You searched for up board - Page 48 of 1030 - CNX Software

November 23, 2011

CIFS/Samba Support, USB Drive and Keyboard/Mouse for Android 4.0

Paul O’Brien, founder of modaco, has created a custom kernel with CIFS/SAMBA support, USB drive and keyboard / mouse support for Galaxy Nexus smartphone running Android 4.0 (ICS). This is a temporary download until MCR (MoDaCo Custom ROM) is released. This should be flashed via ‘fastboot flash boot boot.mck.img’ to a device with an unlocked bootloader. This is designed for devices running the I9250XXKK1 / ITL41D (android-4.0.1_r1) ROM. DOWNLOAD – MD5: adf6bcc42205027952630dcf720beada Source: http://android.modaco.com/topic/348882-23-nov-modaco-custom-kernel-cifs-usb-drives-keyboard-mouse/

November 8, 2011November 8, 2011

Board Bringup: LCD and Display Interfaces – ELCE 2011

Presentation “Board Bringup: LCD and Display Interfaces” by David Anders, Texas Instruments, at Embedded Linux Conference Europe 2011. Board bringup is one of the most under documented aspects of embedded development. This presentation looked at the various display technologies such as DisplayPort, DVI, LVDS, and other LCD interfacing methods with emphasis on how to bringup, debug, and validate them on new hardware. Using a case study, aspects such as interfacing timing, extended display identification data(EDID), and backlight controls have been discussed. Most embedded linux developers at some point in their career will be handed a piece of hardware that is untested. LCD bringup is one of the most challenging assignments for an embedded developer. This presentation intends to provide some core tools and methods for bringup of a new display interface. You can also download the presentation slides

ArmSoM RK3588 AIModule7 NVIDIA Jetson Nano-compatible SOM

May 13, 2025

Jupiter NX SoM – An NVIDIA Jetson Nano/NX alternative powered by SpacemiT K1 octa-core RISC-V SoC

The Jupiter NX is a system-on-module (SoM) powered by a SpacemIT octa-core 64-bit RISC-V SoC that follows NVIDIA’s Jetson Nano / Xavier NX form factor for compatibility with existing carrier boards. Designed by Shenzhen Milk-V Technology, the module supports up to 16GB LPDDR4x memory and 32GB eMMC flash, and integrates two gigabit Ethernet PHYs and a WiFi 6 & Bluetooth 5.2 wireless module. Jupiter NX specifications: SoC – SpacemIT K1/M1 CPU – 8-core X60 RISC-V (RV64GCVB) processor @ 1.6 GHz GPU – Imagination IMG BXE-2-32 @ 819 MHz with support for OpenGL ES3.2, Vulkan 1.3, OpenCL 3.0; 20 GFLOPS VPU H.265, H.264, VP8, VP9, MPEG4, MPEG2 decoder up to 4K @ 60fps H.265, H.264, VP8, VP9 encoder up to 4K @ 30fps Support simultaneous processing 1080p60 encoding + 1080p60 decoding 1080p30 H.264/H.265 encoding + 4Kp30 H.264/H.265 decoding AI performance – 2.0 TOPS (INT8) through “CPU core fusion” RVA 22 Profile […]

May 12, 2025May 12, 2025

Allwinner T113-i industrial gateway supports Ethernet, WiFi, Bluetooth, 4G LTE, offers RS232, RS485, CAN Bus, DI/DO interfaces

MYiR Tech’s MY-EVC700S-V2 is an industrial gateway powered by Allwinner T113-i dual-core Cortex-A7 microprocessor (MPU), and equipped with up to 512MB DDR3, 4GB eMMC flash, and 32KB EEPROM. The fanless industrial-grade gateway offers RS232, RS485, CAN Bus, DO, and DI through terminal blocks, Fast Ethernet, WiFi, Bluetooth, and 4GB LTE connectivity, HDMI and LVDS display interfaces, a few USB ports, and more. MY-EVC700S-V2 specifications: SoC – Allwinner T113-i CPU Dual-core Arm Cortex-A7 clocked at up to 1.2 GHz 64-bit XuanTie C906 RISC-V real-time core DSP – HiFi4 VPU Video decoder – H.265 up to 4K @ 30 FPS, H.264 up to 4K @ 24 FPS, MPEG-1/2/4, JPEG, Xvid, Sorenson Spark up to 1080p60 Video encoder – JPEG/MJPEG up to 1080p60 Package – LFBGA 337 balls, 13 x 13 mm System Memory – 512MB DDR3 Storage 4GB eMMC flash 32KB EEPROM MicroSD card slot Display Interfaces LVDS-to-HDMI interface (optional) LVDS connector […]

May 8, 2025

Everything Presence Lite ESP32-based mmWave presence sensor tracks up to three targets simultaneously

