Arrow Embedded To Go Free Online Conference, and 3,000 Development Boards Giveaway

Arrow Embedded to Go

With the coronavirus outbreak on-going, many events are either canceled or moving online. Arrow Electronics has now announced what appears to be a completely new online event. Embedded To Go virtual technology exhibition for embedded systems will take place on April 1-3, 2020, and offer technical presentations, information on newly launched technology, and access to Arrow’s sales and engineering teams. The event will entirely free to attend, and you can register online today with a company’s email address. The event will start in about 10 days by so far the virtual “booth map”, “supplier guide” and “lecture area” are inaccessible. We only know what the event should consist of thanks to an article on EENew Embedded: Technical presentation webinars will be hosted by leading suppliers covering AI, IoT and Edge computing, precision measurement, high-performance computing, intelligent condition-based monitoring, and other technological subjects. Information will also be available in the form of videos and white papers on boards and applications. A …

Support CNX Software – Donate via PayPal or become a Patron on Patreon

Register to the Embedded Online Conference for Free Before February 29th

Embedded Online Conference

Events such as the Embedded Linux Conference and Embedded Systems Conference take place in the US and Europe every year. There are plenty of talks and it’s certainly good for networking, but you need to travel to the event and the entrance fee to have access to all session costs several hundred dollars if you book early, and over one thousand dollars if you register close to the date of the event. Most ELC/ELCE videos usually end up on The Linux Foundation YouTube channel, but the Beningo Embedded Group and Embedded Related website decided to organize a similar conference happening online and simply called the “Embedded Online Conference“. The conference offers topics about embedded systems, DSP, machine learning and FPGA and will take place on May 20.  There are currently 17 talks, but they are still calling for talks so more sessions may be added before the actual event. You’ll also be able to ask questions to the speakers. Some …

Support CNX Software – Donate via PayPal or become a Patron on Patreon

Embedded Linux Conference & Open Source Summit Europe 2017 Schedule

The Embedded Linux Conference & IoT summit 2017 took place in the US earlier this year in February, but there will soon be a similar event with the Embedded Linux Conference *& Open Source Summit Europe 2017 to take up in Europe on October 23 – 25 in Prague, Czech Republic, and the Linux Foundation has just published the schedule. It’s always useful to find out what is being discussed during such events, even if you are not going to attend, so I went through the different sessions, and compose my own virtual schedule with some of the ones I find the most interesting. Monday, October 23 11:15 – 11:55 – An Introduction to SPI-NOR Subsystem – Vignesh Raghavendra, Texas Instruments India Modern day embedded systems have dedicated SPI controllers to support NOR flashes. They have many hardware level features to increase the ease and efficiency of accessing SPI NOR flashes and also support different SPI bus widths and speeds. …

Support CNX Software – Donate via PayPal or become a Patron on Patreon

Embedded Systems Conference 2017 Schedule – May 3-4

The Embedded Systems Conference 2017 will take place over two days in Boston, US on May 3-4, and the organizers have published the schedule of the event. Even if you’re not going to attend, you’ll often learn something or find new information by just checking out the talks and abstracts, so I’ve created my own virtual schedule with some of the most interesting sessions. Wednesday, May 3rd 08:00 – 08:45 – Combining OpenCV and High Level Synthesis to Accelerate your FPGA / SoC EV Application by Adam Taylor, Adiuvo Engineering & Training Ltd This session will demonstrate how you can combine commonly used Open source frameworks such as OpenCV with High Level Synthesis to generate a embedded vision system using FPGA / SoC. The combination of OpenCV and HLS allows for a much faster algorithm development time and consequently a faster time to market for the end application. 09:00 – 09:45 – Understanding the ARM Processor Roadmap by Bob Boys,   Product …

