You searched for RS485 Raspberry Pi 5 - CNX Software

Raspberry Pi 5 Industrial Computer Kit RS485 RS232 CAN Bus

May 19, 2026May 19, 2026

$60 kit transforms the Raspberry Pi 4/5 into a DIN Rail industrial computer with isolated RS232, RS485, and CAN Bus

Waveshare’s “Isolated RS232 / RS485 / CAN / CAN FD Expansion Board For Raspberry Pi” kit transforms your Raspberry Pi 4B or 5 into an industrial computer with a DIN rail or wall mount enclosure. The solution also provides access to isolated interfaces, including two RS485, RS232, CAN FD, and CAN Bus interfaces, as well as 7-36V DC input through screw terminals. The complete solution also benefits from the Raspberry Pi’s Gigabit Ethernet, four USB ports, and full-size HDMI port (via adapter), as well as support for Raspberry Pi HAT and PCIe expansion boards for NVMe SSD, an additional GbE port, 4G LTE/5G cellular, etc… Specifications: Compatible SBCs – Raspberry Pi 4B and Raspberry Pi 5 Host interface – SPI + UART Isolated industrial interfaces via screw terminals 1x CAN FD with 5kbps ~ 8 Mbps baudrate via MCP2518FD + MCP2562FD chips 1x CAN Bus with 5kbps ~ 1 Mbps […]

April 10, 2026April 14, 2026

Feature-rich Raspberry Pi CM5 carrier board offers dual Ethernet, quad RS485, 4G LTE/5G connectivity, and more

Waveshare CM5-ETH-RS485-4G-BASE Raspberry Pi CM5 carrier board offers plenty of features such as GbE and 2.5GbE RJ45 jacks, optional 4G LTE/5G connectivity, terminal blocks for RS485, relay, and digital outputs, and more. The board also features a 4K-capable HDMI output, an M.2 Key-M socket for an NVMe SSD or AI accelerator, two MIPI DSI/CSI connectors, ten status and user LEDs, and a wide 7-36V DC power input. Waveshare CM5-ETH-RS485-4G-BASE specifications: Supported system-on-modules – All Raspberry Pi Compute Module 5 variants with up to 16GB RAM, 64GB eMMC flash, Wireless Storage Optional NVMe SSD via M.2 Key-M socket MicroSD card socket for Compute Module 5 Lite only Video Output HDMI 2.0 port up to 4K resolution 2x MIPI DSI connectors (multiplexed with MIPI CSI) Camera I/F – 2x MIPI CSI connectors (multiplexed with MIPI DSI) Networking Gigabit Ethernet RJ45 port 2.5GbE RJ45 port Optional WiFi 5 and Bluetooth 5.2 on Raspberry […]

Raspberry Pi CM5 industrial computer features RS485/RS232/CAN Bus/DIO interfaces, dual Ethernet, optional 4G/5G cellular module

Waveshare IPCBOX-CM5 is an industrial-grade mini computer built around the Raspberry Pi CM5, featuring RS485, RS232, CAN Bus, and DI/DO terminal blocks, dual Ethernet, an M.2 socket for NVMe SSDs or AI accelerators, and a wide 7V to 36V DC power input. The system is compatible with all CM5 variants and integrates GbE and 2.5GbE ports, a 4K-capable HDMI video output, multiple USB 3.2/2.0 ports, and an M.2 B-Key slot plus a Nano-SIM card slot for 4G LTE/5G cellular modules. Other features include microSD card support for Raspberry Pi CM5 Lite models, a PWM fan header, a buzzer, an audio jack, an RTC battery header, and a speaker connector. Housed in an aluminum alloy case with heat-dissipation fins, the unit also supports DIN-rail and VESA mounting for industrial control, IoT gateways, smart factory systems, network appliances, and remote monitoring deployments. Waveshare IPCBOX-CM5 Specifications: Compatibility – Raspberry Pi Compute Module 5 (CM5 […]

August 3, 2025August 3, 2025

EdgeLogix-1145 – A Raspberry Pi CM5-based PLC with dual GbE, RS485, RS232, 24V DI/DO, and analog inputs

OpenEmbed EdgeLogix-1145 is a Raspberry Pi CM5-based PLC (Programmable Logic Controller) with two Gigabit Ethernet ports and a terminal block with RS232, RS485, 24V DI/DO, and analog inputs operating in the 0 to 10V range. The DIN rail-mountable controller also features an HDMI output port, a microSD card slot, a USB 3.0 port, a USB-C port, support for WiFi 5, Bluetooth 5.0, and 4G LTE connectivity, and a local bus with GPIOs and SPE (Single Pair Ethernet). EdgeLogic-1145 specifications: SoM – Raspberry Pi CM5 SoC – Broadcom BCM2712 CPU – Quad-core Cortex-A76 @ 2.4 GHz GPU – VideoCore VII Memory – 1GB, 2GB, 4GB, or 8GB RAM Storage – 0GB (CM5 Lite), 8GB, 16GB, or 32GB eMMC flash Wireless – Optional WiFi 5 and Bluetooth 5.0 Storage – MicroSD card slot for CM5 Lite module Video Output – HDMI port up to 4Kp60 Networking 2x Gigabit Ethernet ports, one native, […]

