CDEBYTE ECB32 Series Multi core Heterogeneous Allwinner T527 SBC
Posted on

Raspberry Pi-like Allwinner A527/T527 industrial SBC features dual camera support and AI acceleration

EBYTE has recently released an Allwinner A527/T527-based Raspberry Pi-like industrial SBC with dual camera and AI features, with a design very similar to the Walnut Pi 2B, and to a lesser extent, the Orange Pi 4A. It is designed for embedded, IoT, and smart commercial applications. The board supports up to 4GB LPDDR4 RAM, 32GB eMMC storage, and MicroSD card expansion. Display options include HDMI 2.0 and a 4-lane MIPI DSI interface enabling dual 4K output, while two 4-lane MIPI CSI connectors allow simultaneous camera inputs. Connectivity options include Gigabit Ethernet, Wi-Fi 4, Bluetooth 4.2, and a PCIe 2.1 x1 slot for high-speed expansion. It also features four USB 2.0 ports, a Type-C power interface, and a 40-pin Raspberry Pi-compatible GPIO header. EBYTE Allwinner A527/T527 SBC specifications: SoC – Allwinner T527 (industrial) / Allwinner A527 (commercial) CPU Octa-core Arm Cortex-A55 processor with four cores @ 1.80 GHz (T527) or 2.0 […]

Banana Pi BPI F4 industrial Edge AI SBC
Posted on

Banana Pi BPI-F4 – An industrial Edge AI SBC powered by Sunplus SP7350 SoC with 4.1 TOPS NPU

The Banana Pi BPI-F4 is a compact industrial-grade Edge AI development board built around the Sunplus SP7350 quad-core Cortex-A55 SoC with a 4.1 TOPS NPU. Compared to the SunPlus SP7021-based BPI-F2S SBC, the new BPI-F4 supports additional interfaces through terminal blocks and is suitable for AI vision, robotics, and control systems. The board supports booting from microSD or onboard eMMC and provides USB 3.0/2.0 ports, HDMI video output, Ethernet, and a MIPI CSI input for an OV5647 camera. Connectivity options include Gigabit Ethernet, Wi-Fi, and Bluetooth. Other features include seven terminal blocks for GPIO, ADC, SPI, I²C, UART, and PWM, jumper-based power and USB mode selection, and automatic boot. Banana Pi BPI-F4 specifications: BPI-F4-Core board SoC – Sunplus SP7350 (C3V) CPU Quad-core Cortex-A55 @ 2.1 GHz Cortex-M4 MCU @ up to 400MHz for always-on sub-system VPU – H.264 video decoding/encoding AI Accelerator – 4.1 TOPS NPU @ 900 MHz (Sometimes […]

Advertisement
Luckfox Lyra Pi Linux Micro Development Board
Posted on

Luckfox Lyra Pi – A Raspberry Pi-like SBC with Rockchip RK3506B triple-core SoC, two Ethernet ports

The Luckfox Lyra Pi is a compact, Raspberry Pi-sized SBC built around the Luckfox Core3506 core board with a Rockchip RK3506B triple-core Cortex-A7 processor with an additional Cortex-M0 core for IoT, edge computing, and industrial control applications. The board features 512MB DDR3L RAM, optional 8GB eMMC flash, a microSD card slot, dual 10/100Mbps Ethernet with optional PoE, MIPI DSI, USB Type-A and Type-C ports, a 3.5mm audio jack, and a 40-pin GPIO header for Raspberry Pi HATs. The SBC also supports Wi-Fi 6 and Bluetooth 5.2, includes an M.2 slot for an optional 4G LTE module, and offers RS-485 and CAN Bus industrial connectivity. Lyra Pi specifications: SoC – Rockchip RK3506B CPU 3x ARM Cortex-A7 core up to 1.5 GHz ARM Cortex-M0 real-time core GPU – 2D GPU only No VPU, no NPU System Memory – 512MB DDR3L Storage Lyra Pi A (W) – 8GB eMMC Lyra Pi B (W) – […]

Axiomtek KIWI330 1.6 inch ultra compact SBC
Posted on

Axiomtek KIWI330 1.6-inch ultra-compact Intel N50 SBC is smaller than a Raspberry Pi

Axiomtek has launched the KIWI330, a 1.6-inch ultra-compact SBC built around the Intel N50 processor. It comes with 4GB LPDDR5 RAM and a 64GB NVMe SSD in a compact 72 x 56 mm form factor, which is even smaller than a Raspberry Pi or the company’s earlier KIWI310 SBC. Despite its tiny size, the SBC features three USB 3.2 Type-C ports (one with DisplayPort), eDP display support, an M.2 Key E 2230 slot for wireless or AI module, and optional MIO expansion modules for COM, LAN, or GPIO. The KIWI330 is suitable for AIoT systems, intelligent gateways, and industrial edge devices. Axiomtek KIWI330 SBC specifications: Alder Lake-N SoC – Intel Processor N50 dual-core processor up to 3.4 GHz with 6MB cache, 16EU Intel UHD Graphics @ up to 750 MHz; TDP: 6W Memory – 4GB LPDDR5 Storage – 64GB NVMe SSD (BGA package) Video Output eDP interface USB 3.2 Gen1 Type-C DP […]

IS4310 Evaluation Board for RaspberryPi
Posted on

Kappa4310Rasp – A Modbus RTU HAT for Raspberry Pi based on IS4310 Slave stack chip

