PHYTEC phyCORE-AM65x SoM Features TI Sitara AM654x Processor

phyCore-AM654x SoM

We already knew Texas Instruments was working on AM654 processor, the first 64-bit Arm SoC from the company, featuring four Cortex A53 cores, a PowerVR SGX544 GPU, dual lock-step capable Cortex R5F cores, and interfaces targeting industrial applications. Now at least one company has announced a system-on-module based on the solution. PHYTEC phyCORE-AM65x is equipped with AM654x processor,  DDR4 and ECC DDR4 memory, up to 32GB eMMC flash, as well as built-in Ethernet, WiFi, and Bluetooth connectivity.  phyCORE-AM65x specifications: SoC – Texas Instruments Sitara AM65x with 4x Arm Cortex-A53 cores, dual-core Arm Cortex-R5F MCU subsystem, PowerVR SGX544 GPU, 6x PRU-ICSSG System Memory – DDR4 with support for discrete DDR4 ECC Storage – Up to 32GB eMMC Connectivity Optional 2.4 or 5GHz Certified WiFi Solution 10/100/1000 Mbit/s Ethernet PHY on SOM Board-to-board connectors – 2x “high-density PCB interconnects” Dimensions – 65 x 55 mm The company provides Linux (Yocto Project), Android, and TI-RTOS BSP’s for the SoM. phyCORE-AM654x Rapid Development Kit …

Support CNX Software – Donate via PayPal or become a Patron on Patreon

PHYTEC Introduces phyCORE SoMs & Devkits Based on NXP i.MX8, i.MX 8M, or i.MX 8X Processors

PHYTEC, an embedded systems company headquartered in Germany with global offices, has updated their phyCORE systems-on-module family with 3 sub-families of modules based on NXP i.MX 8, i.MX 8X, or i.MX 8M dual or quad core processors for a total of 9 modules. phyCORE-i.MX 8 Specifications: SoC – NXP i.MX 8Quad,  i.MX 8QuadPlus or  i.MX 8QuadMax Arm Cortex-A72/A53/M4F processor @ up to 1.6 GHz with  Tensilica HiFi 4 DSP @ 666 MHz, 2x Vivante GC7000XSVX GPUs System Memory – 1  to 8GB LPDDR4 RAM Storage – 64MB to 256MB Octal SPI/DualSPI SPI NOR Flash, 4 GB to 128 GB eMMC flash, 4kB EEPROM Connectivity – 2x Gigabit Ethernet PHY 4x 120-pin Board-to-board connectors with: Display – 2x LVDS, 2x MIPI DSI, 1x HDMI Video Input / Camera – 1x HDMI, 2x MIPI CSI Audio – 2x ESAI, up to 4x SAI Networking – 2x 10/100/1000 Mbit/s Ethernet USB – 1x USB OTG,  1x USB 3.0 Serial – 1x UART, 2x …

Support CNX Software – Donate via PayPal or become a Patron on Patreon

Linux 4.12 Release – Main Changes, ARM & MIPS Architectures

Linus Torvalds has just released Linux 4.12: Things were quite calm this week, so I really didn’t have any real reason to delay the 4.12 release. As mentioned over the various rc announcements, 4.12 is one of the bigger releases historically, and I think only 4.9 ends up having had more commits. And 4.9 was big at least partly because Greg announced it was an LTS kernel. But 4.12 is just plain big. There’s also nothing particularly odd going on in the tree – it’s all just normal development, just more of it that usual. The shortlog below is obviously just the minor changes since rc7 – the whole 4.12 shortlog is much too large to post. In the diff department, 4.12 is also very big, although the reason there isn’t just that there’s a lot of development, we have the added bulk of a lot of new  header files for the AMD Vega support. That’s almost exactly half the …

Support CNX Software – Donate via PayPal or become a Patron on Patreon

Phytec phyBOARD WEGA Industrial Pico-ITX SBC Features Texas Instruments Sitara AM335x SoCs

Phytec has recently announced phyBOARD WEGA board powered by Texas Instruments AM335x Sitara ARM Processors via their phyCORE-AM335x SoM, which comes with up to 1GB DDR3 SDRAM, and up to 2GB NAND Flash. This single board computer targets industrial HMI (Human Machine Interface) and is suitable for various automation and display applications. PhyBOARD WEGA specifications: SoM – phyCORE-AM335x with: SoC – Texas Instruments Sitara AM355x ARM Cortex-A8 processor @ up to 1GHz, with PowerVR SGX530 GPU System Memory – 256 MB DDR3 RAM (Max: 1GB) Storage – 128 MB NAND Flash (Max: 2GB), optional 8 MB NOR Flash, 4KB EEPROM External Storage – micro SD card slot Connectivity – 2 x 10/100 Ethernet USB – 1 x USB Host, 1 x USB OTG Display I/F – 24bpp TTL Communication Interfaces – 6 x UART, 3 x I2C, 2 x SPI, 1 x CAN Expansion Connectors – 1x ADC(12Bit, 8Channel), GPIOs, JTAG, HDMI Power – 5V DC Dimensions – 100 x …

