giveaway News - Page 6 of 14 - CNX Software

November 7, 2019November 11, 2019 by Jean-Luc Aufranc (CNXSoft) - 145 Comments

Giveaway Week – Maixduino Sipeed M1 RISC-V AI Kit

For the fourth day of Giveaway Week, I’ll give out a kit comprised of Maixduino a RISC-V development board with an AI accelerator in Arduino form factor, a camera, and a 2.4″ color LCD. I tested the Maixduino kit with MicroPython, but it can also be programmed with the Arduino IDE, or Kendryte SDK. It basically allows you to run low-power AI workloads at the edge, i.e. without access to the cloud, such as face detection. To enter the draw simply leave a comment below. Other rules are as follows: Only one entry per contest. I will filter out entries with the same IP and/or email address. Contests are open for 48 hours starting at 10 am (Bangkok time) every day. Comments will be closed after 48 hours. If comments are open, the contest is still going on. Winners will be selected with random.org and announced in the comments section […]

November 6, 2019November 8, 2019 by Jean-Luc Aufranc (CNXSoft) - 191 Comments

Giveaway Week – MINIX NEO S1 USB-C Hub with 120GB built-in SSD

MINIX NEO S1 & S2 USB-C hubs come with either 120 or 240 GB SSD storage, as well as an HDMI output, 2x USB 3.0 ports, and a USB-C port for power. I reviewed MINIX NEO S2 in details with an SBC running Ubuntu 18.04, and plan to keep it for future reviews, but since I also received MINIX NEO S1, I’ll be given it away for free to one of my readers as part of Giveaway Week 2019. While the device is designed for Apple Macbook Air and Apple Macbook Pro, it should work with any computer or board with a USB-C port with DisplayPort Alternate mode provided you want to use the HDMI output port. An extra USB-C power supply is optional, but I’ve found out it’s mostly required if you’ve going to connect one or more USB 3.0 hard drive to the hub. This item is new, […]

November 5, 2019November 7, 2019 by Jean-Luc Aufranc (CNXSoft) - 82 Comments

Giveaway Week – WisCellular NB-IoT & eMTC GPS Tracker

Rak Wireless WisCellular is an NB-IoT & eMTC Arduino shield based on Quectel BG96 module with 2G fallback that is similar to the company’s previous-generation WisLTE board, except it is certified for the global markets. I received a beta sample last year and went through the instructions to use it with a Hologram SIM card, but sadly I never managed to make it work, and eventually learned the Hologram SIM card did not support NB-IoT in Thailand. So I would have had to buy a local SIM card, but at the time, they didn’t sell those, and the only way to get an NB-IoT SIM card was to buy a development kit. Before going ahead with the purchase, I asked about coverage in my area but never managed to get a definitive answer so I gave up. So instead of keeping it in a drawer at home, I’d better just […]

November 4, 2019November 6, 2019 by Jean-Luc Aufranc (CNXSoft) - 149 Comments

Giveaway Week – Balena Fin Developer Kit

balenaFin, RPi Compute Module, Power Supply, Enclosure

We’ve been organizing “giveaway weeks” every year since 2014 on CNX Software to send some of the review samples to our readers. Let’s do it again in 2019 starting with Balena Fin developer kit based on Raspberry Pi 3+ Computer Module (CM3+) with 8GB flash and a carrier board in order to get started with BalenaOS operating system and the company’s balenaCloud service. Instead of a traditional review, we wrote a getting started guide for balenaFin Developer Kit, balenaOS and balenaCloud, where we explain how to flash the OS to the board, configure it, run a container, and manage the device, including container updates, from Balenacloud. The winner will receive the full kit below with carrier board, Raspberry Pi CM3+ module, CR1225 battery, enclosure, power supply, and MicroUSB cable. It will come already assembled as shown in the first photo. To enter the draw simply leave a comment below. Other […]