July 11, 2025

Industrial 6-Channel RP2350 relay module offers RS485 interface, Raspberry Pi Pico HAT support

Waveshare RP2350-Relay-6CH is a Raspberry Pi RP2350-based industrial 6-channel relay module with an isolated RS485 interface, 7 to 36V DC input via a terminal block, and support for Raspberry Pi Pico HATs. Each relay is isolated and can handle 250VAC/30VDC up to 10A, a USB-C port is used for firmware updates, and the module also includes a buzzer, a few LEDs, as well as Reset and BOOT buttons, with everything housed in a DIN-Rail enclosure. Waveshare RP2350-Relay-6CH specifications: Microcontroller – Raspberry Pi RP2350B CPU Dual-core Arm Cortex-M33 @ 150 MHz with Arm Trustzone, Secure boot OR Dual-core RISC-V Hazard3 @ 150 MHz Either two cores can be used. Memory – 520 KB on-chip SRAM Package – QFN-80 Relay – 6x relays Contact rating – ≤10A 250VAC/30VDC Contact form – 1NO 1NC via screw terminals Optocoupler isolation USB – USB Type-C port for power, data, and firmware flashing Serial Isolated RS485 […]

December 11, 2024December 12, 2024

EDATEC ED-IPC3100 Raspberry Pi CM5-based industrial computers offers RS232/RS485, dual Ethernet, 4G LTE, and more

EDATEC ED-IPC3100 is a range of four DIN-Rail mountable industrial computers based on the new Raspberry Pi CM5 (Compute Module 5) with two Ethernet ports, and various RS232 or RS485 COM port options depending on the selected model. The ED-IPC3100 computers are offered with the CM5 with up to 16GB LPDDR5, 64GB eMMC flash, and optional WiFI 5 and Bluetooth 5. All also feature one HDMI port, two USB 2.0 ports, 9V to 36V DC input, and the EDC-IPC3120 model also adds a 3.5mm audio jack and internal connectors for a speaker, MIPI DSI and HDMI video output interfaces, and a MIPI CSI camera. EDATEC ED-IPC3100 specifications: SoM – Raspberry Pi CM5 SoC – Broadcom BCM2712 quad-core Cortex-A76 processor @ 2.4GHz with VideoCore VII GPU System Memory – 2GB, 4GB, 8GB, or 16GB LPDDR4-4267 SDRAM Storage – Options for 16GB, 32GB, or 64GB eMMC flash Wireless – Optional dual-band WiFi […]

April 2, 2024

6-channel ESP32-S3-based WiFi relay module offers RS485 interface, supports Raspberry Pi Pico HATs

Waveshare ESP32-S3-Relay-6CH is a 6-channel WiFi and Bluetooth relay module based on Espressif Systems ESP32-S3 wireless microcontroller that also supports RS485 control and comes with headers taking Raspberry Pi Pico HATs adding RTC, CAN Bus, RS232, LoRa, sensors, or other features. The relays are rated 250VAC/30VDC up to 10A, the system take 7V to 36V DC input through a terminal block, and can be programmed with Arduino or MicroPython though a USB-C port. It also features a a built-in buzzer, an RGB LED, and is housed in a DIN Rail-mountable ABS case. Waveshare ESP32-S3-Relay-6CH specifications: Wireless module – ESP32-S3-WROOM-1U-N8 by default MCU – ESP32-S3 dual-core Tensilica LX7 up to 240 MHz with 512KB SRAM Storage – 8MB Quad SPI flash Wireless – 2.4 GHz WiFi 4 and Bluetooth LE 5 u.FL connector for external antenna 6x relays via terminal blocks Rating – Up to 10A 250V AC / 30V DC […]

March 17, 2024March 17, 2024

7-inch Raspberry Pi CM4-based industrial HMI offers gigabit Ethernet, RS485 Modbus, digital and analog inputs

NORVI RPI-HMI is an industrial controller with a 7-inch touchscreen screen display powered by a Raspberry Pi CM4 and equipped with a range of interfaces including a gigabit Ethernet RJ45 port, a few USB ports, and several terminal blocks for RS485 (Modbus), digital and analog input, transistor outputs, and 24V DC power input. The new Raspberry Pi CM4-based HMI announcement follows the NORVI ESP32-HMI controller that was launched last December with an ESP32-S3 wireless microcontroller and a 5-inch LCD display with resistive touch. The NORVI RPI-HMI builds on that with a much faster Arm processor, a larger display with a capacitive touchscreen, gigabit Ethernet, and a wider range of I/Os that makes it suitable for various industrial HMI and PLC applications. NORVI RPI-HMI Industrial Controller specifications: SoM – Raspberry Pi CM4 SoC – Broadcom BCM2711 quad-core Cortex-A72 processor with VideoCore GPU System Memory – 1GB, 2GB, 4GB or 8GB LPDDR4-3200 […]