TTGO ESP32-S2 WiFi IoT Board Comes with Optional MicroSD Card and Battery Support

TTGO ESP32-S2 ESP32-S

All ESP32-S2 boards I’ve seen so far were from Espressif Systems themselves including ESP32-S2-Saola-1 and ESP32-S2-Kaluga-1, but LilyGO TTGO ESP32-S2 is the first third-party board for sale so far. The tiny board is somewhat similar to ESP32-S2-Saola-1 board and comes in two versions with a similar form factor, but a completely different pinout and the presence of a MicroSD card socket and a battery connector on one of the boards. The simpler board is called “ESP32-S2 ESP32-S-WOOR” and comes with ESP32-S2-WROOM module, while the one with more features is named “TTGO ESP32-S2 ESP32-S ” and features its own circuitry built around ESP32-S2 WiSoC. Both TTGO ESP32-S2 boards share many of the same specifications: SoC – Espressif Systems ESP32-S2 single-core 32-bit Tensilica LX7 processor with 320 kB SRAM, 128 kB ROM, System Memory – 8MB PSRAM Storage – 4MB flash; XY-ESP32-S only: MicroSD card socket Connectivity 2.4GHz 802.11b/g/n WiFi 4 connectivity […]

Ultra-narrow DipDuino Arduino Compatible Board is a Perfect Breadboard Companion

Ultra-narrow Arduino Board for Breadboard

We previously wrote about a uChip DIP-sized Arduino Zero compatible board with 0.3″ spacing between the two rows of pins making it perfect for breadboards as it left four rows on each side of the breadboard. There’s now another similar option with the appropriately named DipDuino board equipped with a Microchip Atmega328P MCU compatible with Arduino  Pro or Pro Mini boards. DipDuino specifications: MCU – Microchip Atmega328P 8-bit AVR MCU with 32KB flash, 1024 Bytes EEPROM, 2KB SRAM USB – 1x Micro USB port for power and programming via CP2104 USB to serial chip Expansion Two rows of headers spaced by 0.3-inch (7.62mm) with up to 21x GPIOs, 5x analog inputs, I2C, SPI, UART, Reset, VCC and GND I/O voltage – 3.3V or 5V (different versions of the board) Misc – RGB LED for power and UART Tx/Rx; reset button Power Supply – 5V via Micro USB port; LDO for […]

UDOO BOLT GEAR AMD Ryzen Embedded V1605B Mini PC with Arduino Subsystem Launched for $399

UDOO BOLT GEAR

UDOO BOLT was one of the first AMD Ryzen Embedded V1000 SBC‘s ever announced with a choice of Ryzen Embedded V1202B or V1605B dual-core/quad-core processor, and a Microchip ATmega32U4 MCU for real-time I/Os and Arduino compatibility. The company has now launched UDOO BOLT GEAR mini PC based on UDOO BOLT V8 SBC at a promotional price of $399 excluding taxes and shipping. [Update:  code VOLUMIOGEAR might work to get a €60 discount] UDOO BOLT GEAR specification: SoC – AMD Ryzen Embedded V1605B quad-core/eight-thread processor @ 2.0GHz (3.6GHz boost) with Radeon Vega 8 graphics with support for Directx 12, OpenCL, OpenGL, Vulkan, H.265 Decode & Encode (8-bit), Vp9 Decode; TDP: 12W to 25W System Memory – 2x DDR4 dual-channel 64-bit SO-DIMM sockets With ECC for up to 32GB RAM @ 2400 Mt/s Storage M.2 Socket Key B 2260 for SATA SSD (also features PCI-e x2) M.2 Socket Key M 2280 for […]

MARK AI Robot Kit Aims to Teach AI & Robotics to 12+ Years Old (Crowdfunding)

MARK AI Robot Kit fot Education

We’ve written about Kendryte K210 RISC-V AI processor, and Sipeed M1 module several times including in our getting started for Maixduino and GroveAI HAT boards for low-power AI inference such as object recognition or face detection using Arduino and Micropython programming. Shenzhen-based Tinkergen, a STEM Education owned by Seeed Studio, has now leveraged the low-cost processor to design MARK AI robot kit, where MARK stands for Make A Robot Kit, in order to processor an educational AI Robotics platform for children ages 12 years old and more. MARK will ship as a kit with the main parts and components including a chassis, a cover, two wheels, stepper motors, a pan-tilt camera with K210 processor, a 2.4″ LCD display, Grove & Arduino compatible MARKduino interface board, some sensors, and six AA batteries. Tinkergen offers pre-trained model to recognized objects like humans, books, pens, or smartphones, as well as traffic signs, numbers […]

