CNX Software - Embedded Systems News

April 18, 2017April 19, 2017 by Jean-Luc Aufranc (CNXSoft) - 20 Comments

GIGABYTE GA-J3455N-D3H Apollo Lake Mini-ITX Motherboard Comes with 2x Gigabit Ethernet Interfaces, 4x SATA Ports

GIGABYTE has introduced an update to Bay Trail based GA-J1900-D3V and Braswell based GA-N3150N-D3V motherboards with the launch of GIGABYTE GA-J3455N-D3H mini-ITX motherboard powered by an Intel Celeron J3455 Apollo Lake processor, and equipped with two Gigabit Ethernet ports, four SATA interfaces, and support for up to 16GB RAM. GA-J3455N-D3H specifications: SoC – Intel Celeron J3455 quad core processor @ 1.50 / 2.3 GHz with 12EU Intel HD Graphics 500, 2 MB Cache; 10W TDP System Memory – 2x DDR3L SO-DIMM sockets supporting up to 16 GB RAM; Dual channel; DDR3L 1866/1600/1333 MHz non-ECC memory modules supported Storage 2x SATA 6Gb/s connectors (SATA3 0 & 1) via SoC, 2x SATA 6Gb/s connectors (SATA3 2 & 3) via ASMedia ASM1061 chip 1x 64 Mbit flash for licensed AMI UEFI BIOS with PnP 1.0a, DMI 2.7, WfM 2.0, SM BIOS 2.7, ACPI 5.0 Video Output 1x D-Sub port (VGA) supporting a maximum […]

April 18, 2017April 18, 2017 by Jean-Luc Aufranc (CNXSoft) - No Comments

Qualcomm Tricorder XPRIZE Selects Two Winners for Commercial Medical Tricorders

Healthcare takes around 10% of worldwide GDP, and while in some cases an increase in the healthcare to GDP ratio means better care for people, in other cases it may lead to a decrease in the population’s living standards. There are political, business, and legal issues involved in the costs, but overtime I’m confident that technology can both improve care and lower the costs, in some instances dramatically, especially if open source designs become more common, and there’s some work in that respect with open source projects for prosthetics, opthalmoscope, and even surgical robots. Some commercial projects also aim(ed) to lower the costs of diagnosis tools such as Sia Lab’s medical lab dongle or Scanadu medical tricorder. The latter project sadly did not manage to pass FDA approval, and the company will stop supporting it on May 15, 2017, but that does not mean others have given up on developing […]

April 18, 2017September 21, 2018 by Jean-Luc Aufranc (CNXSoft) - 43 Comments

RDA Micro RDA8810 Android SDK with Linux & U-boot Source Code for Orange Pi 2G IoT Board Released

Orange Pi 2G IoT board was released a couple of weeks ago, shortly followed by Android and Ubuntu images, but since it was not based on Allwinner, but an RDA Micro 8810PL processor, we did not have any source code so far, which can be a real problem for a development board… Shenzhen Xunlong has now managed to upload a 6.7GB Android SDK to MEGA, with the link published via Orange Pi Resources page. MEGA has a download limit which depends on how much traffic they get at the time, and after 5.3 GB download, I was asked to register for a PRO account, or wait for four hours before resuming the download. If you want to avoid this limit for any large MEGA download, you can run megadl instead. That’s what I did in Ubuntu 16.04 (remember to escape any special characters with \):

sudo apt install megatools
megadl https://mega.nz/#F\!59EVmKAZ\!5FdBb2dQIMcxgY2h16nGPg

1 2	sudo apt install megatools megadl https://mega.nz/#F\!59EVmKAZ\!5FdBb2dQIMcxgY2h16nGPg

Once the download is […]

April 17, 2017April 17, 2017 by Jean-Luc Aufranc (CNXSoft) - 5 Comments

PocketBone Board Based on Octavo Systems OSD3358 SiP Fits into an “Altoids Smalls” Mint Tin Box

Last year, Octavo Systems introduced OSD3358 System-in-Package (SiP) that includes Texas Instruments Sitara AM3358 processor, 256MB to 1GB RAM, a PMIC and an LDO into a single package. Since then the SiP has been found in BeagleBone Black Wireless and BeagleBone Blue, and at the time of launch there was also some development around PocketBone, a tiny open source hardware Smalls mint tin sized board based on OSD3358, which is smaller than a CHIP board, but a little bigger than NanoPi NEO board. There’s now been some progress with prototypes of the board manufactured with the following specifications: SiP (System-in-Package) – Octavo Systems OSD3358 with TI Sitara AM3358 ARM Cortex-A8 processor @ up to 1 GHz, PowerVR SGX530 GPU, PMIC + LDO, and 512MB DDR3 Storage – micro SD slot USB – 2x micro USB port one for power, one OTG port Expansion – 10-pin header (unpopulated) with SPI, I2C, […]

