You searched for WLED - Page 3 of 26 - CNX Software

June 19, 2025

HackLED Pro LED controller – An Adafruit Sparkle Motion alternative with WS2812 and RGBCW LED support

HACK Lab HackLED Pro is an Adafruit Sparkle Motion-like LED controller that runs a custom version of WLED and supports both WS2812 and RGBCW LEDs, making it ideal for DIY lighting projects, smart home setups, and audio-reactive light displays. Built around an ESP32 MCU, this board includes 2-way WS2812 LED outputs, 5 PWM channels (RGBCW), and an onboard silicon microphone for music reactive LED setup. Like the Sparkle Motion, the outputs of this board are level-shifted, and there’s also a power switch that toggles the output power between 5V and 12V. The board features a USB-C port with a PD controller, with which you can power and program the board. The controller is housed in a thermally protected 3D printed case and is also compatible with the generic version of the WLED firmware. HackLED Pro specifications: Wireless module – ESP32-WROOM-32E-N4 WiFi and Bluetooth module with 4MB Flash LED Control 2x […]

April 10, 2025April 10, 2025

Altech DO-1 Modbus monitor connects to up to 128 Modbus RTU/TCP devices

US-based Altech Corp has recently announced the DO-1 universal monitor for Modbus devices to enable companies to easily monitor, collect, and analyze their equipment and process data such as temperature, humidity, pressure, vibration, and energy usage without any subscription fees or licenses. The DO-1 is a vendor-agnostic solution that connects to up to 128 RTU-TCP Modbus devices, features 5GB of internal data storage expandable up to 128GB with a microSD card, dual Ethernet, and optional WiFi and Bluetooth connectivity. The device also implements dual power input with a 12V/24V DC input via a terminal block, and 5V via micro USB as power backup. Altech DO-1 specifications: Storage 5GB for data storage (I assume from 8GB eMMC flash) MicroSD card slot up to 128GB Networking 10/100Mbps Fast Ethernet RJ45 port (LAN1) Gigabit Ethernet RJ45 port (LAN2) LAN1 and LAN2 can be configured in switch or 2-port mode Optional WiFi 802.11 b/g/n […]

iW-RainboW-G54S credit card-sized OSM SBC

February 5, 2025February 5, 2025

iWave Systems iW-RainboW-G54S credit card-sized SBC features an STM32MP133/MP135 OSM Size-S module

iWave Systems iW-RainboW-G54S is a credit card-sized SBC fitted with an OSM Size-S (30x30mm) system-on-module based on STM32MP133 or STM32MP135 Cortex-A7 SoC with up to 1GB RAM, and up to 128GB flash. Interfaces include a Gigabit Ethernet port, a USB Type-A port, an 18-bit RGB LCD display interface, and three 100-pin high-density connectors for additional I/Os. The iW-RainboW-G54S SBC is designed for industrial applications with a temperature range of -40 to +85°C. While it’s fitted with an OSM Size-S module, we’ll also notice the carrier board has a footprint for OSM Size-M (45x30mm) and OSM Size-L (45x45mm) modules indicating it will be used with other OSM modules in the future. iWave Systems iW-RainboW-G54S specifications: System-on-Module – iW-RainboW-G54M SoC (one or the other) STMicro STM32MP133 single-core Cortex-A7 with or without Secure boot + Cryptography; for headless applications STMicro STM32MP135 single-core Cortex-A7 with or without Secure boot + Cryptography; supports LCD-TFT parallel […]

January 6, 2025January 5, 2025

PicoPD Pro – An open-source RP2040 development board with USB PD support up to 30V

The PicoPD Pro is an open-source Raspberry Pi RP2040 development board that integrates USB PD support up to 30V, and features like voltage negotiation and power delivery while still retaining the Raspberry Pi Pico functionality. It features the AP33772S USB-C PD3.1 sink controller from Diodes Incorporated. The AP33772S supports the full USB-C PD 3.1 specification, including Extended Power Range (EPR) / Adjustable Voltage Supply (AVS) up to 28V and Programmable Power Supply (PPS) up to 21V. The PicoPD Pro USB PPS/AVS development board is ideal for powering devices with specific requirements, such as motor control boards, LED drivers, custom battery chargers, and other high-power applications. It also features a 5V rail output for less demanding applications. It can also be used as an AP33772S evaluation board. We have previously seen other USB-C PD solutions like the Spark Analyzer, YULC LED Controller, and USB Insight Hub which may serve a similar […]

November 18, 2024November 18, 2024

$29 Banana Pi BPI-CanMV-K230D-Zero features Kendryte K230D RISC-V SoC for AIoT applications