The Kappa4310Rasp is a Raspberry Pi-compatible Modbus RTU HAT designed to evaluate the IS4310 Modbus RTU Slave stack chip. This allows engineers to simulate sensor and actuator interactions using a push-button and RGB LED without requiring a custom board or soldering. The board features an RS-485 interface with two RJ45 connectors for daisy-chaining Modbus networks. The board communicates with the Raspberry Pi over I²C and supports 500 Holding Registers along with Function Codes 3 (Read Holding Registers), 6 (Write Single Register), and 16 (Write Multiple Registers). The HAT operates at 3.3V and includes jumpers to enable or disable onboard I²C pull-ups. Additional features include dedicated Tx/Rx indicator LEDs, a power LED, GPIO-connected RGB LEDs, and a push-button for real-time interaction. Kappa4310Rasp board specifications: Modbus RTU stack chip – IS4310 (I²C interface, 500 Holding Registers) Protocol support – Function Codes 0x03 (Read), 0x06 (Write Single), 0x10 (Write Multiple) Communication – RS485 […]

Luckfox Lyra Zero W
Posted on

Luckfox Lyra Zero W is a small Rockchip RK3506B SBC with MIPI DSI connector, WiFi 6 and Bluetooth 5.2

Luckfox Lyra Zero W is a compact single board computer (SBC) powered by a Rockchip RK3506B triple-core Cortex-A7 SoC and mostly designed for smart wireless HMI with a MIPI DSI connector and a WiFi 6 and Bluetooth 5.2 module. The Raspberry Pi Zero-sized board also features 512MB of RAM and a 256MB SPI flash, a microSD card slot, two USB-C ports, a USB 2.0 connector, and a 40-pin GPIO header for compatibility with (most/some) Raspberry Pi HATs. Luckfox Lyra Zero W specifications: SoC – Rockchip RK3506B CPU Triple-core Arm Cortex-A7 CPU with 1.2 GHz Arm Cortex-M0 core GPU – 2D GPU only No VPU, no NPU Memory – 512MB DDRL3 Storage 256MB SPI NAND flash (W25N02KV) MicroSD card slot Display – 2-lane MIPI DSI connector up to 1280 x 1280 resolution @ 60 Hz Networking – 2.4 GHz WiFi 6 and Bluetooth 5.2 LE  via SKI.WB800DCS module (based on AICSemi […]

Rockchip RK3568, RK3588 and Intel x86 SBCs and SoMs in 2025
ACP 3566 PI and ACP IMX8 PI Raspberry Pi industrial SBCs
Posted on

Avalue ACP-PI – A Raspberry Pi-like industrial SBC family with long-term supply, Rockchip or NXP SoC

Avalue Technology’s ACPI-PI is a Raspberry Pi-compatible, industrial SBC family, starting with the ACP-3566-PI and ACP-IMX8-PI, designed for edge computing and industrial IoT applications with long-term supply. The ACP-3566-PI is built around a Rockchip RK3566 quad-core Cortex-A55 processor with 4GB RAM and 32GB eMMC. Other features include 4K HDMI output, MIPI DSI/CSI, GbE LAN, Wi-Fi, Bluetooth, and a 40-pin GPIO header for UART, SPI, I2C, and RS-232/RS-485 expansion. The ACP-IMX8-PI, on the other hand, is built around an NXP i.MX8M Mini processor (quad Cortex-A53 + Cortex-M4), 4GB LPDDR4, 32GB eMMC, HDMI, MIPI display, and camera support. Additionally, it has four USB 2.0 ports, an SD slot, an audio jack, and GPIO/UART expansion. Measuring 85×55 mm, both boards can be used for smart retail, healthcare, factory automation, and AI edge deployments. ACP-3566-PI specifications: SoC – Rockchip RK3566 CPU – Quad-core Cortex-A55 processor @ up to 1.8/2.0 GHz GPU – with Arm […]

Allwinner T113-i SBC
Posted on

Credit card-sized industrial Allwinner T113-i SBC operates in the -40 to 85°C temperature range

Ebyte ECB30-P4T13IA5ME8G-I is a credit card-sized industrial-grade SBC powered by an Allwinner T113-i Cortex-A7 SoC with 512MB DDR3 RAM and 8GB flash, all part of the company’s ECK30-T13IA5ME8G-I  castellated system-on-module. The single board computer is also equipped with a microSD card slot, a gigabit Ethernet port, four USB 2.0 ports, a 3.5mm audio jack, a WiFi 4 module, and the usual 40-pin GPIO header that’s more or less compatible with the one found on Raspberry Pi SBCs. What’s different is the lack of HDMI output, and the board features an MIPI DSI connector instead. Ebyte ECB30-P4T13IA5ME8G-I specifications: System-on-Module – Ebyte ECK30-T13IA1GE8G-I SoC – Allwinner T113-i CPU Dual-core Arm Cortex-A7 clocked at up to 1.2 GHz 64-bit XuanTie C906 RISC-V real-time core DSP – HiFi4 VPU Video decoder – H.265 up to 4K @ 30 FPS, H.264 up to 4K @ 24 FPS, MPEG-1/2/4, JPEG, Xvid, Sorenson Spark up to 1080p60 […]

Boardcon MINI1126B-P AI vision system-on-module wit Rockchip RV1126B-P SoC