Posted on

TTGO T5 is an ESP32 WiFi + Bluetooth Board with ePaper Display and Speaker

Lilygo has made another ESP32 board part of their TTGO family with TTGO T5 board powered by Espressif System ESP32 WiFI & Bluetooth SoC, and offering a choice of ePaper displays from 1.54″ to 2.9″, as well as built-in speaker. TTGO T5 board specifications: SoC – Espressif ESP32 dual core Tensilica LX6 processor with WiFi 802.11 b/g/n and Bluetooth 4.1 LE Storage – micro SD card slot Display (one of the other) 1.54″ 200×200 black & white ePaper display; Full refresh time – 2 seconds 2.13″ 250×122 black & white ePaper display; Full refresh time – 2 seconds 2.7″ 264×176 black & white ePaper display; Full refresh time – 6 seconds 2.9″ 296×128 black & white ePaper display; Full refresh time – 2 seconds Viewing angle – >170° Power Consumption – Refresh: 26.4mW(typ.); standby: <0.017mW Connected via SPI interface Audio – Mini Speaker Expansion – 24-pin header with GPIO, UART,  […]

Posted on

2.9″ ESPaper Lite Kit is a $40 ePaper Display Kit with an ESP8266 WiFi Module

Squix (Daniel Eichhorn) has designed a 2.9″ ESPaper Lite Kite is a battery powered kit based on a black and white ePaper module, and ESP-WROOM-02 module based on Espressif Systems ESP8266 WiSoC. 2.9″ ESPaper Lite Kit specifications: Wireless Module – ESP-WROOM-02 WiFi module with Espressif ESP8266 Display – 2.9″ B&W ePaper module with 296×128 pixels resolution connect over SPI to ESP8266 Debugging / Programming – 6-pin serial port header USB – 1x micro USB port for programming Misc – 3 buttons: Reset (wake up from deep sleep);  S0 (flash/GPIO0); S1: user button connected to GPIO12; power switch; charging and (firmware) flashing LEDs Power – JST connector for LiPo battery; charging circuit You’ll need a 3.3V USB to TTL debug board for flashing the firmware to the board, and a LiPo battery to power it up. The solution is particularly useful if you want a battery powered display that is infrequently […]

Advertisement
Posted on

Yotaphone 2 Smartphone Features an Improved AMOLED + ePaper Dual Display

About two years ago, Yota , a technology company based on Russia, introduced the Yotaphone, an Android smartphone with an innovative dual display solution comprised of a standard color display on the front, and an E-ink display on the back, in order to extend battery life. The idea was interesting, but the phone did not look that great. But with Yotaphone 2, the company upgraded the processor with a Snapdragon 800 processor, a larger 5″ display, and if the back ePaper display looks as crisp and clear in real life as in the picture below, you could have a winner, and copycats will eventually show up. Yotaphone 2 specifications: SoC – Qualcomm Snapdragon 800 quad-core Krait processor @ 2.2 GHz with Adreno System Memory – 2GB RAM Storage – 32GB eMMC Displays Front – 5″ AMOLED touch screen, 1920×1080 resolution,16M colors, 442ppi, with Corning Gorilla glass 3. Rear – 4.7”  […]

Inkplate 13Spectra
Posted on

Inkplate 13SPECTRA 13.3-inch E-ink Spectra smart color display supports Arduino, MicroPython, ESPHome (Crowdfunding)

Soldered Electronics has made ESP32-based e-paper displays for years, starting with the launch of the Inkplate 6 in 2019. The Inkplate 13SPECTRA is their latest model based on an ESP32-S3 WiFi and Bluetooth SoC and a 13.3-inch E-Ink Spectra color display with 1600 x 1200 resolution. More specifically, it’s powered by an ESP32-S3-WROOM-2-N32R16V module with 32MB SPI flash and 16MB PSRAM, features a microSD card slot for data storage, a USB-C port for data and power, a JST connector for an optional 3,000 mAh LiPo battery, and expansion capabilities through three Qwiic connectors and GPIO expander pins. Inkplate 13SPECTRA specifications: Wireless module – ESP32-S3-WROOM-2-N32R16V SoC – ESP32-S3 dual-core Xtensa LX7 processor (up to 240 MHz) with wireless connectivity System Memory – 16 MB PSRAM Storage – 32 MB flash Wireless –  Wi-Fi 802.11 b/g/n (2.4 GHz), Bluetooth 5 (LE), Storage – MicroSD card slot Display 13.3-inch E-Ink SPECTRA color e-paper […]

TOPST D3-G SBC
Posted on

TOPST D3-G maker SBC is powered by Telechips TCT8050 “Dolphin3” Cortex-A72/A53/R5 automotive-grade SoC