The Banana Pi BPI-CanMV-K230D-Zero is a compact and low-power single-board computer built around the Kendryte K230D dual-core XuanTie C908 RISC-V chip with an integrated third-generation Knowledge Process Unit (KPU) for AI computation. It follows the form factor of the Raspberry Pi Zero or Raspberry Pi Zero 2W board and targets IoT and ML applications. The SBC comes with 128MB of LPDDR4 RAM and uses a microSD card slot for storage. Additional features of this board include dual MIPI-CSI camera inputs for 4K video, a 40-pin GPIO header for I2C, UART, SPI, PWM, and more. Wireless features include 2.4GHz WiFi, USB 2.0 with OTG, and microphone support. These features make this SBC suitable for applications such as AI tasks such as image, video, and audio processing. Banana Pi BPI-CanMV-K230D-Zero Specifications SoC – Kendryte K230D CPU CPU1 – 64-bit RISC-V processor @ 1.6GHz with RVV 1.0 support CPU2 – 64-bit RISC-V processor […]

July 25, 2024

TinyWatch S3 is an open-source, customizable smartwatch powered by ESP32-S3 SoC

The TinyWatch S3 is an ESP32-S3 development board in a smartwatch form factor from Seon Rozenblum, also known as Unexpected Maker. It is powered by the ESP32-S3 wireless microcontroller with 8MB quad SPI flash storage and 2MB of additional QSPI PSRAM. It features a 240 x 280 LCD with capacitive touch (via a CST816T module) and several onboard sensors including a 6-axis inertial measurement unit, a magnetometer, and a MEMS microphone. It has a USB-C port for power, programming, and charging a connected LiPo battery (250mAh or 500mAh). While the product’s firmware is still in active development, it is usable as a watch and even a daily driver. The TinyWatch S3 is described as a “wrist-wearable ESP32-S3 development board” but lacks pin headers and is not breadboard compatible. The hardware is open-source but the product is mostly useful for firmware development, testing, and other general projects. The firmware is being […]

July 24, 2024July 23, 2024

LOLIN S3 Mini Pro – A tiny ESP32-S3 board with a 0.85-inch display and a multi-color PCB

LOLIN S3 Mini Pro is a tiny ESP32-S3 WiFi and BLE board with a 0.85-inch display and it’s one of the first boards I’ve seen with a multi-color PCB that some PCB manufacturers have been offered recently. The board features an ESP32-S3FH4R2 microcontroller with 4MB flash and a 2MP PSRAM, a 128×128 TFT display, a 6-axis motion/attitude sensor, and GPIO headers that make it compatible with LOLIN D1 mini shields for expansion. LOLIN S3 Mini Pro specifications: SoC – Espressif Systems ESP32-S3FH4R2 CPU – Dual-core Tensilica LX7 microcontroller @ up to 240 MHz Wireless – 2.4 GHz 802.11n WiFi 4 and Bluetooth 5.0 LE connectivity Memory – 2MB PSRAM Storage – 4MB SPI flash Display – 0.85-inch 128×128 LCD TFT display with GC9107/GC9A01 driver Sensor – 6-axis MEMS IMU/attitude sensor (QMI8658C) Expansion 2x 8-pin headers with up to 12x GPIO, ADC, DAC, I2C, SPI, UART, USB OTG; compatible with LOLIN […]

June 28, 2024June 27, 2024

Zigbee Coordinator CC2652P7 1.0 runs open-source firmware, works with Zigbee2MQTT, Home Assistant, and ioBroker

The cod.m Zigbee Coordinator 1.0 (CZC 1.0) is a hybrid ZigBee coordinator that can be used to connect devices over a network (Ethernet/Wi-Fi) and USB. The ZigBee Coordinator version 1.0 is an upgrade of version 0.2 released in 2022. The CZC 1.0 replaces the Texas Instruments CC2652P2 chip with the much more powerful CC2652P7 chip, uses an ESP32-WROOM-32E module instead of the USR-K6 chip, and adds compatibility with Home Assistant (ZHA integration). It can create a Zigbee network and pair Zigbee devices over Ethernet, WiFi, or Serial (USB). It features the same Texas Instruments CC2652P7 chip as the SMLIGHT line of Zigbee Ethernet/WiFi/USB coordinators and USB dongles. There are two models of the CZC 1.0: a Power over Ethernet model and a model that can only be powered via USB-C. cod.m Zigbee Coordinator specifications: Zigbee SoC – Texas Instruments CC2652P7 Arm Cortex-M4F microcontroller @ 48 MHz with 704 KB flash, […]