Support CNX Software – Donate via PayPal or become a Patron on Patreon

$55 Phytec Cosmic Boards Feature Freescale Vybrid SoCs

Freescale Vybrid SoC family has been announced at the beginning of last year, with the low-end VF3xx and mid-end VF4xx featuring a single Cortex A5 CPU, and the higher-end VF6xx and VF7xx providing a multi-core processor with Cortex A5 and Cortex M4 cores, for respectively performance, and real-time/low power tasks. Phytec has just announced the Cosmic board featuring Freescale Vybrid VF6xx single core Cortex A5 processor, and Cosmic+ board with Vybrid VF6xx Cortex A5 + Cortex M4 processor. Both boards are comprised of a baseboard coupled with a Phytec phyCORE-Vybrid system-on-module (SoM), and can be used for Linux and MQX (Freescale RTOS) development. Cosmic / Cosmic+ boards specifications: Processor VF5xx ARM Cortex-A5 @ 500MHz (Cosmic) VF6xx ARM Cortex-A5 @ 500MHz + ARM Cortex-M4 @ 167 MHz (Cosmic+) System Memory – 512 MB DDR3 Storage – 512 MB NAND + micro SD slot USB – HS USB OTG / HS USB Host Connectivity – 10/100M Ethernet Video Output – Micro HDMI …

Support CNX Software – Donate via PayPal or become a Patron on Patreon

Phytec India Unveils “Open Board-AM335x” Development Kit

PHYTEC has launched the Open Board-AM335x development kit in order to support Linux and Android development on Texas Instruments AM335x Sitara ARM Processors in India. The Open Board-AM335x is comprised of a baseboard and phyCORE-AM335x SoM, and comes with 512 MB DDR3 SDRAM, 512 MB NAND Flash, and optionally, 8 MB SPI Flash. The baseboard is open source hardware as schematics and Gerber/BOM are freely available. Here are the key features of Phytec Open Board-AM335x: SoM – PhyCore-AM335x with ARM Cortex-A8 processors @ 720 MHz (AM3352, AM3354, AM3356, AM3357, AM3358 and AM3359) System Memory – 512 MB DDR3 RAM Storage – 512 MB NAND + SD Card slot + 8 MB SPI NOR Flash (Optional) + 32 KB EEPROM (Optional) Serial – 1x UART (RS232) + 4x UART (TTL) USB – 1x USB Host + 1x USB OTG Connectivity – 1x 10/100/1G Ethernet Audio –  WM8974 Codec Display Interfaces – 24 bpp TTL / LVDS / VGA + Touchscreen I/F Misc – 4 …

Support CNX Software – Donate via PayPal or become a Patron on Patreon

Texas Instruments OMAP 5 Cortex A15 Systems-on-Module Galore

Today Texas Instruments published a press release to announce partners 6 company had worked to design and manufactures systems-on-module based on the dual core Cortex A15 OMAP 5 SoC and that those would be on display at Electronica Trade Faire this week (13-16 October) in Munich. Embedded++ EPP-Pico-OMAP5430 This solution is actually a Pico-ITX board based on OMAP5430 with 2 GB LP-DDR2, USB 3.0 SuperSpeed connectivity (1x USB 3.0, 3x USB 2.0),  up to 16 GB eMMC storage, a SATA port, a 100Mb Ethernet port , UART, RS-323 & SPI ports, GPIOs, DVI and LVDS outputs, a serial camera input port, a micro SD card socket, Murata WiLink 8.0 connectivity solution (Wi-Fi, GNSS, Bluetooth®, Bluetooth v4.0 and FM technologies) and a built-in battery charger (1-cell Li-Ion). The company provides Linux and Android 4.1 BSP. Check the product page for a few more details. GreenBase GK-5432 GK-5432 is a computer on module based on TI OMAP 5432 SoC following the new …

Support CNX Software – Donate via PayPal or become a Patron on Patreon

Phytec phyCORE-AM335x System on Module (SOM) Based on TI Sitara AM335x

PHYTEC announced the phyCORE-AM335x System on Module (SOM) powered by Texas Instruments Sitara AM335x Cortex-A8 processor clocked at 720Mhz and PowerVR SGX530 GPU. This SoM targets industrial applications and supports standards such as EtherCAT, Ethernet/IP, PROFINET, PROFIBUS, POWERLINK, SERCOS-III and CANopen. Here are phyCORE-AM335x SOM specifications: TI’s Sitara AM335x ARM Cortex-A8 processors @ 720 MHz (AM3352, AM3354, AM3356, AM3357, AM3358 and AM3359) PowerVR SGX530 Graphics (AM3359, AM3358, AM3354 only) 512 MB DDR3, 512MB/1GB NAND, 8 MB SPI Flash, 32 KB EEPROM 6x  UARTs, 3x I2C, 2x McASP, 2x SPI, 2x CAN 2x USB OTG 2x 10/100/1G Ethernet (Gigabit PHY on carrier board) 24 bpp TTL or LVDS 44 x 50 mm form factor -40 degrees to +85 degrees C temperature range Linux, Compact 7, Android The phyCORE-AM335x SOM will be available in a PHYTEC Rapid Development Kit (RDK) including: phyCore-AM335x SOM A carrier board Board support packages (BSP) Demo images Documentation Linux and Windows Compact 7 BSPs will be available …

Support CNX Software – Donate via PayPal or become a Patron on Patreon