CNX Software - Embedded Systems News

July 3, 2017July 3, 2017 by Jean-Luc Aufranc (CNXSoft) - 8 Comments

How to Install RKMC “Kodi for Rockchip” App in your TV Box

I’ve started playing with Vorke Z3, an Android 6.0 TV box based on Rockchip RK3399 , and saying that Kodi 17.3 – installed from the Google Play Store – is not working so well is an understatement. The other Rockchip TV boxes I’ve recently reviewed with Android 6.0.1 such as Yundoo Y8 and A95X R2 are all using TVMC, a fork of Kodi 16.1 specifically designed for Rockchip devices. However, there’s no source code for that app, but a Rockchip engineer is maintaining his own fork of Kodi, with the code and some binaries libraries released on Github. The project is called RKMC. I did install the app, but I misunderstood part of the instructions at first, and the device would not boot anymore. I lost many hours of work, as I had to reflash the firmware. So I’ll show how I installed it in Vorke Z3 TV box. You […]

July 3, 2017June 18, 2018 by Jean-Luc Aufranc (CNXSoft) - 6 Comments

Linux 4.12 Release – Main Changes, ARM & MIPS Architectures

Linus Torvalds has just released Linux 4.12: Things were quite calm this week, so I really didn’t have any real reason to delay the 4.12 release. As mentioned over the various rc announcements, 4.12 is one of the bigger releases historically, and I think only 4.9 ends up having had more commits. And 4.9 was big at least partly because Greg announced it was an LTS kernel. But 4.12 is just plain big. There’s also nothing particularly odd going on in the tree – it’s all just normal development, just more of it that usual. The shortlog below is obviously just the minor changes since rc7 – the whole 4.12 shortlog is much too large to post. In the diff department, 4.12 is also very big, although the reason there isn’t just that there’s a lot of development, we have the added bulk of a lot of new header files […]

July 3, 2017July 3, 2017 by Jean-Luc Aufranc (CNXSoft) - 24 Comments

$25 NanoPi NEO Plus2 Board Adds 8GB Flash, WiFi & Bluetooth, More RAM, and an extra USB Port

NanoPi NEO 2 board has just got an update with NEO Plus2 board featuring the same Allwinner H5 processor and Gigabit Ethernet connectivity, but FriendlyELEC updated the RAM from 512MB to 1GB, added an 8GB eMMC flash, a WiFi & Bluetooth module, and an extra USB port. NanoPi NEO Plus2 specifications: SoC – Allwinner H5 quad core Cortex A53 processor with an ARM Mali-450MP GPU System Memory – 1 GB DDR3 Storage – 8GB eMMC flash (Samsung KLM8G1WEPD-B031) + micro SD card slot Connectivity – Gigabit Ethernet (via RTL8211E-VB-CG chip), 802.11 b/g/n WiFi and Bluetooth 4.0 (via Ampak AP6212A wireless module) USB – 2x USB 2.0 host ports, 1x micro USB port (for power only), 2x USB via headers Expansion headers 24-pin header with I2C, 2x UART, SPI, and GPIOs 12-pin header with 2x USB, IR pin, I2S, and GPIOs 5-pin audio 2.0mm pitch header with microphone and LINE out […]

July 2, 2017July 3, 2017 by Jean-Luc Aufranc (CNXSoft) - 49 Comments

The First Amlogic S912 Development Board is Coming Soon with Khadas VIM2

We have a decent choice of Amlogic S905 development boards like ODROID-C2 or NanoPi K2, but I was recently asked whether I knew of any Amlogic S912 development boards. I’m sure Amlogic has one for internal development, but those are hard to get, and probably expensive, and while you could probably get an S912 TV box board those lack I/Os, and software support may truly be a challenge. So I’m pleased to announce that Shenzhen Wesion will soon provide an update to their Khadas VIM Pro board with Khadas VIM2 powered by Amlogic S912 octa-core processor. The company will actually offer three variants of Khadas VIM2 boards (Basic/Pro/Max) specifications with highlights in bold showing differences with Khadas VIM Pro board: SoC – Amlogic S912 octa core ARM Cortex-A53 @ up to 1.5 GHz with ARM Mali-820MP GPU System Memory Basic – 2 GB DDR4 Pro/Max – 3 GB DDR4 Storage […]