Ameba RTL8722DM Cortex-M33/M23 IoT Development Board Now Available for $23.90

Ameba RTL8722DM IoT Development Board

Earlier this year, we noticed some RealTek RTK8720DN dual-band WiFi and Bluetooth 5.0 IoT modules, and quickly mentioned Ameba RTL8722DM development board available for under $50. If you found the price of the board a bit expensive for what it had to offer, the good news is that Ameba RTL8722DM Cortex-M33/M23 IoT development board is now selling for $23.90 on Seeed Studio or Good Display. Ameba RTL8722DM specifications: MCU ARMv8M Real-M300 Cortex-M33 compatible MCU @ 200MHz ARMv8M Real-M200 Cortex-M23 compatible MCU @ 20MHz Memory – 4.5MB embedded SRAM in SoC Storage – 2MB external flash Connectivity Dual-band 802.11 a/b/g/n 1×1 WiFi 4 (20/40MHz) Bluetooth 5 SIG Mesh networking Supports both central and peripheral modes Display – 8-bit LCD  up to 645×645 resolution @ 30FPS or 6-bit LCD up to 527×527 resolution @ 60 FPS Audio Codec – ADC, DAC, I2S Security – Hardware cryptographic engine, Arm Trust-Zone, Secure boot, Wi-Fi […]

Lilygo TTGO T-Watch-2020 is a Nicer Looking Arduino Programmable ESP32 Watch

TTGO T-Watch 2020 V3

We’ve covered several ESP32 watches over the last year include TTGO T-Wristand, Watchy, and DSTIKE ESP32 watch. Those don’t really have the nicest looking design, and some people complained about various shortcomings including the difficulty to customize/program the watch. Last year, Lilygo introduced TTGO T-Watch smartwatch that, due to support for expansion boards, was relatively thick, but at least documentation and Arduino code samples can be found on Github. The company has now launched a slicker version with Lilygo TTGO T-Watch-2000. TTGO T-Watch-2020 specifications: SoC – Espressif ESP32 dual-core wireless processor with 520KB SRAM System Memory – 8MB PSRAM Storage – 16MB QSPI flash Display – 1.54-inch LCD capacitive touch screen Audio – Class-D amplifier, buzzer Connectivity – 802.11b/g/n WiFi 4 and Bluetooth 5.1 via ESP32 Sensors – BMA423 three-axis accelerometer with built-in step counting algorithm, activity recognition / tracking, advanced gesture recognition. Misc – Power button (round),  PCF8563 RTC […]

Teensy 4.1 Board Gets Longer for Ethernet, MicroSD Slot, and More GPIOs

Teensy 4.1 Ethernet

What comes after Teensy 4.0? Teensy 4.1. The new version of the Arduino compatible board is powered by the same NXP i.MX RT1062 Cortex-M7 crossover processor clocked at 600 MHz, but about doubling in length in order to add a 10/100 Mbit Ethernet PHY, a MicroSD card slot, and offer more I/Os. Teensy 4.1 also increases flash memory to 8 MB (vs 2 MB for Teensy 4.0), and the USB hot-plugging power management circuitry needed to plug a USB device via a USB host cable. Teensy 4.1 specifications: SoC – NXP i.MX RT1062 Arm Cortex-M7 processor at 600 MHz with  1024KB RAM (512KB is tightly coupled), Storage – 8 MB serial flash (64KB reserved for recovery & EEPROM emulation), MicroSD Socket, footprints for 2x extra QSPI chips such as flash or 8MB PSRAM chip USB – 1x micro USB port for power and programming Networking – 6-pin Ethernet header via […]

Sipeed MaixCube is a Fully Integrated AI Development Platform Powered by Kendryte K210 RISC-V SoC

MaixCube All-in-one K210 Development Platform

Sipeed has made several boards and kits based on Kendryte K210 RISC-V processor for low-power AI workloads such as face detection or object recognition including Maixduino board and Grove AI HAT that ship with camera and display. The company has now come up with MaixCube all-in-one development platform that houses Sipeed M1 module, a display, a camera, and a battery into a plastic case that’s somewhat similar to MStack M5StickV but with a larger display, and variations in the form factor and features. Sipeed MaixCube specifications: SoC – Kendryte K210 dual-core 64-bit RISC-V processor @ 400 MHz (overclockable to 600 MHz) with FPU, 8MB SRAM, KPU AI accelerator, APU audio processor, and FFT accelerator Storage – 128 Mbit flash, MicroSD card slot Display – 1.3″ TFT screen with 240×240 resolution Camera – OV7740 sensor (VGA camera) Audio – Built-in microphone, external speakers support; ES8374 audio codec USB – 1x USB […]

Memfault IoT and embedded debugging platform