vxworks News - Page 3 of 3 - CNX Software

November 15, 2019July 22, 2022 by Jean-Luc Aufranc (CNXSoft) - No Comments

Acromag COM Express Type 10 Mini-ITX Carrier Card Supports Four Acropack mini PCIe Modules

COM Express Mini ITX Atom-x5 Apollo Lake & mPCIe Modules

Acromag, a company based in Michigan and specialized in the industrial I/O market, has recently launched ACEX4041 COM Express Type 10 Mini-ITX carrier card which supports up to four of the company’s AcroPack mini-PCIe I/O modules. ACEX4041 COM Express Type 10 Mini-ITX Carrier Card The Mini-ITX form factor of the board enables it to interfaces four plug-in AcroPack I/O modules to an Intel Atom E3950 (Apollo Lake) CPU module with provisions for both M.2 and SATA SSD data storage and a variety of peripherals on-board. ACEX4041 specifications: SoM Compatibility Electrical and mechanical interface for industry-standard COM Express Type 10 Mini (55mm x 84mm) CPU modules with four PCIe lanes configured as an x4 port for optimal performance. Current CPU Option – Intel Atom E3950 quad-core, 1×4 PCIe configuration, 1.6/2.0GHz (Turbo) , 4GB RAM, 12W. PCIe Switch – 9-port 12-lane PCIe Gen 2 switch expands the single host PCIe x4 port […]

January 17, 2019January 17, 2019 by Jean-Luc Aufranc (CNXSoft) - 13 Comments

Minnow Server is a Secure Web Server for Microcontrollers

Many embedded systems have a limited amount of memory, which would normally run programs with smaller footprints than on desktops or servers. For example, nginx and Apache2 are the common web servers, but on hardware with limited memory, smaller footprint web servers may be required, so that’s why I wrote a list of web servers for embedded systems running Linux/uClinux many years ago. But now, even platforms based on microcontrollers often need to run web server usually for configuration. We’ve already shown how to use Arduino to serve a simple web page and did the same in Getting Started with NodeMCU Board Powered by ESP8266 WiSoC but using Lua programming language instead. It may be more convenient to run a proper web server however, as it’s easier to change the interface, and we previously covered MicroWebSrv lightweight web server that works on platforms running MicroPython such as Pycom boards. Real Time […]

October 24, 2017 by Jean-Luc Aufranc (CNXSoft) - 4 Comments

AMBE+2 Vocoder Promises High Voice Quality at Low (2.0 to 9.6 Kbps) Data Rates

Opus 1.2 open source audio codec was release a few months ago with the ability to deliver low power low high-quality audio bitrate for speech with bitrates as low as 12 Kbps. Digital Voice Systems (DVSI) claims to have gone even lower thanks to their AMBE+2 vocoder (Advanced MultiBand Excitation) providing high-quality speech at data rates from 2.0 to 9.6 kilobytes per second. AMBE+2 vocoder is said to outperform the company’s previous generation AMBE+ Vocoder as well as the G.729 and G.726 vocoders, while operating at only 4.0 Kbps. The vocoder is suitable for mobile radio, secure voice, satellite communication, computer telephony, digital voice and storage applications The solution can be integrated into product either using software licensing, or through Vocoder chips, and the company lists the following key benefits: Maintains speech intelligibility and speaker recognition at rates as low as 2.0 kbps Resistant to background noise and channel bit errors […]

June 16, 2017 by Jean-Luc Aufranc (CNXSoft) - No Comments

Axiomtek tBOX100-838-FL Fanless Transportation Computer Features BNC Video & Audio Inputs for DVR Function

Axiomtel tBOX100-838-FL is a fanless Bay Trail rugged embedded computer powered by an Intel Bay Trail-I E3845 processor with 5 BNC input ports for video and audio, and targeting vehicle, railway and marine markets. Axiomtek tBOX100-838-FL rugged mini PC’s specifications: SoC – Intel Atom E3845 quad core Bay Trail-I processor @ up to 1.91 GHz with Intel HD graphics System Memory – 4 GB DDR3L-1333 Storage – 1x 2.5” SATA slot up to 9.5mm, 1x mSATA connector, flash for AMI BIOS Video Output – 1x VGA port Video / Audio Input – 4x video in BNC connector, 1x audio in BNC connector Connectivity – 2x M12 A-coded GbE LAN or 2x RJ-45 GbE LAN (via Intel i210) Serial – 1x RS-232/422/485 (DB9) USB – 2x USB 2.0 port Expansion – 1x Full-size PCIe Mini Card with mSATA; 1x SIM card slot Misc – 1x remote switch; 1x reset button; watchdog […]

