ISEE IGEP COM AQUILA Powered by TI Sitara AM3354 Processor is now available for 79 Euros

Back in February, ISEE announced 2 new computers-on-module based on TI AM335x at Embedded World 2013. IGEP COM AQUILA, one of those 2 modules based on AM3354, is now available and we have a more information about software support, and baseboard availability. AQUILA specifications do not appear to have changed since the earlier announcement: Processor – Texas instruments Sitara AM3354 Cortex A8 @ 720 Mhz + PowerVR SGX GPU System memory – 256 MB DDR3 SDRAM, 303 MHz, 16-bit Storage – 128 MB SLC NAND FLASH + on-board micro-SD socket Networking – 1x Ethernet PHY Debug Interface – JTAG Sitara AM335x interfaces – USB Host/OTG, I2C, SPI, CAN, UART, LCD controller, GPIOs, etc… Power – 4V to 5,5V DC via SODIMM connector. 1x Linear 3V3@1A regulator Dimensions – 67,6mm x 26 mm (SODIMM form factor) Temperature Range – Industrial: -40 to +85 C What’s new to me, is the tiny […]

GOsingGO GSG-TB06 Android TV Stick Features an Ethernet Port

There’s a plethora of Android HDMI TV dongles, but all of them only provide Wi-Fi connectivity, and if you need better network performance you need to add Ethernet via an USB to Ethernet dongle. There’s now another solution, that may not be very new, with GOsingGO GSG-TB06 a mini PC based on AllWinner A10 that includes an Ethernet Port. Here are the specifications of the device: SoC – Allwinners A10 @  1.0GHz System Memory – 1GB RAM Storage -4 to 32 GB flash + micro SD card slot Video output – HDMI & AV USB – 1x USB 2.0, 1x micro USB for power Connectivity – Ethernet (RJ45) + Wi-Fi 802.11 b/g/n (AR6103) Dimensions – 105L x 37W x 15.6Hmm The device comes with a USB power adapter, an RCA (AV) cable, and a user’s manual. The manufacturer says it’s running Android 4.1. The specs are not that great, but […]

Khadas Edge2 Arm mini PC

Tessel ARM Cortex-M3 MCU Board Brings Hardware Hacking to Web Developers with JavaScript and Node.js

People who are proficient with JavaScript or web technologies may not be completely comfortable with programming MCU in assembler and/or C programming language. Node.js, written in JavaScript, seems to be quite popular this days for diverse projects, but technical.io has decided to design a board called Tessel, powered by a Cortex M3 MCU. that can be fully programmed with JavaScript/Node.js. Tessel hardware specifications: MCU – NXP LPC1830 ARM Cortex-M3 @ 180mhz System Memory – 32MB SDRAM Storage – 32MB Flash Connectivity – Wi-Fi via TI CC3000 Expansion – 16-pin GPIO bank for prototyping Power – Micro USB or battery The board is said to be compatible with 1000’s of Node.js modules from NPM, can be programmed via USB or Wi-Fi using your own IDE, and support Tessel modules, as well as Arduino Shields. There are two (price) classes for Tessel modules: Class A: Relay — turn devices on and off (up […]

Free Shenzhen Map to Shop for Electronics in Huaqiangbei

Huaqiangbei is the place in Shenzhen, China, to shop for electronics components and devices. There are several multi-story buildings with lots of different electronics fares, and if you look for some specific components it’s more than likely to be found there.  However it may take some time to find what you need there, but it may just have become a little easier, as Seeed Studio has published a map that you can buy for $5, or simply download for free (PDF). The map has 2 main sections: Some general information about Shenzhen such as transportation (border crossing, station), leisure, main locations of factories, and a bit more. Huaqiangbei map with short descriptions of what you can buy in the different buildings, as well as places to eat, and stay. Seeed Studio will also setup a wiki, so that makers can add interesting places they went shopping in Shenzhen.

