4k News - Page 50 of 77 - CNX Software

December 12, 2016January 7, 2017 by Jean-Luc Aufranc (CNXSoft) - 7 Comments

Eweat R9 Plus Android TV Box and OpenWrt NAS Review – Part 1: Unboxing and Teardown

Zidoo X9S is getting some competition with Eweat R9 TV boxes based on the same Realtek RTD1295 processor with built-in SATA, Gigabit Ethernet, 4K VP9 and H.265, HDR, and USB 3.0. The company has three R9 models, and they sent me to top of the line R9 Plus with 2GB RAM, 16GB storage, a 3.5″ SATA bay, HDMI input, and dual Gigabit Ethernet ports for evaluation. I’ll start the first part of the review by checking out the hardware inside and out, before testing the firmware in the second part. Eweat R9 Plus Unboxing The device ships in a large package with a handle which can be convenient in brick and mortar shops since the whole package weights about 1.8 kilograms.The package then contains a smaller package will all accessories: a 12V/2.5A power supply, a “Quickly User Guide” (sic.), a HDMI cable, and an IR remote control taking two AAA […]

December 9, 2016 by Jean-Luc Aufranc (CNXSoft) - 12 Comments

Rockchip Introduces RK3228H and RK3228B Processors for IPTV/OTT TV Boxes

Rockchip has just tweeted about their RK3xxx processors family, and two new processors appear to have been included in the list with Rockchip RK3228H quad core Cortex A53 processor and RK3228B quad core Cortex A7 processor both supporting 4K video playback and ouput, as well as HDR. Rockchip RK3228H has many of the same features as Amlogic S905X with a quad core Cortex A53 processor, an ARM Mali-T450 GPU, 4K H.265/H.264 video support, and HDR10/HLG, but it also adds something extra with a USB 3.0 interface. RK3328B is lower end with its quad core A7 processor, but still supports H.265/H.264 up to 4K resolution, and include the usual interfaces such as HDMI, CVBS, and a Fast Ethernet PHY. There may be more details on the press release, but the page won’t load for me right now. Jean-Luc Aufranc (CNXSoft)Jean-Luc started CNX Software in 2010 as a part-time endeavor, before quitting […]

December 8, 2016 by Jean-Luc Aufranc (CNXSoft) - 12 Comments

SDMC DV8219-LTE Android TV Box Comes with a Built-in 4G LTE Modem

Most users connect their TV boxes to the Internet through WiFi or Ethernet, but in some specific use case, such as digital signage in mass transport or in remote locations, it might be useful to get access to cellular networks. We’ve seen a few Android TV boxes with a built-in 3G modem in the past including CS918S and MBX-3G, but the former is based on the rather old Allwinner A31s processor, and the latter did not raise enough found on Indiegogo. But there’s nothing new, as SDMC DV8219-LTE is a more recent TV box powered by Amlogic S905X processor and running Android 6.0, equipped with a 4G LTE modem. SDMC DV8219-LTE TV box specifications: SoC – Amlogic S905X quad core Cortex A53 processor @ up to 1.5 GHz with a Mali-450MP GPU System Memory – 1GB DDR3 SDRAM (2GB as option) Storage – 8GB eMMC flash (4 to 64GB as […]

December 6, 2016December 6, 2016 by Jean-Luc Aufranc (CNXSoft) - 26 Comments

First Intel Apollo Lake J3455/J4205 Processor Benchmarks & Video Tests

Many products powered by Intel Apollo Lake processors have already been announced, but few are actually shipping, and I have yet to get one here. However, AndroidPC.es got hold of ASRock J4205-ITX and J3455-ITX motherboards powered by respectively a Pentium J4205 quad core processor and a Celeron J3455 quad core processor, run a few benchmarks, and tested videos in Windows 10 on the motherboards with Kodi 17 and MPC-HC. Let’s have a look at some of the benchmarks to better understand of what we can expect from Apollo Lake desktop processors. First there’s not that much of a difference between Celeron J3455 (1,771 points) and Pentium 4205 (1,830 points) in PCMark Home Convetional benchmark, however you should clearly feel a boost in performance compared to systems with Intel Cherry Trail x5-Z8300 processor (1,141), and the score is getting fairly close to a mini PC with an Intel Core i3-5005U […]