April 17, 2017 by Jean-Luc Aufranc (CNXSoft) - 4 Comments

Bben to Launch an Apollo Lake HDMI TV Stick Powered by Intel Celeron N3450 Processor

Intel is planning to launch “Michigan City” Apollo Lake Compute Sticks sometimes with year, but Bben, after launching MN17A Apollo Lake mini PC, may be able to launch their own Celeron N3450 TV stick before Intel does, as Netbook Italia reports the company showcased such product at the Hong Kong Global Sources Electronics Fair. Bben Micro computer specifications: SoC – Intel Celeron N3450 quad core processor @ 1.1 GHz / 2.2 GHz, 12 EU Intel HD graphics 500 @ 200 MHz / 700 MHz; 6W TDP System Memory – 2 to 4GB DDR3 Storage – 32 or 64 GB eMMC flash + micro SD slot Video Output – HDMI port (likely limited to 1.4 version with 4K @ 30 Hz max resolution/framerate) Audio – HDMI + 3.5mm audio jack Connectivity – Dual band 802.11 b/g/n/ac WiFi, and Bluetooth 4.2 USB – 2x USB 3.0 ports Misc – Fan and ventilation […]

April 17, 2017 by Jean-Luc Aufranc (CNXSoft) - 5 Comments

Mirabook is Laptop Dock for Smartphones, Development Boards (Crowdfunding)

Motorola Lapdock may have been ahead of its time, as laptop docks for smartphone are back in vogue with products like NexDock, and Apple could soon launch their own iPhone laptop dock. Another option is Miraxess Mirabook laptop dock with a 13.3″ display, and a battery lasting up to 24 hours, that works for smartphones, development boards, and HDMI TV sticks thanks to its USB type C port. Mirabook specifications: Display – 13.3″ IPS display with 1920×1080 resolution (non-touch, except if they raise $2 millions…) Audio – Speakers, 3.5mm audio jack Video Output – HDMI port Storage – SD card slot QWERTY keyboard & multi-touch trackpad USB Integrated USB type C cable to connect to phone, board or HDMI TV stick USB type C port to charge the Mirabook battery 2x USB type A host port Battery – TBD capacity good for 24 hours while charging your phone Dimensions – […]

April 16, 2017 by Jean-Luc Aufranc (CNXSoft) - 13 Comments

Wandboard QuadPLUS Development Board Gets i.MX 6QuadPlus Processor, 802.11ac WiFi and Bluetooth 4.1

The first Wandboard development boards launched in 2012 nearly 5 years ago based on Freescale i.MX6 Solo and Dual processor, with Wandboard Quad launched a few months later. The boards were fairly popular at the time due to their better specifications, and especially Freescale’s much better documentation and software compared to the competition such as Broadcom (Raspberry Pi) and Allwinner (Cubieboard). Since the boards are based on TechNexion EDM system-on-modules they could also be used by companies working on their own products based on the system-on-module. It’s also a good platform if you want to test various version of Android, because the company released Jelly Bean, Kitkat, Lollipop, and Marshmallow images for the boards, and I’m expecting a Lollipop version soon. However, albeit the company worked on other NXP boards such as PICO-IM6UL Android Things, there had not been any hardware upgrade for Wandboard for nearly 4 years, but last […]

April 15, 2017April 15, 2017 by Jean-Luc Aufranc (CNXSoft) - 7 Comments

MAXOAK K2 Laptop Power Bank Review – Part 2: Tests with Laptops, Phones and Development Boards

MAXOAK K2 is a large capacity (50,000 mAh) power bank designed for laptop with ~20V and 12V outputs, but it can also charge USB devices thanks to its 4 USB ports. Since I’ve already checkout the device and specifications in the first part of the review, I’ll report results from my tests with the power bank in the last couple of weeks. Since the power bank had some charge, more exactly between 50 and 75% (2x LEDs on, 1x LED blinking, 1x LED off), I decided to start by charging my phone, Vernee Apollo Lite, which is equipped with a 3,180 mAh battery. So I connected the phone to one of the two 5V/2.1A USB port, together with USB Charger Doctor to monitor voltage and current, and with 50% charge, the phone would draw around 5.07V @ 1.15 A. Note that the voltage and amperage will change depending on battery […]