CNX Software - Embedded Systems News

July 5, 2017July 5, 2017 by Jean-Luc Aufranc (CNXSoft) - 15 Comments

Supermicro A2SDi-2C-HLN4F Server Mini-ITX Motherboard is Based on Intel Atom C3338 “Denverton” Processor

Almost exactly one year ago, I wrote about Intel Atom C3000 Series “Denverton” processor based on the same Goldmont architecture used in Apollo Lake processor, and used in an early GIGABYTE MA10-ST0 server motherboard prototype. The latter is not out yet, but according to a YouTube video, the 16-core motherboard should be launched in H2 2017. In the meantime, Supermicro also made their own Denverton motherboard based on a lower-end Atom C3338 dual core processor. Supermicro A2SDi-2C-HLN4F board specifications: Processor – Intel Atom C3338 dual core Denverton processor @ 1.50 / 2.20 GHz with 4 MB cache; 9W TDP System Memory Up to 64GB Register DIMM RDIMM and DDR4-1866MHz Up to 32GB Unbuffered ECC/non-ECC UDIMM, DDR4-1866MHz, in 2 DIMM slots Storage – 4x SATA 3 ports, but up to 8x SATA 3 (6 Gbps) ports are configurable; N.B.: total combined PCI-E lanes and SATA ports is up to 8 Connectivity […]

July 5, 2017July 4, 2017 by Jean-Luc Aufranc (CNXSoft) - 39 Comments

$45 Hisilicon Hi3535 Based Network Video Recorder Board Comes with HDMI, VGA, Dual SATA, GbE, and USB 3.0 Ports

Network Video Recorder (NVR) boards allow you to record videos from IP cameras to a SATA drive, and display them in a mosaic for monitoring & security. One of such boards is XiongMai NBD7024T-P powered by a Hisilicon Hi3535 dual core Cortex A9 processor, and featuring Gigabit Ethernet, SATA, and USB 3.0 interfaces, on top of HDMI and VGA video output and stereo audio output. With such features, this type of board could likely be re-purposed for other applications, such as a NAS setup too,and they are fairly inexpensive going for $45 including shipping on Aliexpress. NBD7024T-P NVR board specifications: SoC – Hisilicon Hi3535 dual core Cortex A9 processor @ 1.0 GHz System Memory – 4Gbit (512MB) RAM Storage – 2x SATA ports up to 8TB each, maybe some SPI flash for firmware Video Output – 1x HDMI, 1x VGA Audio Output – 2x RCA jacks for stereo audio Video […]

July 4, 2017 by Jean-Luc Aufranc (CNXSoft) - No Comments

HDFury Vertex is a High-End HDMI 2.0 Splitter, Scaler, and Diagnostic Tool

Most people won’t need this, but if you are working on HDMI, HDFury Vertex HDMI 2.0b splitter and scaler could be a very useful product. It comes with one HDMI 2.0b input port, two HDMI 2.0b output ports, some audio ports, an OLED display showing EDID, HDR, and other information, and a Windows tool allowing you to find out the full details about your HDMI connection over USB. HDFury Vertex hardware specifications: HDMI revision: HDMI 2.0b (Level A) 600Mcsc – 18Gbps Max Resolution: 4K60 4:4:4 8b, 4K60 4:2:2 12b, 4K120 4:2:0 8b or 8K30 4:2:0 8b I/O – 2 HDMI In, 2 HDMI Out, IR, RS232, USB, Analog Jack, Optical Out. Upscale port – FHD 1080p to UHD 2160p & 4K/DCI Downscale port – UHD 2160p & 4K/DCI to FHD 1080p Signal Conversion – Resolution, Chroma Subsampling, Color Space, Color Depth, HDCP HDCP Conversion – Any HDCP to any HDCP […]

July 4, 2017 by Jean-Luc Aufranc (CNXSoft) - 7 Comments

Sonoff B1 is an $18 Hackable WiFi RGB LED E27 Light Bulb based on ESP8285 WiSoC

Earlier this year, I wrote about an ESP8266 based RGB LED “AI Light” lightbulb that was hacked to run ESPurna open source firmware. That’s all good, except some people tried to get one, and ended with a different hardware. So if you’d like something that’s more of a “sure thing”, ITEAD Studio has designed Sonoff B1 dimmable RGB LED E27 light bulb based on ESP8285 processor, and with a “4 pads” to allow for custom firmware flashing. Sonoff B1 hardware specifications: Typical Lumen Output – 600lm Beam Angle – 120 degrees typ. Color Temperature – 2800K-6500K & RGB full color Connectivity – WiFi 802.11 b/g/n @ 2.4GHz Power Supply – 90-260V AC 50/60Hz via E27 base Power Consumption – Light off: 0.5W Max; rated power: 6W Temperature Range – Operating: 0ºC~ 40ºC; storage: -20ºC~ 80ºC Operating Humidity – 5%-90% RH Sonoff B1 with stock firmware can be controlled using the […]