December 5, 2016 by Jean-Luc Aufranc (CNXSoft) - 6 Comments

Full Specifications for Intel Apollo Lake NUC Mini PC’s NUC6CAYB Board Released

Intel unveiled Intel NUC6CAYS & NUC6CAYH NUCs to be powered by Intel Celeron “Apollo Lake” Jxxx processors, but at the time we did not have the full technical specifications. The company has now published a 66-page technical product specification for NUC6CAYB board used in both mini PCs. Intel NUC Board NUC6CAYB specifications: SoC – Intel Celeron J3455 quad core processor @ 1.5 GHz to 2.3 GHz (burst) with 12EU Intel HD graphics 500 @ 250 to 700 MHz supporting DirectX 9.3/10/11.1/12, OpenCL 1.2, OGLES 3.0, OpenGL 4.3 (10W TDP) System Memory – 2x DDR3L-1600/1833 SO-DIMM supporting up to 8GB DDR3L-1866 in total Storage – 32GB eMMC flash (Sandisk, Hynix or Samsung depending on your luck), 2.5″ SATA3 bay for hard drives up to 9.5mm thick, SDXC slot with UHS-I support Video Output – HDMI 2.0 (4K @ 60 Hz) with HDMI CEC via MegaChips MCDP2800-BCT DisplayPort 1.2a to HDMI 2.0 […]

November 29, 2016November 29, 2016 by Jean-Luc Aufranc (CNXSoft) - 3 Comments

Canon 4K600STZ 4K UHD Laser Projector Delivers up to 6,000 Lumens

At the beginning of the year, I wrote about Texas Instruments’ DLP technology for affordable 4K projectors, and the company’s DLP 0.67″ digital micromirror device (DMD) was expected to be found in 4K projector in the second half of 2016. So I went on Amazon, and I could find lots of “4K UHD projectors” with prices starting at $599, but if we look into details we may find some of those are “4K projector” with a 1280×800 resolution… And many of the ones selling in the $2,000+ range don’t list their native resolution with many able to handle 4K input, but actually projecting at 1920×1080 as can be seen in the table below. The most honest companies promote those models as “projectors with 4K Enhancement”, but if you want a true 4K projector, the cheapest option is probably Sony VPL-VW350ES that goes for close to $10,000 on Amazon. CNET has […]

November 23, 2016November 25, 2016 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

Zidoo Releases Digital Signage SDK for X8 and X9S Android TV Boxes

Zidoo X9S and X8 are Android 6.0 + OpenWrt TV boxes powered by Realtek RTD1295 processor with HDMI input supporting PIP, UDP broadcasting and video recording, which works reasonably well despite some 4K video decoding limitations. The company has now released a “digital signage SDK” – which I’d rather just call a digital signage demo – working on either device on github, but you can still study the source code in order to build your own. Some of the possible features showcased in the demo include: Digital Signage (AD) player as shown above with video, picture and scrolling text Multi Views display (HDMI IN + Video playing + Web browsing) Multi Videos decode Screen rotation Screen zoom in / out Display output resolution switch HDMI IN player HDMI IN picture in picture (PIP) So it’s not a total solution, just an “SDK” showing what can be done with media files, and you’d still have to write your own app managing content updates (from storage or network), as well as some content management software. Two apks are used: […]

November 21, 2016 by Jean-Luc Aufranc (CNXSoft) - 117 Comments

R-Box Pro 3G Android TV Box Review – Part 2: Android 6.0 Firmware

The vast majority of octa-core Android TV Boxes sold on the market comes with 2GB RAM, but Amlogic S912 based R-Box Pro TV box was interesting with its 3GB RAM option (aka R-Box Pro 3G), as I wondered if I would see any noticeable improvements during my tests with the extra RAM. We’ve already confirmed the the hardware comes with 3GB RAM using 2x 1GB + 2x 512MB RAM chips configuration in the first part of the review last month, and it’s now time to check out whether this translates to anything in Android, as well as go through the usual hard-to-get features to work like automatic frame rate switching and HD audio pass-through. First Boot, Firmware Update, and First Impressions One positive with the device is the four USB ports, so this time I did not need an USB hub at all, and connected a USB HDD, two RF […]