November 14, 2018 by Jean-Luc Aufranc (CNXSoft) - 8 Comments

Giveaway Week Winners – November 2018

We just had a week of fun on CNX Software with our yearly “Giveaway Week” activity where 7 prizes – from development boards to Raspberry Pi add-on boards or solar chargers – were randomly given away to people who entered by leaving a comment. The winners are in, with Asia starting strong, but Europe quickly taking the lead, and the US ending up the giveaway with a great (again) finish. Here’s the full list of winners: Videostrong VS-RD-RK3399 development board – Việt trần, VIETNAM CHOETECH Solar Charger – Erki, ESTONIA ESP32-LyraTD-MSC audio mic HDK – Ron, The Netherlands ROC-RK3328-CC development board – Dainis, LATVIA (a second time winner having previously won during Giveaway Week 2016) ThaiEasyElec 3G GPS Raspberry Pi Hat – zmlopez, SPAIN ANAVI Infrared and RGB strip pHAT – Joe, USA NanoPC-T4 development board – Jeffrey, USA I’ve just send all 7 packages earlier this afternoon. Hopefully, the […]

November 11, 2018November 13, 2018 by Jean-Luc Aufranc (CNXSoft) - 406 Comments

Giveaway Week – NanoPC-T4 RK3399 SBC

We started the week-end with a Rockchip RK3399 board, so it makes perfect sense to end giveaway week with a bang, and another RK3399 SBC: FriendlyElec NanoPC-T4. Like other such boards, NanoPC-T4 supports both Linux and Android, but since I had tested various RK3399 SBCs with Linux, instead I decided to review NanoPC-T4 with Android 7.1, and it performed mostly has expected although I found out a larger heatsink would be necessary for more consistent performance. FriendyElec normally provides good documentation and decent firmware images for their boards so that definitely a plus. The winner of the kit will receive half of what is shown in the photo above, as I received two kits with the board, a heatsink and screws, a remote control, a 12V power supply, and an acrylic case. To enter the draw simply leave a comment below. Other rules are as follows: Only one entry per […]

November 10, 2018November 12, 2018 by Jean-Luc Aufranc (CNXSoft) - 53 Comments

Giveaway Week – ANAVI Infrared pHat + Light pHat Starter Kit

Leon ANAVI works as a software engineer, but designs some open source hardware boards as a hobby, and usually sends me his creations for review. That means I have a bunch of his products, and today I’ll be giving away ANAVI Light pHat Starter Kit, and ANAVI Infrared pHat. The light sensor in the kit above will not be included, since I have no idea where it is… The winner still get the board and RGB LED string, and a few stickers. After connecting to a Raspberry Pi board and adding a 12V power supply, you’ll be able to control the LED as I did in “Getting Started with ANAVI Light pHat Starter Kit with RGB LED Strip, Light Sensor“. ANAVI Infrared pHat will also be part of the winning package, and you may consider reading the instructions showing how to control an air conditioner with a Raspberry Pi board. […]

November 9, 2018November 11, 2018 by Jean-Luc Aufranc (CNXSoft) - 76 Comments

Giveaway Week – ThaiEasyElec 3G Raspberry Pi HAT

3G-GPS-Tracker-Raspberry-Pi-Board-Configuration

You’ll need a 40-pin Raspberry Pi board for this giveaway. Quectel UC20 based ThaiEasyElec 3G Raspberry Pi HAT adds 3G / 2G connectivity to the popular development board. I”l send the board with the full kit include GPS/GLONASS antenna, cellular antenna, headers and spacers. I explained how to use the board in “How to Use 3G and GPS on Raspberry Pi” post, and I found that it was pretty easy working with GPS and 3G using Hologram SIM card by following the instructions provided by ThaiEasyElec. I could also find alternative connection method for this type of board on the Internet. To enter the draw simply leave a comment below. Other rules are as follows: Only one entry per contest. I will filter out entries with the same IP and/or email address. Contests are open for 48 hours starting at 10am (Bangkok time) every day. Comments will be closed after […]