July 4, 2017July 4, 2017 by Jean-Luc Aufranc (CNXSoft) - 25 Comments

ROCK64 and UDOO X86 Boards and Accessories are Now Available for Purchase

Pine64 ROCK64 is a development board powered by Rockchip RK3328 quad core processor, while UDOO X86 board is based on Intel Atom x5-E8000 or Celeron N3160 processor plus a Quark SE MCU. What do they have common? Not much, except both boards are now officially available for sale. Just a quick reminder of the specifications for ROCK64 board: SoC – Rockchip RK3328 quad core Cortex A53 processor with ARM Mali-450MP2 GPU System Memory – 1, 2, or 4 GB LPDDR3 Storage – eMMC flash module socket + micro SD card slot + 128 Mbit SPI flash Video & Audio Output – HDMI 2.0a up to 4K @ 60 Hz with HDR10 and HLG support, 3.5mm AV port (composite video + stereo audio) Video Codec – 4K VP9, H.265 and H.264, 1080p VC-1, MPEG-1/2/4, VP6/8 Connectivity – Gigabit Ethernet USB – 2x USB 2.0 ports, 1x USB 3.0 port Expansion Headers […]

July 4, 2017July 6, 2017 by Jean-Luc Aufranc (CNXSoft) - 218 Comments

Ebox T8 V Octa-core Android TV Boxes Giveaway

Entertainmentbox.com has contacted me asking whether I’d be interested in hosting a giveaway for two Ebox T8 V TV boxes with S77 Pro air mouse on CNX Software, and I thought it was a good idea, so here we are. EBox T8 V is an Amlogic S912 TV box running Android 6.0 with some pre-installed apps specifically geared towards to UK market like BBC iPlayer, and FilmOn, as well as a 2.5″ SATA bay. It also comes with IPVanish app which I successfully tried to watch UK programs, and I had overall a positive experience with the device as I reported in Ebox T8 V review, with the main problems being the lack of audio license and support for HDMI pass-through. I also know somebody who uses the previous model – Ebox T8 IV – as their main streaming device, and he was pretty happy about it after several months […]

July 3, 2017July 3, 2017 by Jean-Luc Aufranc (CNXSoft) - 8 Comments

How to Install RKMC “Kodi for Rockchip” App in your TV Box

I’ve started playing with Vorke Z3, an Android 6.0 TV box based on Rockchip RK3399 , and saying that Kodi 17.3 – installed from the Google Play Store – is not working so well is an understatement. The other Rockchip TV boxes I’ve recently reviewed with Android 6.0.1 such as Yundoo Y8 and A95X R2 are all using TVMC, a fork of Kodi 16.1 specifically designed for Rockchip devices. However, there’s no source code for that app, but a Rockchip engineer is maintaining his own fork of Kodi, with the code and some binaries libraries released on Github. The project is called RKMC. I did install the app, but I misunderstood part of the instructions at first, and the device would not boot anymore. I lost many hours of work, as I had to reflash the firmware. So I’ll show how I installed it in Vorke Z3 TV box. You […]

July 3, 2017June 18, 2018 by Jean-Luc Aufranc (CNXSoft) - 6 Comments

Linux 4.12 Release – Main Changes, ARM & MIPS Architectures

Linus Torvalds has just released Linux 4.12: Things were quite calm this week, so I really didn’t have any real reason to delay the 4.12 release. As mentioned over the various rc announcements, 4.12 is one of the bigger releases historically, and I think only 4.9 ends up having had more commits. And 4.9 was big at least partly because Greg announced it was an LTS kernel. But 4.12 is just plain big. There’s also nothing particularly odd going on in the tree – it’s all just normal development, just more of it that usual. The shortlog below is obviously just the minor changes since rc7 – the whole 4.12 shortlog is much too large to post. In the diff department, 4.12 is also very big, although the reason there isn’t just that there’s a lot of development, we have the added bulk of a lot of new header files […]