XIAO Debug Mate
Posted on

$19.90 XIAO Debug Mate ESP32-S3-based 3-in-1 multi-tool acts as a DAPLink debugger, serial monitor, and/or power profiler

Seeed Studio XIAO Debug Mate is an inexpensive ESP32-S3-based multi-tool designed for the company’s XIAO boards, offering DAPLink debugger, serial monitor, and power profiler modes. The debugger comes with 8MB flash, 8MB PSRAM, a 2.01-inch display to display debugging/power information, two 14-pin headers to provide easy access to the XIAO’s module I/Os, a 36 LED matrix for status indication, and a couple of buttons, plus a srcoll wheel to navigate the menu. The serial monitor function can also be used be Arduino, Raspberry Pi, or other boards. XIAO Debug Mate specifications: Wireless MCU – Espressif Systems ESP32-S3R8 CPU – Dual-core Tensilica LX7 microcontroller @ 240 MHz Memory – 512KB SRAM, 8MB PSRAM Wireless – Wi-Fi 4 & Bluetooth 5.0 dual-mode (Classic + BLE) connectivity Storage – 8MB SPI flash Display – 2.01-inch TFT LCD with 296 x 240 resolution Expansion 2x 14-pin female GPIO headers routing the XIAO module pins […]

Heltec WiFi LoRa 32 V4 shell kit
Posted on

Heltec WiFi LoRa 32 (V4) – An ESP32-S3 off-grid LoRa/Meshtastic communicator with solar input, GNSS, and 28dBm Tx Power

While searching AliExpress, I found the WiFi LoRa 32 (V4) shell set, another ESP32-S3-based off-grid LoRa/Meshtastic communicator designed for long-range wireless applications. Compared to devices like Blackout Comms, Wio Tracker L1 Pro, and ThinkNode M2, this device features built-in solar charging, optional GNSS, a removable battery, and a higher transmit power. The device features a Semtech SX1262 LoRa transceiver, an amplifier delivering up to 28 ± 1 dBm transmit power, along with integrated Wi-Fi and Bluetooth 5/Mesh connectivity. It adds solar charging, an 8-pin GNSS connector, upgraded battery management, gold-plated 40-pin headers, and a fully protected 0.96-inch OLED, as well as a few I/Os for expansion. The USB-C port includes ESD and short-circuit protection, while dual IPEX connectors support both LoRa and 2.4 GHz antennas. Heltec WiFi LoRa 32 (V4) specifications: SoC – Espressif Systems ESP32-S3 CPU – Dual-core 32-bit microcontroller @ 240MHz Memory – 512KB SRAM, 2MB PSRAM Storage – […]

Sponsored
Sponsored
Sponsored
HackStar
Posted on

HackStar – An RP2040 or ESP32-S3-based USB hacking cable/dongle (Crowdfunding)

HackStar is an ethical hacking tool based on Raspberry Pi RP2040 or ESP32-S3 in a USB cable or dongle form factor for education, pentesters, and makers. While the email I received claimed the HackStar was the “first-ever production-ready ethical hacking product on Kickstarter”, we’ve written about a range of hacking devices based on ESP8266, ESP32, and/or RP2040 microcontroller(s) such as the popular Flipper Zero, the BUG USB stick, nRFBOX V2 ESP32 wireless hacking tool, ESP32 Marauder Double Barrel, HackyPi USB adapter, and many others. What’s relatively new, or at least less common (see HackCable project), here is that the HackStar is also available as a USB Type-A to USB Type-C WiFi hacking cable… HackStar Cable hardware specifications: Wireless SoC – Espressif Systems ESP32-S3 dual-core LX7 processor @ 240 MHz with 2.4 GHz WiFi 4 and Bluetooth LE/dual mode USB Type-A male connector USB Type-C male connector Length – TBD HackStar […]

Windows 95 on ESP32-S3 LCD board
Posted on

Windows 95 made to run on ESP32-S3 hardware with Tiny386 x86 PC emulator

He Chunhui (hchunhui) has developed the Tiny386 x86 PC emulator in C (C99) and managed to run Windows 3.1/3.2 and Windows 95 on an ESP32-S3 devkit with a 3.5-inch display. We had already seen Linux 5.0 boot on an ESP32 board, and Olimex ESP32-S3-DevKit-LiPo run a more recent Linux 6.3 image, but I think it might be the first time somebody has loaded Windows on ESP32 hardware. Bear in mind that since the Tiny386 is an emulator running SeaBIOS, it can also boot the Linux kernel directly. He Chunhui explains that the i386 CPU emulator is built from scratch and still lacks some features, such as debugging, hardware tasking, and certain permission checks. It also includes some 486 and 586 instructions to be able to boot a modern Linux kernel and Windows. The code is rather small as the CPU emulator is only about 6,000 lines of code (LOC) long, […]

Kode Dot motor control
Posted on

Kode Dot – An easy-to-use, pocket-sized, battery-powered ESP32-S3 devkit (Crowdfunding)