Support CNX Software – Donate via PayPal or become a Patron on Patreon

Linux.conf.au Linux Conference Australia Videos Uploaded to YouTube

Linux.conf.au is a Linux conference that takes place yearly in Australia or New Zealand. This year, the event took place on January 16-20 in  Hobart in Tasmania, and the schedule was divided into 6 categories/rooms: Sysadmin, WOOTConf, Open Knowledge, Kernel, Games and FOSS, and Open Radio. There was not that many talks related to embedded or dev boards, but some notable sessions included “Building Escape Room Horror Experiences with Arduino and C++“, “Decoding Satellites with SatNOGS“, or “My adventures building hamlib support for the OpenSDR board” among others. The organizers have now uploaded videos of the talks in Youtube with one session embedded below. Via Phoronix Jean-Luc Aufranc (CNXSoft)Jean-Luc started CNX Software in 2010 as a part-time endeavor, before quitting his job as a software engineering manager, and starting to write daily news, and reviews full time later in 2011. www.cnx-software.com Support CNX Software – Donate via PayPal or become a Patron on Patreon

Support CNX Software – Donate via PayPal or become a Patron on Patreon

Fujitsu Launches F-Cue 96Boards Compliant Board Powered by SocioNext MB86S71 Processor

While 96Boards platforms may not be selling like Raspberry Pi boards, the form factor is quite popular with vendors, as there are now around 10 development board either directly supported by 96Boards, or at least compliant for the form factor. Fujitsu has also made their own 96Boards compliant F-Cue board powered by SocioNext MB86S71 quad core Cortex A15/A7 processor, as well as F-Cue extension board with Ethernet & PCIe interfaces. F-Cue board specifications: SoC – Socionext MB86S71 big.LITTLE quad core processor with 2x Cortex-A15 cores @ 1.2GHz, 2x Cortex-A7 cores @ 800MHz, and Mali-T624 GPU System Memory – 2GB LPDDR3 1333MHz Storage – 16GB eMMC 4.51 flash, micro SD 3.0 UHS-I slot Video & Audio Output – HDMI 1.4b Multimedia Capabilities – [email protected] encode/decode, 4 stream H.264 decode; 32k x 32k JPEG codec Connectivity – 802.11 a/b/g/n/ac WiFi , Bluetooth 4.2 USB –  1x USB 3.0 host port, 1x USB 2.0 host port, 1x Micro-USB 2.0 device port Expansion Headers …

Support CNX Software – Donate via PayPal or become a Patron on Patreon

Embedded Linux Conference 2016 and OpenIoT Summit 2016 Schedule

The Embedded Linux Conference 2016 and the OpenIoT summit 2016 will take place on April 4 – 6, 2016 in San Diego, California, and over 800 attended will meet including kernel & system developers, userspace developers, and product vendors. The Linux Foundation has recently published the schedule, so I’ve had a look at some of the talks, and designed my own virtual schedule to find out more the current development focus although I won’t attend. Monday April 4 10:40am – 11:30am – Linux Connectivity for IoT by Marcel Holtmann, Intel OTC There are many connectivity solutions that available for IoT. For example Bluetooth Low Energy, 802.15.4, Zigbee, OIC, Thread and others. This presentation will provide and overview of the existing technology and upcoming standard and how they tie into the Linux kernel and its ecosystem. 11:40 – 12:30 – BoF: kernelci.org: A Million Kernel Boots and Counting by Kevin Hilman, BayLibre The kernelci.org project is currently over 1500 kernel boot …

Support CNX Software – Donate via PayPal or become a Patron on Patreon

Embedded Systems Conference 2016 Schedule – April 13-14

The Embedded Systems Conference 2016 will take place in Boston on April 13-14, and the organizers have now released the schedule, minus some keynotes, which features four main tracks: Embedded Hardware, Embedded Software, Connected Devices and the Internet of Things (IoT), and the ESC Engineering Theatre. As usual, I’ve gone through the list of talks and composed my own little virtual schedule which ended up with sessions focusing on power management, IoT, and security, as well some optimization and drivers development talks among others, such as patents, and the origin of Gerber files. Wednesday 13 8:00 – 9:00 – Power Management in Embedded Systems by Colin Walls, Embedded Software Technologist, Mentor Graphics The importance of power management in today’s embedded designs has been steadily growing as an increasing number of battery powered devices are developed. In this session, we will discuss design considerations that should be made when starting a new power sensitive embedded design, which include: Choosing the hardware …

Support CNX Software – Donate via PayPal or become a Patron on Patreon