Zidoo X9S Realtek RTD1295 Android & OpenWrt TV Box System Info & Benchmarks

Zidoo X9S is the first Android TV box based on Realtek RTD1295 quad core Cortex A53 processor that I’ve received for review. So in this post, I’ll show some system information with CPU-Z, and Android & OpenWrt Settings, and run typical Android benchmarks such as Antutu 6.x, Vellamo, and 3Dmark. Zidoo X9S / Realtek RTD1295 Android System Info CPU-Z detects Realtek RTD1295 is a quad core ARM Cortex A53 processor clocked between 600 MHz and 1.4 GHz with an ARM Mali-T820 GPU, and uses an unknown governor… But in adb shell, tje command “cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor” reports an ondemand governor is used. The system runs Android 6.0.1 on top of Linux 4.1.17 (I think it’s the first time I see a Linux 4.x kernel used in a TV box…), and with 1920×1080 resolution. Total RAM is shown to be 1672 MB, most probably because some RAM is reserved for the GPU […]

Tanix TX5 Pro TV Box Review – Part 2: Modding and Testing

Karl here with part 2 of Tanix TX5 Pro TV box. In the first part we peaked inside took a look at the specs and quick look at the UI. In part 2, we will get into the nitty gritty. When I first received the box there were several issues: Play Store incompatibility, issue with language reverting to Chinese, and green screen on YouTube. Tanix quickly followed up with an update and resolved these issues. Stuck in my ways So I have to admit that I am pretty stuck in my ways when it comes to the way I use Android. It started long ago with my first stick the MK808 with Rockchip Rk3066. It was basically the phone version of Android on the TV and I really liked it. We have come a long way since then and some changes have occurred in the box market UI, like the […]

M12N Amlogic S912 Octa-core TV Box Review – Part 2: Android 6.0 Firmware

Shenzhen Shiningworth MXQ Plus M12N is one of the first TV box powered by Amlogic S912 octa-core processor also bringing a faster GPU, VP9 and HDR support compared to the earlier Amlogic S905 processor. I’ve already shown the device, its accesories, and its internal degisn in the first part of MXQ Plus M12N review, so today I’ll spend time reporting my finding testing features and performance with Android 6.0 firmware. Setup Wizard and First Impressions Since there are only two USB ports, I connected my USB hard drive to one, and used a USB hub to connect input devices including two RF dongles for an air mouse, and a gamepad, as well as a USB keyboard to take screenshots. I also added Ethernet and  HDMI cable, and finally connected the power supply to boot it up. But as you can see from the picture the very first boot was not […]

M12N Amlogic S912 TV Box Benchmarks

Since Shenzhen Shiningworth MXQ Plus M12N is my first TV box powered by Amlogic S912 octa-core processor, I’ve decided to write a separate post to show system information with CPU-Z, and benchmark results with Antutu 6.x, Vellamo 3.x, and 3Dmark Ice Storm Extreme. Please note that it may not be representative of all Amlogic S912 boards, as mentioned in the teardown post, there are some concerns about the thermal design of M12N TV box. M12N / Amlogic S912 System Info I’ve merged CPU-Z’ SOC, DEVICE and SYSTEM data into a single table. The app correctly detects an 8 core Cortex A53 processor @ 100 MHz to 2.02 GHz with an ARM Mali-T820 GPU. The brand for this particurlar device is MXQ, and Model m12n. Frame buffer resolution is 1920×1080, and memory and storage data are both OK for a box with 2GB and 16GB flash. The device runs Android 6.0.1 […]

NEXBOX A95X (Amlogic S905X) TV Box Review – Part 2: Android 6.0 and Kodi 16.1

Last week I publish the first complete review of an Amlogic S905X device with MINI M8S II TV box review, and while the device work in a smooth and stable manner, some features did not work as expect such as HDMI audio pass-through. I’ve now had the change to compare  it to another S905X with NEXBOX A95X, not to confuse with its “homonym”: NEXBOX A95X with Amlogic S905 processor. I’ve already taken pictures of the device and accessories, and checked out the hardware in the first part of the review,  so today, I’ll report my finding playing with Android 6.0 firmware, Kodi video and audio capabilities, and check whether bugs and issues found on MINI M8S II are also present in the device. First Boot, Settings and First Impressions NEXBOX A95X is really a tiny device, so it’s no surprise that it only comes with two USB 2.0 ports, and […]

Mini M8S II TV Box (Amlogic S905X) Review – Part 2: Android 6.0 Firmware

Mini M8S II is one of the first Amlogic S905X TV box to hit the market, with the new processor adding 4K VP9 hardware video decoding and HDR support compared to Amlogic S905 processor. I’ve already taken pictures of the device and torn it apart to check its hardware & thermal design in the first part of the review, and in the second part, I’ll boot it up, check performance, features, and video playback capabilities. First Boot, Settings and First Impressions I plugged-in a USB hard drive into one USB port, but since the device only fetures two ports, I had to use a USB hub to connect two RF dongles for MINIX NEO A2 Lite air mouse, and Tronsmart Mars G01 gamepad, as well as a USB keyboard to take screenshots. I completed the hardware setup by connecting HDMI & Ethernet cables before starting the device by connected the […]

Pine A64 Board Quick Start Guide & Benchmarks with Android 5.1

Pine A64 is one of the development boards with the best cost/performance ratio, as it sells as low as $15 + shipping. I received Pine A64+ board with 2GB RAM at the end of last month, and decided to start playing with Android, as Linux distributions such as Longsleep Ubuntu appear to require a little more work. So in this post, I’ll report my experience with installing and running Android 5.1 on the board, and share some Android benchmark results. Pine A64 Board Pictures You’ll receive the board in cardboard package with Pine64 branding. You can check which version of the board you’ve been sent on the side of the package: PA64512 (512 MB RAM), PA641GB (1GB RAM), or PA642GB (2GB RAM). The top of the board has been photographed often but here it is again. I’ve been sent the 2GB version without wireless module. The bottom of the board […]

Matricom G-Box Q2 Android TV Box Review

Another guest review from Karl, this time, with Matricom G-Box Q2 Android 5.1 TV box based on Amlogic S812 processor. First Impressions Today I will be reviewing the G-Box Q2 by Matricom. This is a follow up device to the popular G-Box Q. The first day I plugged it in and did some basic first impressions I thought it was laggy…..but after using it and setting up the way I am accustomed to using it…I found it very fast and responsive. From the time power is applied to launcher is loaded is about 33 seconds. The software seems solid and I ran into only minor issues. It got very respectable scores between 38000 and 42000 on Antutu. The box does have a lot of software that I am not a fan of, but these can be easily uninstalled. The launcher that comes with it is ok but I prefer a […]

ASUS Tinker board - Raspberry Pi alternative