TOPST D3-G is a single board computer (SBC) powered by a Telechips TCT8050 “Dolphin3/3M” 9-core automotive-grade SoC with four Cortex-A72 cores, four Cortex-A53 cores, and one real-time Cortex-R5 core. The board features 4GB or 8GB LPDDR4 RAM, 32GB eMMC flash and a microSD card for storage, a Gigabit Ethernet port, a DisplayPort 1.2 connector capable of driving four display through MST, two MIPI CSI connectors, a PCIe Gen3x 1 slot, a few USB ports, a 40-pin GPIO header compatible with Raspberry Pi HAT+, and three CAN Bus interfaces. TOPST D3-G specifications: SoC  – Telechips TCC8050 (Dolphin3) CPU(45,180 DMIPS​) Quad-core Arm Cortex-A72 @ 1.69 GHz, 31,840 DMIPS​ Quad-core Arm Cortex-A53 @1.45 GHz, 13,340 DMIPS​​ Real-time MCU core – Arm Cortex-R5 @ 600 MHz GPU – Imagination Technologies PowerVR 9XTP (GT9524) delivering up to 168 GFLOPS; Supported APIs: OpenGL ES 1.1 / 2.0 / 3.2, Vulkan 1.2, OpenCL 2.0 / 3.0 System […]

Happy New Year 2026 CNX Software
Posted on

Year 2025 in Review, CNX Software stats, and looking ahead to 2026

Time for the last post of 2025, as the year is almost over. I’ll look back at key developments and notable products launched in 2025, share some CNX Software website traffic statistics, and look ahead to 2026. Year 2025 in Review After 22 product releases in 2024, Raspberry Pi calmed down a little bit in 2025, and the highlights of the year included the Raspberry Pi 500+ mechanical keyboard, the 5-inch variant of the Raspberry Pi Touch Display 2, and a Raspberry Pi 5 1GB RAM. What didn’t quite stop were the accessories from third parties for Raspberry Pi SBC and Raspberry Pi Pico boards. The most exciting Arm SoC release of 2025 was probably the 12-core CIX P1 Armv9 SoC found in Radxa Orion O6 SBC, MINISFORUM MS-R1 Arm mini PC, and Orange Pi 6 Plus board, but while performance was fine, it was overhyped in 2024, and software […]

Advertisement

XIAO Soil Moisture Sensor review
Posted on

XIAO Soil Moisture Sensor review with Home Assistant

Seeed Studio sent us a review sample of the XIAO Soil Moisture Sensor powered by the XIAO ESP32C6 wireless module and running on a single AA battery. Designed for ultra-low power consumption, it’s supposed to offer long-lasting operation with dynamic adjustment of monitoring intervals. It’s preloaded with ESPHome firmware and is fully compatible with Home Assistant. It’s ideal for indoor plants monitoring, but it can’t be used outdoors since the 3D printed enclosure is not weatherproof. In this review, we’ll start with an unboxing, do a quick teardown, and test it with Home Assistant to receive a notification on our smartphone when the soil is dry. XIAO Soil Moisture Sensor specifications Wireless module – XIAO ESP32C6 Wireless MCU – Espressif Systems ESP32-C6 CPU 32-bit RISC-V core up to 160 MHz Low-power RISC-V core up to 20 MHz Memory – 512 KB SRAM, 16KB low-power SRAM Storage – 320 KB ROM, 4MB […]

Waveshare RPi-Zero-PhotoPainter-ACCE
Posted on

7.3-inch full color e-paper wooden photo frame is designed for the Raspberry Pi Zero

Waveshare RPi-Zero-PhotoPainter-ACCE is a 7.3-inch color e-paper photo frame designed for the Raspberry Pi Zero family. It’s an 800×480 resolution display based on E-Ink Spectra 6 (E6), and housed in a wooden frame. The display also features an RTC with backup battery support, a LiPo battery connector with “UPS circuitry”, a USB-C port for power, a 3-pin debug/serial header, a power button, and a charging LED. It supports portrait and landscape orientation on the desk thanks to a rotatable stand and wall mounting through a hook hanger. RPi-Zero-PhotoPainter-ACCE specifications: Display – E-Ink Spectra 6 (E6) Full-color display with Black, White, Green, Blue, Red, and Yellow Resolution – 800×480 pixels Pixel Pitch – 0.2 x 0.2mm Viewing Angle – > 170° Refresh Time Full refresh – 12s Partial refresh – Not supported Grayscale – Two shades of gray Dimensions – 160 x 96mm Expansion – 40-pin HAT connector to connect Raspberry […]

Boardcon MINI1126B-P AI vision system-on-module wit Rockchip RV1126B-P SoC