You searched for Raspberry Pi form factor - Page 2 of 85 - CNX Software

July 14, 2026

$50 Forgix board pairs Raspberry Pi RP2354 MCU with Trion T8 FPGA in Teensy form factor

Adiuvo Engineering’s Forgix is a development board pairing a Raspberry Pi RP2354 microcontroller with 2MB flash and an Efinix Trion T8 FPGA in the Teensy 4.0 form factor. The board also features a 16 Mbit PSRAM chip, a USB-C port, a push-button, an RGB LED, and through and castellated holes routed to either the RP2354 MCU or Trion T8 FPGA for SPI, I2C, UART, ADC, USB 1.1, and custom interfaces. Forgix board specifications: SoC – Raspberry Pi RP2354B CPU Dual-core Arm Cortex-M33 @ 150 MHz with Arm Trustzone, Secure boot Dual-core 32-bit RISC-V Hazard3 @ 150 MHz (3-stage in-order pipeline; RV32IMAC with Zba, Zbb, Zbs, Zbkb, Zcb, Zcmp, and Zicsr extensions) Up to two cores can be used at a time, either 2x Arm, 2x RISC-V, or 1x Arm + 1x RISC-V Memory – 520 KB on-chip SRAM Storage – 2MB of stacked (in-package) flash memory FPGA – Efinix Trion T8F49 connected to […]

April 15, 2026April 16, 2026

Orange Pi Zero 3W – An Allwinner A733 SBC in Raspberry Pi Zero form factor

Orange Pi Zero 3W is Raspberry Pi Zero-sized SBC powered by an Allwinner A733 octa-core Arm Cortex-A76/A55 SoC paired with up to 16GB of LPDDR5 RAM, a microSD card slot, and footprints for eMMC flash or UFS storage. Other features include a 4K-capable mini HDMI port, two USB-C ports, one with DP 1.4 Alt mode, a MIPI DSI display connector, two MIPI CSI camera connectors, a WiFi 6 and Bluetooth 5.4 module, and a 40-pin GPIO header. OrangePi Zero 3W specifications: SoC – Allwinner A733 CPU Dual-core Arm Cortex-A76 @ up to 2.00 GHz Hexa-core Arm Cortex-A55 @ up to 1.79 GHz Single-core RISC-V E902 real-time core up to 200 MHz GPU – Imagination Technologies BXM-4-64 MC1 GPU with support for OpenGL ES 3.2, Vulkan 1.3, OpenCL 3.0 VPU 8Kp24 H.265/VP9/AVS2 decoding 4Kp30 H.265/H.264 encoding AI accelerator – 3 TOPS NPU System Memory – 1GB, 2GB, 4GB, 8GB, 12GB, or […]

Clintech Pico – The first Raspberry Pi RP2354B board offers 48 GPIOs in Raspberry Pi Pico form factor

Designed by Clintech Ltd. in Bulgaria, the Clintech Pico Board appears to be the first development board based on the Raspberry Pi RP2354B chip with 2MB on-chip flash. It retains the same form factor as a Raspberry Pi Pico 2 but adds extra GPIOs to make use of the 48 general-purpose GPIOs provided by the RP2354B chip. Like the Raspberry Pi Pico 2, this board features 40 castellated and through holes on the sides, exposing GPIOs 0–22 and 26–28, along with 3 debug pins. Additionally, the board includes 27 extra on-board through holes that break out the remaining GPIOs (23–25 and 29–47) as well as the QSPI interface (SD0–SD3 and SCLK) for external memory. Clintech Pico specifications: SoC – Raspberry Pi RP2354B CPU Dual-core Arm Cortex-M33 @ 150 MHz with Arm Trustzone, Secure boot Dual-core 32-bit RISC-V Hazard3 @ 150 MHz (3-stage in-order pipeline; RV32IMAC with Zba, Zbb, Zbs, Zbkb, Zcb, Zcmp, and […]

August 25, 2025September 22, 2025

Centron CT1832 Real.Pi – A Realtek RTD1619B SBC based on Raspberry Pi 3 Model B form factor

Centron Design’s CT1832 Real.Pi is a RealTek RTD1619B SBC that mainly follows the Raspberry Pi 3 Model B form factor and is designed for AIoT applications, vehicle-mounted central control, entertainment/game equipment, and digital signage. It follows the RTD1619B-powered XpressReal T3 SBC based on a smaller form factor, which was introduced a few weeks ago by Fyde Innovations, with support for the Chromium-based FydeOS operating system. The CT1832 Real.Pi board is equipped with 4GB RAM, 16GB eMMC flash, an HDMI 2.0 port, a Gigabit Ethernet port with optional PoE, optional dual-band WiFi and Bluetooth 4.2 module, a 16-pin PCIe x1 connector, and a 40-pin GPIO header, among other features. CT1832 Real.Pi specifications: SoC – Realtek RTD1619B CPU – Quad-core Arm Cortex-A55 @ up to 1.7GHz GPU – Arm Mali-G57 MP1 with support for Vulkan 1.1, OpenGL ES 3.2, OpenCL 2.0 VPU Decoding 4Kp60 AV1, H.265/EVC, and VP9.2, all with HDR support […]

