Intel Celeron N3060 based Industrial Fanless Touch Panel Computer Supports SATA Drives

Axiomtek GOT5103W-845 is a new IP65 industrial touch panel PC with a 10.1″ display, an Intel Celeron N3060 dual core processor, up to 8GB RAM, dual Gigabit Ethernet, USB 3.0, and support for half-slim SATA and mSATA SSD drives. Specifications: SoC – Intel Celeron N3060 dual core processor @ 1.6GHz / 2.48 GHz (Turbo) with Intel HD graphics 400 with 12EU @ 320/600 MHz System Memory – 1 x 204-pin SO-DIMM DDR3L-1600 up to 8 GB Storage – 1x mSATA, 1x optional half-slim SATA SSD Display – 10.1″ WXGA TFT LCD with LED and projected capacitive touch screen; 350 nits; 1280 x 800 resolution Video Output – 1x HDMI port Audio – 1x Line Out, HDMI, 2x speakers Connectivity – 2x 10/100/1000Mbps (Intel i211AT), optional WLAN antenna USB – 2x USB 2.0, 2 x USB 3.0 COM ports – 1 x RS-232; 1 x RS-232/422/485 Expansion for storage, Wifi, GPRS/GSM, […]

DAB Embedded OpenWrt Router Board Combines Atmel SAMA5D3 SoC and Altera MAX 10 FPGA

DAB Embedded, a Belgian engineering company specialized in research and development of electronic products, has designed DAB-OWT-SAM5 router board powered by Atmel SAMA5D36 Cortex-A5 processor and Altera MAX 10 FPGA, which runs OpenWrt or Windows Embedded Compact 7, and targets IoT applications. DAB-OWT-SAM5 board specifications: SoC – Atmel SAMA5D36 ARM Cortex-A5 processor @ 536MHz with Floating-Point Unit. FPGA – Altera MAX 10 FPGA with integrated ADC (Exact part number not disclosed) System Memory – Up to 512MB DDR2 Storage – Up to 2GB NAND flash, 1Mbit SPI flash, micro SD slot Connectivity – 2x Fast Ethernet ports, 802.11 b/g/n WiFi (Direct, station mode, and soft-AP) via Atmel ATWILC1000B module Display Interface – LVDS connected to FPGA USB – 1x USB 2.0 host, 1x USB 2.0 device Expansion Connectors Wired interfaces – RS232, CAN 2.0 A/B, KNX, RS-485/422, etc… Wireless connectivity – Zigbee, Z-Wave, KNX RF, etc… Power Supply – 5V DC […]

Isurki IRIS Industrial Embedded Computer Takes Nvidia or NXP System-on-Modules

Isurki is a Spanish company providing electronics & IT services to hydraulic resources management companies, and one of their products is IRIS industrial embedded computer based on Toradex Iris carrier board that supports Toradex Colibri ARM system-on-modules based on either Nvidia Tegra 2/3 or NXP Vybrid VF50/VF61 processors. Main board connectors and features: Video – DVI-I LCD Interface – RGB / LVDS with 4/5 resistive touch interface Audio – Line-In, line-Out, Mic-In Storage – Micro SD Connectivity – 10/100M Ethernet USB – 1x USB host, 1x USB OTG Expansion – 24 GPIOs, 3x UART ports Misc – 1x IrDA, RTC Power Supply – 6 to 27V DC, reverse polarity and short circuit protected Then you can choose among several variations of ARM based Colibri system-on-modules: Colibri T20 Nvidia Tegra 2 dual core Cortex A9 processor with 256 to 512MB DDR3, and 512MB to 1GB flash Dual independent displays 2D/3D hardware […]

Texas Instruments Introduces Entry level Sitara AM3351 Cortex-A8 Processor

Texas Instruments Sitara AM335x processor are designed by industrial applications, and found in develompent board such as BeagleBone Black or BeagleBone Green, and the company has recently launched the new Sitara AM3351 Cortex A8 processor without 3D GPU, no PRU just like AM3352, but they’ve also canned the two CAN interfaces (sorry, I had to) in order to bring the cost lower, while keeping the processor software and pin-to-pin compatible with other AM335x processors available in 13×13 mm package. TI Sitara AM3351 CPU clock will also be limited to 300 MHz to 600 MHz with respectively AM3351BZCE30 and AM3351BZCE60 parts. It will only come with one Gigabit Ethernet port instead of up to two ports of other members of the family that are produced in 15x15mm package, and temperature range is limited to 0 to 90 C. Other features remain the same, and the processors will support TI-RTOS, Linux, Android, […]