Designed by Everything Smart Home, the Everything Presence Lite is a compact, ESP32-based mmWave presence sensor designed to be easily integrated with Home Assistant open-source home automation framework via ESPHome firmware. This sensor features a 24GHz mmWave sensor designed to track up to three targets simultaneously with real-time distance, speed, and positional data (X, Y coordinates). It supports dynamic zone customization, ambient light sensing using a BH1750 sensor, and acts as a Bluetooth proxy to extend Home Assistant’s Bluetooth range. The sensor comes in an injection-molded case, and the company also provides 3D-printable STL files, which you can customize according to your needs. Key applications include human presence detection, smart lighting automation, home security zone monitoring, HVAC efficiency control, fall detection for the elderly, and much more. Everything Presence Lite specifications: Wireless controller – ESP32-WROOM-32E WiFi and Bluetooth module with 4MB Flash mmWave Sensor Built-in Hi-Link HLK-LD2450 24 GHz ISM […]

Interrupt Linux-based Flipper Zero Alternative

May 7, 2025May 7, 2025

Interrupt – A Linux-based Flipper Zero alternative with WiFi 4, Bluetooth, sub-GHz radios, NFC/RFID reader, IR Tx/Rx (Crowdfunding)

Interrupt is a Raspberry Pi Zero 2 W-based wireless hacking tool that provides a Linux-powered alternative to the popular Flipper Zero with a built-in 3.5-inch touchscreen display and keyboard to easily type commands in the terminal. Besides the WiFI 4 and Bluetooth 4.2 radios from the Raspberry Pi Zero 2 W, the Interrupt also integrates a Texas Instruments CC1001 Sub-GHz wireless MCU working in the 300 to 928 MHz frequency range, an NFC/RFID reader, and an infrared receiver & receiver. The system also provides access to GPIO pins for expansion. Interrupt specifications: Supported SBC – Raspberry Pi Zero 2 W SiP – Raspberry Pi RP3A0 system-in-package with: SoC – Broadcom BCM2710A1 quad-core Arm Cortex-A53 @ 1GHz (overclockable to 1.2 GHz) with VideoCore IV CPU supporting OpenGL ES 1.1, 2.0 graphics Memory – 512MB LPDDR2 Storage – MicroSD card socket Wireless – 2.4GHz IEEE 802.11b/g/n Wi-Fi 4 and Bluetooth 4.2 with […]

Rockchip RK3568, RK3588 and Intel x86 SBCs and SoMs in 2025

May 6, 2025

7-inch ESP32-P4 wireless touchscreen display supports GUITION Designer for LVGL, Arduino and ESP-IDF programming

GUITION JC1060P470C is an ESP32-P4 board with an integrated 7-inch touchscreen display and an ESP32-C6 WiFi 6 and Bluetooth 5 module providing wireless connectivity. The display also features a microSD card for storage, a MIPI CSI connector to add a camera, a few USB-C ports, and two FPC connectors for GPIO expansion. It’s a more integrated version of the ESP32-P4-Function-EV-Board that can be used for HMI applications and that is compatible with the GUITION Designer online design tool to create LVGL-based graphical user interfaces. GUITION JC1060P470C specifications: Microcontroller – Espressif Systems ESP32-P4 CPU Dual-core RISC-V HP (High-performance) CPU @ up to 400 MHz with AI instructions extension and single-precision FPU, 768KB of on-chip SRAM Single-RISC-V LP (Low-power) MCU core @ up to 40 MHz with 8KB of zero-wait TCM RAM Memory – 768 KB HP L2MEM, 32 KB LP SRAM, 8 KB TCM ROM – 128 KB HP ROM, 16 […]

May 5, 2025

KSTR-IMX93 single board computer pairs NXP i.MX 93 SoC with Nordic Semi nRF5340, nRF9151, and nRF7002 wireless chips

Conclusive Engineering KSTR-IMX93 is a single board computer (SBC) powered by an NXP i.MX 93 Cortex-A55/M33 AI SoC and equipped with three Nordic Semi wireless solutions, namely nRF5340 SoC, nRF9151 SiP, and nRF7002 WiFi 6 coprocessor. This allows the board to offer a wide range of wireless and wired connectivity options with Gigabit Ethernet, dual-band WiFi 6, Bluetooth 5.4 LE, Zigbee, Thread, NB-IoT, LTE Cat-M1, and GNSS. In some way, the KSTR-IMX93 is the equivalent of combining a Nordic Thingy:91 X Cellular IoT development platform with an Arm Linux SBC. KSTR-IMX93 specifications: SoC – NXP i.MX 93 CPU Single or dual-core Arm Cortex-A55 up to 1.7 GHz Arm Cortex-M33 up to 250 MHz GPU – PXP 2D GPU with blending/composition, resize, color space conversion NPU – Arm Ethos-U65 NPU @ 1 GHz up to 0.5 TOPS Memory – 640 KB OCRAM w/ ECC Security – EdgeLock Secure Enclave System Memory […]