wifi 8 News - CNX Software - Embedded Systems News

wifi 8

Posted on by Jean-Luc Aufranc (CNXSoft) - 3 Comments on Broadcom updates its Wi-Fi 8 access point chips portfolio with BCM4918 APU, BCM6714 and BCM6719 dual-band radios

Broadcom updates its Wi-Fi 8 access point chips portfolio with BCM4918 APU, BCM6714 and BCM6719 dual-band radios

Broadcom Wi-Fi 8 chips BCM4918 BCM6719 BCM6714

Broadcom has just announced the launch of its next-generation chips for Wi-Fi 8 access points at CES 2026 with the BCM4918 Accelerated Processing Unit (APU), and two new dual-band Wi-Fi 8 radios: BCM6714 and BCM6719. The last two build upon the Broadcom BCM6718 WiFi 8 tri-band SoC with different antenna configurations, namely 4×4 2.4GHz and 4×4 5 GHz for the BCM6719, and 3×3 2.4GHz and 4×4 5 GHz for the BCM6714, and integrated 2.4 GHz PAs. The AP4918 builds upon the AP4916, but I was unable to obtain information about the improvements from a company representing Broadcom. Broadcom BCM4918 Wi-Fi 8 APU BCM4918 key features: High-performance Quad-core Armv8 CPU complex for general-purpose software workloads Integrated Broadcom Neural Engine (BNE) for on-device AI/ML inference and acceleration Advanced networking engines to offload both wired and wireless data paths, enabling complete CPU bypass of all networking traffic Integrated cryptographic protocol acceleration end-to-end data […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 12 Comments on Broadcom unveils WiFi 8 chips for access points and clients

Broadcom unveils WiFi 8 chips for access points and clients

Broadcom WiFi 8 router chips

Broadcom has recently revealed its first WiFi 8 (802.11bn) chips with the BCM43109 for wireless clients such as smartphones, laptops, tablets, and automotive devices, the BCM6718 designed for residential and operator access applications, and the BCM43840 and BCM43820 made for enterprise access applications. Broadcom BCM43109 WiFi 8, Bluetooth 6.0, and 802.15.4 client chip Specifications: IEEE 802.11bn compliant Dual-stream spatial multiplexing data rate of up to 5 Gbps during single-band operation and 5.25 Gbps in RSDB mode Up to 320 MHz channels for the 2×2 5 GHz and 6 GHz radio, and 20 MHz channels for the 2×2 2.4 GHz radio STR MLO and EMLSR support Scan radio enhances 2.4 GHz, 5 GHz, and 6 GHz channel performance Dual-core Bluetooth 6.0 with 2G, higher band SDB with HDT, and support for future Bluetooth versions IEEE 802.15.4 supporting OpenThread, ZBOSS, etc. Host interface PCIe Gen3 x1 for WiFi UART for Bluetooth PCM and I2S […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 3 Comments on Wi-Fi 8 (802.11bn) to focus on reliability and efficiency while maintaining Wi-Fi 7 performance

Wi-Fi 8 (802.11bn) to focus on reliability and efficiency while maintaining Wi-Fi 7 performance

WiFi 4 vs WiFi 5 vs WiFi 6 vs WiFi 7 vs WiFi 8

Wi-Fi 7 (802.11be) routers and modules have only been launched recently, but engineers are already working on Wi-Fi 8 (802.11bn) “Ultra High Reliability (UHR)”, and MediaTek shared some details in a whitepaper detailing some of the improvements of the new standard for its upcoming Filogic Wi-Fi 8 SoCs. Surprisingly, there aren’t any enhancements to the maximum performance with Wi-Fi 8 still offering up to 320 MHz channel bandwidth, 23 Gbps maximum PHY rate, and support for 2.4 GHz, 5GHz, and 6GHz frequency bands, as well as up to 8 spatial streams. The Wi-Fi 8 improvements are all meant to improve Wi-Fi reliability, network efficiency, and power consumption in IoT use cases, which will end up improving the overall WLAN performance when many nodes are connected. Wi-Fi 8 new features: Coordinated Target Wait Time (TWT) allows low-power IoT devices to negotiate specific times for transmission with access points in order to […]