October 26, 2016June 18, 2018 by Jean-Luc Aufranc (CNXSoft) - 12 Comments

Congatec Unveils conga-SA5 SMARC 2.0 Modules based on Intel “Apollo Lake” Atom x5/x7, Celeron and Pentium Processors

congatec, a company specialized in embedded computer modules, single board computers and embedded design and manufacturing services, has just introduced their conga-SA5 system-on-module family compliant with SMARC 2.0 specifications, and powered by the latest Intel Apollo Lake processors. conga-SA5 SoM’s specifications: SoC (one of the list) Intel Atom x7-E3950 quad core processor @ 1.6 / 2.0 GHz with 2MB L2 cache, 18 EU Intel Gen 9 HD Graphics (12W TDP) Intel Atom x5-E3940 quad core processor @ 1.6 / 1.8 GHz with 2MB L2 cache, 12 EU Intel Gen 9 HD Graphics (9W TDP) Intel Atom x5-E3930 dual core processor @ 1.3 / 1.8 GHz with 2MB L2 cache 1MB, 12 EU Intel Gen 9 HD Graphics (6.5W TDP) Intel Celeron N3350 dual core processor @ 1.1 / 2.4 GHz with 1MB L2 cache, 12 EU Intel Gen 9 HD Graphics (6W TDP) Intel Pentium N4200 quad core processor @ […]

April 9, 2015April 9, 2015 by Jean-Luc Aufranc (CNXSoft) - 5 Comments

Vortex86DX3 is a New x86 SoC for Embedded Systems

Intel is already making embedded version of their processor with example with Bay Trail-I or Quark SoCs, but Taiwan based DMP Electronics has also been making x86 SoC such as Vortex86EX that can be found in $39 86duino Zero board, which must be one the cheapest, if not the cheapest, x86 board on the market. Of course, this is not designed to run Windows and Office, but rather some embedded (IoT) applications. The company has recently launched Vortex86DX3, a more powerful x86 dual core processor, suited to embedded systems and communication products such as thin clients, NAT routers, gateways, etc… DMP Vortex86DX3 specifications: Dual Core x86 Processor @ 1GHz with 6 stage pipeline, x86 instruction set Floating point – Implements ANSI/IEEE standard 754-1985 for binary Floating-Point Architecture Cache – 8-way 32K I-Cache, 8-way 32K D-Cache, 4-way 512KB L2 Cache with write through or write back policy System DDR3 Control Interface – 32-bit data […]

July 4, 2013July 23, 2022 by Jean-Luc Aufranc (CNXSoft) - No Comments

Alpha Data ADM-XRC-7Z1 XMC Mezzanine Card Powered by Xilinx Zynq SoC

Alpha Data, a company providing solutions for compute intensive applications, has announced the ADM-XRC-7Z1, an XMC board powered by Xilinx Zynq-7045 or Zynq-7100 Cortex A9 + FPGA SoC targeting application such as software-defined radio, radar and sonar processing, image processing and machine vision. If you are like me, and have never heard about XMC mezzanine cards before, here’s what Wikipedia has to say about it: XMC, or Switched Mezzanine Card, is a PCI Mezzazine Card (PMC) with high-speed serial fabric interconnect defined by the VITA 42 standard. XMC specifies a 5th connector (“P15”) that supports PCI Express (VITA 42.3) or other high speed serial formats such as Serial RapidIO (VITA 42.2) and Parallel RapidIO (VITA 42.1). VITA (VMEbus International Trade Association) is an organization developing and promoting open technology standards that you can download for a fee. Here are the specifications of the board: SoC – Xilinx Zynq-7045 or Zynq-7100 dual […]

September 20, 2011February 22, 2015 by Jean-Luc Aufranc (CNXSoft) - No Comments

Texas Instruments AM387X Sitara ARM Cortex A8 Microprocessors

Texas Instruments (TI) has introduced three new AM387x ARM Cortex-A8 microprocessors (MPUs): AM3871, AM3872 and AM3874. TI says these MPUs offer integration of the ARM Cortex-A8 core, peripherals for high-bandwidth connectivity (SATA, D-CAN, PCI Express (PCIe), Gigabit Ethernet switch and more), 3D graphics for enhanced GUIs and display subsystems for camera connectivity and viewing. The AM387x ARM Cortex-A8 MPU can connect to and control IP and CAN networks, HD displays, keyboard, mouse, PC, SD card and various general purpose peripherals, all via one highly integrated processor in an industrial automation application controlling a production line and a high-speed, shared data bus allows for reduced communication overhead and quick access to shared data, which results in reduced chip count, discrete memory costs and printed circuit board (PCB) space compared to separate solutions. Those MPUs are targeted at a variety of fanless applications such as: single board computing, network and communications processing, […]