Icepi Zero Lattice LFE5U FPGA board Raspberry Pi Zero form factor

August 21, 2025August 28, 2025

Icepi Zero – A Lattice ECP5 FPGA board in Raspberry Pi Zero form factor (Crowdfunding)

The Icepi Zero is a compact Lattice ECP5 FPGA open-source hardware development board following the Raspberry Pi Zero form factor, and equipped with a microSD card slot, three USB-C ports, a GPDI mini connector for video output, and a 40-pin GPIO header. I was confused at first, since Debashis wrote about the Pico2-ice board a few days ago, but it’s a different design with an RP2350B MCU and a Lattice ICE40U5K FPGA with 5.3K LUTs. Made by Icy Electronics, the Icepi Zero is a pure FPGA board with 24K LUTs, 32MB SRAM, and 16MB QSPI flash that can be used for retro gaming/computer and general FPGA gateware experimentation. Icepi Zero specifications: FPGA – Lattice Semi ECP5U 24k LUTs 112 KiB of RAM 28x 18 x 18 Multipliers Memory – 256 Mbit (32 MB) of 166 MHz SDRAM Storage 128 Mbit (16 MB) of QSPI Flash microSD card slot Video Output […]

July 8, 2025July 10, 2025

RP2350-PiZero – An RP2350 board with Raspberry Pi Zero form factor, mini HDMI, 16MB flash

Waveshare RP2350-PiZero is an update of the RP2040-PiZero, keeping the Raspberry Pi Zero form factor, but replacing the RP2040 MCU with the more powerful RP2350 dual-core Cortex-M33/RISC-V microcontroller. The RP2350-PiZero still comes with 16MB flash, a mini HDMI/DVI connector, two USB Type-C ports, a microSD card slot, and a 40-pin GPIO header. It supports 5V power input via USB-C, as well as LiPo batteries via a 2-pin connector and a charging circuit. RP2350-PiZero specifications: MCU – Microcontroller – Raspberry Pi RP2350B CPU Dual-core Arm Cortex-M33 @ 150 MHz with Arm Trustzone, Secure boot OR Dual-core RISC-V Hazard3 @ 150 MHz Either two cores can be used. Memory – 520 KB on-chip SRAM Package – QFN-80 Memory – PSRAM chip footprint (7) Storage 16MB SPI flash MicroSD card slot Video – Mini HDMI port that can output DVI signals USB 1x USB Type-C port (3) for data using PIO-USB host/device implementation […]

May 3, 2025May 3, 2025

Walnut Pi 2B is an Allwinner T527 octa-core SBC with Raspberry Pi 5 form factor and interfaces

Walnut Pi 2B is a single board computer (SBC) powered by an Allwinner T527 octa-core Cortex-A55 SoC with a built-in 2 TOPS AI accelerator that closely follows the Raspberry Pi 5 design for compatibility with most HAT+ expansion boards and accessories. The Walnut Pi 2B SBC ships with 1GB to 4GB LPDDR4 RAM, an optional 32GB eMMC flash, and features a microSD card slot, gigabit Ethernet, four USB ports, a WiFI and Bluetooth module, MIPI DSI/CSI connectors, and the same PCIe FFC connector as found on the Raspberry Pi 5, and a 40-pin GPIO. One of the most obvious differences is that it only comes with one micro HDMI port instead of two on the Pi 5. Let’s check out the specifications to find other changes. Walnut Pi 2B specifications: SoC – Allwinner T527 CPU Octa-core Arm Cortex-A55 processor with four cores @ 1.80 GHz and four cores @ 1.42GHz […]

April 2, 2025

P42 Pico2 M.2 – A Raspberry Pi RP2350 board in M.2 form factor

The P42 Pico2 M.2 may look like an M.2 module, but it’s actually a Raspberry Pi RP2350 development board in M.2 2230 form factor whose edge connector exposes USB, UART, I2C, and control I/Os. The board ships with a 2MB SPI flash and complies with voltage levels defined by the M.2 specification, with some of the interfaces running on 1.8 V. The SWD interface, +3.3 V, GND, and 16 IOs are accessible on castellated pins, and there’s also a QWIIC connector for I2C modules, but it’s not populated by default. The board also comes with a microSD card slot on the bottom and the usual Reset and BOOT buttons. P42 Pico M.2 specifications: SoC – Raspberry Pi RP2350A CPU Dual-core Arm Cortex-M33 @ 150 MHz with Arm Trustzone, Secure boot OR Dual-core RISC-V Hazard3 @ 150 MHz Up to two cores can be used in any combination Memory – 520 […]