Kode Dot is a pocket-sized ESP32-S3 maker device for prototyping with a built-in 2.13-inch AMOLED, a 500mAh battery, a 9-axis IMU, a microphone and a speaker, an RTC, a few buttons,  a GPIO header, and a magnetic connector for expansion. Kode Dot is designed to simplify the prototyping process. Users can still write code using the Arduino IDE, PlatformIO, or ESP-IDF framework and upload it via the kit’s USB-C port, but thanks to kodeOS firmware, each program becomes a standalone app with its own name, icon, and interface, accessible from the graphical user interface. Kode Dot specifications: SoC – Espressif Systems ESP32-S3 dual-core microcontroller with 2.4 GHz Wi-Fi, Bluetooth 5 LE, ESP-NOW peer-to-peer protocol System Memory – 8 MB octal PSRAM Storage 32 MB octal SPI flash microSD card slot Display – 2.13-inch Color AMOLED with 502 x 410 resolution Audio ICS-43434 MEMS microphone 1W MAX98357A speaker amp USB – […]

M5Stack Cardputer-Adv
Posted on

M5Stack Cardputer-Adv ESP32-S3 computer gains improved antenna, larger 1,750 mAh battery, ES8311 audio codec

In 2023, M5Stack introduced the Cardputer, a mini portable computer based on an ESP32-S3 module and equipped with a display and a keyboard. The Cardputer-Adv is an update based on the Stamp-S3A core module, with the same 1.14-inch LCD and 56-key keyboard, but featuring a range of upgrades. These include enhanced audio with an ES8311 audio codec, a high‑SNR MEMS microphone, an NS4150B amplifier, a 1W speaker, and a 3.5 mm headphone jack, an improved antenna design, a larger 1,750 mAh battery, and a built-in BMI270 6-axis IMU. M5Stack Cardputer-Adv specifications: (bold highlights show improvements/changes over the original Cardputer) Wireless MCU module – M5Stack M5Stamp S3A with SoC – Espressif Systems ESP32-S3FN8 CPU Dual-core 32-bit Xtensa LX7 microcontroller with AI vector instructions up to 240MHz RISC-V ULP co-processor Memory – 512KB SRAM Storage – 8MB flash Wireless – 2.4GHz WiFi 4 (802.11b/g/n), Bluetooth 5.0 BLE + Mesh 2.4GHz 3D antenna USB […]

Advertisement

LILYGO T 2CAN ESP32 S3 dual CAN development board top
Posted on

LILYGO T-2CAN upgrades TTGO T-CAN485 with ESP32-S3, dual Isolated CAN Bus

LILYGO T-2CAN is an updated version of the earlier TTGO T-CAN485, with a more powerful ESP32-S3 MCU and two isolated CAN bus interfaces. Like its predecessor, it is designed for vehicle diagnostics, industrial CAN monitoring, and wireless CAN-to-cloud gateways. The board features an ESP32-S3 MCU with 16MB Flash and 8MB PSRAM, along with two MCP2515 CAN controllers supporting CAN V2.0B at up to 1 Mb/s. It also offers Qwiic connectors and a 26-pin GPIO header (unpopulated) for expansion, and supports both USB Type-C (5V) and DC (12–24V) power inputs. Additional features include BOOT and RESET buttons, an external antenna connector, and onboard debugging via USB. LILYGO T-2CAN specifications: ESP32-S3-WROOM-1U wireless module SoC –  ESP32-S3 dual-core Tensilica LX7 microcontroller @ up to 240 MHz with 2.4 GHz 802.11n WiFi 4 and Bluetooth 5.0 LE connectivity Memory – 8MB PSRAM Storage – 16MB SPI flash IPEX antenna connector Industrial control interfaces via 2x  […]

Espressif EchoEar Smart AI Development Kit
Posted on

Espressif’s EchoEar ESP32-S3 voice-controlled AI chatbot runs esp-brookesia firmware

Espressif Systems’ EchoEar is a compact ESP32-S3 AI chatbot designed for voice interaction and edge AI applications, for smart toys, voice-enabled speakers, and control systems. It features a 1.85-inch circular touch display, a dual microphone array with local wake-word detection, and support for large AI models from OpenAI, Xiaozhi AI, and Gemini. The kit is built around the ESP32-S3-WROOM-1 Wi-Fi 4 and Bluetooth 5 module, and also integrates a 3W speaker for audio interaction, and a microSD card slot for data storage. Other hardware features include a BMI270 IMU, a green LED, a USB-C port, a magnetic connector, and a battery management chip. Espressif EchoEar Specifications Wireless Module – ESP32-S3-WROOM-1 SoC – Espressif Systems ESP32-S3R8 CPU – Dual-core Tensilica LX7 up to 240 MHz with vector extension for AI/ML workloads RAM – 512KB SRAM, 8MB PSRAM ROM – 284KB Wireless – WiFi 4 and Bluetooth LE 5 Storage – 16MB […]

Boardcon MINI1126B-P AI vision system-on-module wit Rockchip RV1126B-P SoC