Radxa Rock Development Boards with Rockchip RK3188 Are Available for Developers Now

As previously mentioned, work was in progress to design development boards based on Rockchip processors. Radxa Rock and Radxa Rock Lite, 2 boards powered by Rockchip RK3188, are now available to early developers, and the final versions will soon be broadly available. Here are the boards specifications: SoC – Rockchip RK3188 ARM Cortex-A9 quad core @ 1.6Ghz + Mali-400 MP4 GPU System Memory – 2GB DDR3 @ 800Mhz (1GB DDR3 @ 800Mhz for Lite version) Storage – 8GB Nand Flash (4GB Nand Flash for Lite version) + micro-SD SDXC up to 128GB Video Output – HDMI 1.4 up to 1080p@60hz, andAV output Connectivity: 10/100M Ethernet port WIFI 150Mbps 802.11b/g/n with antenna Bluetooth – Bluetooth 4.0 (Not in Lite version) Audio I/O – Audio S/PDIF, headphone jack USB – 2x USB 2.0  host port, micro USB OTG Debugging – Serial Console Misc – IR sensor, power key, recovery key, reset key, […]

SolidRun Announces Cubox-i Platform with Freescale i.MX6 for as low as $45

SolidRun has been providing tiny development platform such as Cubox and Cubox Pro featuring Marvell ARM compatible processors. However, the price of those platforms are well over $100, so the company decided to provide lower cost development platforms (Cubox-i) based on Freescale i.MX6 Solo/Dual Lite/Dual/Quad that sells for $45 and up. There are four versions: Cubox-i1 – Freescale i.MX6 Solo, 512 MB RAM, 10/100M Ethernet, optional Wi-Fi/Bluetooth module. Price: $44.99 Cubox-i2 – Freescale i.MX6 Duallite, 1GB RAM, 10/100M Ethernet, optional Wi-Fi Bluetooth module. Price: $69.99 Cubox-i2Ultra – Freescale i.MX6 Dual, 1GB RAM,  Gb Ethernet (470 Mbit real), Wi-Fi and Bluetooth, SATA II. Price: $94.99 Cubox-i4Pro – Freescale i.MX6 Quad, 2GB RAM, Gb Ethernet (470 Mbit real), Wi-Fi and Bluetooth, SATA II. Price: $119.99 The devices measure 55mm x 55mm x 42mm. The full specifications are better seen in the comparison table found in SolidRun website. The 4 models all boot […]

UP 7000 SBC

NSZ-GU1, Sony’s Next Google TV Box will be an HDMI TV Stick

Since 2010, Sony has been working on Google TV device, and last year they announced Sony NSZ-GS7, a Google TV 2.0 set-top box. This year, nothing have been announced yet, but a few pictures of a new device have shown up in the FCC site. Sony NSZ-GU1 will be some sort of HDMI TV stick that you insert into your TV, except it looks more like a small set-top box has been glued onto an HDMI TV dongle. Here are the specifications derived from the FCC fillings and pictures: SoC- Marvel 88DE3108-A1 dual core processor (Marvell Armada 1500). System Memory – 1GB RAM Storage – 4GB NAND Flash (Toshiba THGBM5G5, If I’ve read correctly) Video I/O – HDMI output (MHL) 720p/60, micro HDMI input  720p/60 Connectivity – 802.11b/g/n WiFi (AzureWave AW-NH390), Bluetooth 3.0 USB – 1x micro USB port (for power only?) Misc – IR Blaster Power – 5V via […]

Embedded Linux Conference Europe 2013 Schedule – Build Systems, Security, Device Tree, Debugging & Profiling Techniques, and More

Embedded Linux Conference Europe 2013 will conveniently start right after LinuxCon 2013, last 2 days (October 23-24), and take place at the same location: the Edinburgh International Conference Center, Edinburgh, United Kingdom. The Linux Foundation has published the schedule for the conference, so I’ll make my own virtual schedule with sessions that I find particularly interesting. Thursday – 24th of October 9:30 – 10:10 – Timeline For Embedded Linux by Chris Simmonds, Consultant, 2net Limited Today, Linux is woven into the fabric of our technology. Things such as printers, routers, TVs and phones all have their own “Inner Penguin”. Yet it was never originally intended to be used beyond desktop and server PCs. A lot of things had to happen before Linux could break out of the PC environment and make its way in the world as a jobbing jack-of-all-trades. Since the early beginnings of embedded Linux in the late 1990’s many people have contributed […]

Khadas VIM4 SBC