Olimex Launches 22 Euros ESP32-GATEWAY Board with Ethernet, WiFi and Bluetooth LE

Olimex has just launched ESP32-GATEWAY board, as cost-down version of their ESP32-EVB board, still with Ethernet, WiFi, and Bleutooth LE, but without any relays, CAN bus, nor IR control, less I/Os, and a smaller footprint. Olimex ESP32-GATEWAY specifications: Wireless Module – ESP32-WROOM32 module with 802.11 b/g/n WiFi and Bluetooth LE Wired Connectivity – 10/100M Ethernet with RJ45 jack (via LAN8710A) External Storage – micro SD slot Expansion – 20-pin GPIO connector USB – 1x micro USB port for debugging (CH340T) and power Misc – Reset and user buttons Power Supply – 5V via micro USB port Dimensions – 62 x 50 mm Another change is the lack of a LiPo charger to run the board from batteries. Just like most Olimex boards, ESP32-GATEWAY is open source hardware with KiCAD design files available on Github. The software directory is still empty, but Ethernet demo code using ESP32-IDF has been pushed for […]

Design Amazon Alexa Gateways, Robots and Smart Speakers with WisCore Modular Development Kit

RAK Wireless has launched a new development board powered by Mediatek MT7628A processor running OpenWrt with built-in WiFi and Ethernet connectivity, and audio codec and microphone to support Amazon Alexa voice service. Bluetooth, Zigbee, and Z-wave will also be supported via UART modules. Wiscore Specifications: Processor – Mediatek MT7628A MIPS24KEc CPU @ up to  580MHz System Memory –  128MB DDR2 (64 MB optional) Storage – 16 MB flash + micro SD card Audio MicroSemi ZL38062 for audio in and out MicroSemi ZL38067 to handle “Alexa” keyword single or dual digital microphone up to 5 meter range Far field voice wake up Support for echo cancellation Connectivity 802.11 b/g/n WiFi 2×2 MIMO up to 300 Mbps 2x 10/100M Ethernet (LAN and WAN) Optional UART modules for Bluetooth, ZigBeem Z-Wave USB – 1x USB 2.0 host port Expansion – Arduino headers with UART, I2C, SPI and GPIOs Power Supply – 5V via […]

Marvell 88W8987xA Wireless SoC Supports 802.11ac & 802.11p WiFi, Bluetooth 5 for V2X & IVI Automotive Applications

Marvell has introduced the new 88W8987xA wireless chip with 802.11ac, 802.11p and Bluetooth 5 Connectivity for V2X (Vehicle-to-Everything) and IVI (In-Vehicle Infotainment) automotive applications such as Dedicated Short Range Communications (DSRC) systems, and secure wireless Gateway systems. Key features of Marvell 88W8987xA family: Connectivity WiFI – IEEE 802.11ac (wave2) up to 433 Mbps / IEEE 802.11p WAVE (Wireless Access in Vehicular Environments) / 1609.x Bluetooth 5 including Bluetooth Low Energy Angle of Arrival and Departure (AoA/AoD) 2x antenna configuration for Wi-Fi/Bluetooth coexistence Host Interfaces – SDIO 3.0 interface (4-bit SDIO and 1-bit SDIO) @ up to 208 MHz;  high-Speed UART interface (for Bluetooth only) Audio Interfaces – Digital audio interfaces (PCM) Temperature Range – -40°C to +105°C (AEC-Q100 Grade 2 Qualification) Package – pin 8×8 mm QFN with wettable flanks The family now includes three pin-to-pin compatible SoCs: 88W8987A with 802.11ac + Qualified Bluetooth 5 Functionality 88W8987PA with 802.11p + […]

Qualcomm Announces Audio Platforms for Smart Speakers, Headphones, and Hearables

Smart speakers are getting a lot of buzz recently with products like Amazon Echo or Google Home, and many home automation products are advertised with Amazon’s Alexa support, so that they can be controlled by voice commands. Qualcomm is now going after this market, and others audio markets via 5 new platforms for streaming audio, high resolution audio, wireless audio, USB -C audio devices – due to the “death” of the 3.5mm headphone jack -, and hearables. The five platforms include: Bluetooth and BLE Audio SoCs such as Qualcomm CSRA68100 for premium wireless speakers and headphones. The SoC comes with flash, DSP, a 2-ch audio CODEC, USB & I/Os interfaces. Qualcomm QCC3xxx entry-level Bluetooth audio SoC for mid to low-cost Bluetooth headsets and speakers. Qualcomm WHS9420 (192kHz/24-bit audio) and WHS9410 (entry-level) USB-C audio SoC for USB-C headphones Qualcomm DDFA Digital Amplifier Technology with CSRA6xxx amplifier Smart Speaker Platform shown above […]