ADLINK CM1-86DX3 Dual Core Vortex86DX3 SBC Complies with PC/104 Standard

Adlink has recently introduced a rugged industrial single board computer based on PC/104 standard with anISA bus, and powered by DM&P Vortex86DX3 dual core processor combined with 2GB RAM, SATA and CFast for storage, and Fast & Gigabit Ethernet for networking. Adllink CM1-86DX3 board specifications: SoC – DM&P Vortex86DX3 dual core x86 processor @ 1GHz with 2D GPU, FPU, 32K I-Cache, 32K D-Cache, and 512KB L2 Cache Memory – 2GB DDR3L Storage – SATA, CFast socket. Video Output – VGA; 18/24-bit single-channel TLL/LVDS Connectivity – 1x integrated Fast Ethernet, 1x Gigabit Ethernet (via Intel i210T) USB – 2x USB 2.0 Serial – 2x RS232/422/485,2x RS232, Other I/Os -8x GPIO, 8x A/D Misc – RTC; watchdog; PS/2 port; Smart Embedded Management Agent (SEMA) functions such as a timer, temperature. monitor, fail-safe BIOS, etc… Power Supply – 5V DC (AT mode); Consumption: ~6-7 W Dimensions – 96 x 90mm (PC/104 specifications 2.6 […]

PCOMnetA5 is a Small Dual Ethernet Board Powered by Freescale Vybrid Processor

F&S Elektronik Systeme has introduced a credit card sized industrial board powered by Freescale Vybrid single core Cortex A5 SoC featuring two Ethernet ports, support for RGB panels with resistive touch, and various I/Os headers for USB, UART, CAN and so on. The board is comprised of a baseboard and the company’s PicoMODA5 module with the following combined specifications: SoC – Freescale Vybrid Cortex-A5 processor @ 500 MHz with 512KB cache, NEON instructions and GPU System Memory – 256 MB RAM Storage – 128 MB Flash + µSD slot Display – 18-bit RGB LCD with 4-wire analog resistive PCAP-Touch via I2C Connectivity –  2x 10/100M Ethernet with IEEE1588, optional WiFi USB – 2x USB 2.0 host ports via header, 1x micro USB 2.0 device port Other I/Os 2x CAN RS232/RS485 1x I2C, 1x SPI 7x Digital I/O Supply Voltage –  +5V DC/ ±5% Dimensions – 80x50mm Operating Temperature Range – […]

Data Modul eDM-pITX-BT pico-ITX Boards Powered by Intel Bay Trail Processors

Data Modul has introduced industrial pico-ITX boards based on low power Intel Atom or Celeron Bay Trail processors, that include a Gigabit Ethernet port, LVDS, HDMI or DisplayPort video output, a SATA interface and up to 4 GB RAM. eDN-pITX-BT boards specifications: SoC: Intel Atom E3815 single core processor @ 1.46GHz with HD graphics – 5W TDP Intel Celeron J1900 quad core processor @ 2.0 GHz (up to 2.42GHz) with HD graphics – 10W TDP System Memory – 2GB or 4GB on-board DDR3L (1600 MT/s) Storage – SATA 2.0 (3GB/s), mSATA via mini-PCIe Video Output / Display I/F – DisplayPort up to 2560 x 1600, optional HDMI (TBC),  dual-channel 24-bit LVDS up to 1920 x 1200, backlight control. Dual independent display support. Audio – Realtek ALC888S HDA audio codec – S/PDIF, front speaker, and microphone via headers. Connectivity – 1x Gigabit Ethernet USB – 3x USB 2.0; 1x USB 3.0 […]

Axiomtek Introduces a Fanless 17″ Touch Panel Computer Powered by Intel Celeron J1900 Processor

Axiomtek, a Taiwan based manufacturer of industrial computers & embedded systems, has (not-so-recently) launched GOT3177T-834-FR fanless  panel computer with a 17″ multi-touch screen, and powered by an Intel Celeron J1900 “Bay Trail-D” quad core processor with up to 8GB RAM, and SATA or CFast interfaces. Target applications include transportation, train, control platform of ships, heavy industry, and oil pipe monitoring systems. GOT3177T-834-FR panel compute specifications: SoC – Intel Celeron Processor J1900 quad core processor (2M Cache, up to 2.42 GHz) with Intel HD graphics System Memory – 1x 204-pin DDR3L SO-DIMM socket (Maximum memory up to 8GB) Storage – 1x 2.5” SATA, 1x CFast slot or mSATA Display – 17” SXGA(1280×1024) LCD with LED backlight; Flat resistive touch Audio – 1x Line-out Connectivity – 2x RJ45 for Giga Ethernet (Intel i210IT), optional WLAN/3G module & antenna USB – 2x USB 3.0 port, 2x USB 2.0 host ports Serial – 2x […]

EDATEC Raspberry Pi 5 fanless case