July 1, 2017 by Jean-Luc Aufranc (CNXSoft) - 31 Comments

Orange Pi i96 96Boards IoT Edition WiFi & Bluetooth Development Board Finally Launched for $8.80

Orange Pi i96 board was first unveiled at Linaro Connect US 2016 in September of that year, as one of the first boards compliant with 96Boards IoT Edition specification, and expected to sell for just $9.99. The good news is that the board is now finally available for $8.80 plus shipping on Aliexpress ($12.19 in total in my case) Orange Pi i96 specifications: SoC – RDA Micro 8810PL ARM Cortex A5 processor @ up to 1.0 GHz with 2Gbit (256 MB) on-chip LPDDR2 RAM, 4Gbit (512 MB) on-chip SLC NAND flash , 256KB L2 cache, and Vivante GC860 3D GPU External Storage – micro SD slot Connectivity – WiFi 802.11 b/g/n + Bluetooth 2.1/EDR module (RDA5991) Camera – MIPI CSI-2 connector for camera sensor up to 5MP Video – 1080p30 H.264 encoding USB – 1x USB host port, 1x micro USB OTG port Expansion – 40-pin GPIO header with SPI, […]

June 30, 2017 by Jean-Luc Aufranc (CNXSoft) - No Comments

Husarion CORE2 STM32 Board for Robotics Projects Works with ESP32, Raspberry Pi 3, or ASUS Tinkerboard

Husarion CORE2 is a board designed to make robotics projects simpler and faster to complete with pre-configured software and online management. Projects can start using LEGOs, before moving to 3D printed or laser-cut version of the mechanical parts without having to spend too much time on the electronics and software part of the project. Two versions of the board are available: CORE2 combining STM32 MCU with ESP32 WiFI & Bluetooth module, and CORE2-ROS with STM32 instead coupled to a Raspberry Pi 3 or ASUS Tinkerboard running ROS (Robot Operating System). Both solutions share most of the same specifications: MCU -STMicro STM32F4 ARM CORTEX-M4 MCU @ 168 MHz with 192 kB RAM, 1 MB Flash External Storage – 1x micro SD slot USB – 1x USB 2.0 host port with 1A charging capability; 1x micro USB port for debugging and programming via FTDI chip Expansion Headers hRPi expansion header for CORE2-ROS […]

June 30, 2017July 2, 2017 by Jean-Luc Aufranc (CNXSoft) - 6 Comments

H3Droid Android Firmware is Designed for Allwinner H3 Boards & Devices

Allwinner H3 boards such as Orange Pi PC and NanoPi NEO are mostly interesting due to their ability to run Linux and control I/Os, and while they also support Android, most people wanting to run Android are better served with TV boxes instead, as they come with enclosure, power supply, HDMI cable, and an IR remote control. That does not mean there’s no use case for Android on development boards, and that’s why probably KotCzarny, and other developers, have decided to work on H3Droid project to provide better Android images for Allwinner H3 boards and devices than the firmware released by manufacturers. Some of the improvements include “sane DRAM/CPU settings”, support for Custom recovery system, Google Play Store and more USB network adapters, as well as the removal of apps and feature unusable for people outside out China. You’ll also be able to access the board via SSH if you […]

June 30, 2017July 31, 2017 by Jean-Luc Aufranc (CNXSoft) - 12 Comments

VIA ALTA DS 4K Digital Signage Player is Powered by Zhaoxin ZX-2000M Quad Core Cortex A17 Processor

VIA has just announced their latest ALTA DS 4K digital signage player with a “quad core Cortex A17 processor”, which I first assumed must be Rockchip RK3288 processor since it’s one of the few with that processor core. But the processor is actually from a company I had never heard before: Shanghai Zhaoxin Semiconductor that does both x86 and ARM SoCs for various markets. But let’s check out the product with VIA ALTA DS 4K Digital Signage specifications: SoC – Zhaoxin ZX-2000M quad core ARM Cortex-A17 processor @ up to 1.4GHz with 2D/3G GPU supporting OpenGL ES 3.0, and a video processing unit System Memory – 2GB DDR3 @ 1600MHz Storage – 8GB eMMC Flash memory, SD card slot Video Output – HDMI 1.4 with CEC support Video Codecs – MPEG-2, VC-1, H.264 and H.265 video decoding up to 3840x2160p @30fps; H.264 encoding Connectivity – 1x Gigabit Ethernet port (Realtek RTL8211FS-CG), […]