MangOH Red Open Source Hardware Board Targets Cellular Industrial IoT Applications

Sierra Wireless has announced MangOH Red open source hardware platform designed for IIoT (Industrial IoT) applications with a snap-in socket for 2G to 4G & LTE-M/NB-IoT modules, built-in WiFi and Bluetooth, various sensors, a 26-pin expansion header, and more. MangOH Red board specifications: Snap-in socket to add any CF3-compatible modules, most of which based on Qualcomm MDM9215 ARM Cortex A5 processor including: Airprime WP7502 LTE Cat 3, HSPA, WCDMA, EDGE/GPRS module Airprime WP7504 LTE Cat 3, HSPA, WCDMA, CDMA module Airprime WP7601 LTE Cat 4 module Airprime WP7603 LTE Cat 4, WCDMA module Airprime WP8548 HSPA, WCDMA, EDGE/GPRS, and GNSS module AirPrime HL6528RD quad-band GSM/GPRS Embedded Wireless Module designed for the automotive market And more…. Storage – micro SD slot Wireless MCU Module – Wi-Fi 802.11 b/g/n and Bluetooth 4.2 BLE module with an ARM Cortex-M4 core MCU (Mediatek MT7697) providing access to real-time I/Os Wireless Connectivity “Accessories” Micro SIM card […]

Review of Wio Tracker with GPS, Bluetooth 3.0 and GSM Connectivity

Wio GPS – also called Wio Tracker – is an Arduino compatible board based on Microchip Atmel SAMD21 MCU with GPS, Bluetooth, GSM/GPRS connectivity, as well as several Grove connectors to connect sensors and modules for your IoT project. SeeedStudio sent me a sample for evaluation, so I’ve tested it, and reported my experience below by testing some of the Arduino sketches. Wio Tracker Unboxing All I got in the package was Wio GPS tracker v1.1 board. The top includes the Atmel MCU, an RGB LED, a microphone and 3.5mm AUX jack to make phone calls, a user and power button, a micro USB port for power and programming, a small 2-pin connector for a battery, and 6 Grove connectors for digital, serial, I2C and analog modules. The other side of the board comes with Quectel MC20 module that handles Bluetooth, GPS and GSM, a dual use micro SD card […]

Samsung S-Patch3 Wearable Health Tracker Based on Samsung Bio-Processor Hits the FCC

At the end of 2015, Samsung unveiled their S3FBP5A Bio-Processor comprised of an ARM Cortex-M4 MCU, a DSP, and sensors for PPG, ECG (electrocardiography), Skin temperature, BIA, and GSR to have a single package to design tracker able to monitor your health condition. The company demonstrated an early prototype called S-Patch at CES 2016 (See embedded video at the end of this post), and now S-Patch3 wearable health monitoring system has just hit the FCC. The system has two round shapes case connected via a cable, with one for the battery compartment, and the other containing the Bio Processors, and meant to be placed on your chest. The device can then synchronize the data with your smartphone in real-time over Bluetooth. People with heart conditions may benefit from the system, as if they wish to do so, they could share the data with their doctor. Few documents are publicly available […]

Nordic Thingy:52 Bluetooth 5 IoT Sensor Development Kit Targets Mobile & Web App Developers

Some developers may be interested in providing solutions for the Internet of Things, but they may not have the skills or interest in making their own hardware, and/or develop firmware, and just want to create demos or prototypes quickly, focusing on app development instead. Nordic Semiconductors has recently launched Thingy:52 IoT Sensor Kit with Bluetooth 5 & NFC connectivity, and various sensors for those developers. Nordic:52 IoT Sensor development kit (nRF6936) hardware specifications: MCU – Nordic Semi nRF52832 ARM Cortex-M4F Bluetooth 5 System on Chip (SoC) Connectivity – Bluetooth 5 LE and NFC Sensors Temperature,Humidity, Air pressure, Air quality (CO2 and TVOC), color and light intensity 9-axis motion sensing – Tap detection, orientation, step counter, quaternions, euler angles, rotation matrix, gravity vector, compass heading, raw  accelerometer, gyroscope, and compass data Audio Speaker for playing prestored samples, tones, or sound streamed over BLE (8-bit 8 kHz LoFi) Microphone streaming (ADPCM compressed […]

EDATEC Raspberry Pi 5 fanless case