. I’ve posted photos of the device and its accessories, and check out the hardware design in the first part of the review, before testing Android 6.0 firmware in the second part in a few weeks. Rikomagic MK22 Unboxing I received MK22 in its black and white retail package. The back of the package details the main features, and the hardware specifications. Instead of printing a user’s manual that anybody will hardly read, the company instead printed a QR Core to MK22 user’s manual download link. The TV box ships with a 5V/2.5A power supply, an HDMI cable, and an IR remote control that looks the […]

Exit mobile version
Memfault IoT and embedded debugging platform