QNAP Launches TS-128A & TS-228A Entry-Level NAS Powered by Realtek RTD1295 SoC

Realtek RTD1295 can be found in mid range to high-end 4K TV boxes that often include a SATA bay or interface, as well as an HDMI input port that supports PVR, PiP, and UDP broadcasting, with the devices normally running both Android and OpenWrt simultaneously respectively for multimedia apps, and storage/network functions. But last year, we also spotted QNAP & Synology working on entry-level NAS based on the processor, and the former has now launched the TS-x28A series with two models: TS-128A & TS-228A equipped with respectively one and two 3.5″ SATA bays. QNAP TS-128A & TS-228A specifications: SoC – Realtek RTD1295 quad-core Arm Cortex A53 processor @ up to 1.4GHz with hardware encryption acceleration engine System Memory – 1GB DDR4 (soldered) Storage 4GB eMMC flash for firmware Drive Bay TS-128A – 1x 3.5″ SATA 6Gbps TS-228A – 2x 3.5″ SATA 6Gbps Connectivity – Gigabit Ethernet Port (RJ45) USB – 1x USB 3.1 Gen1 port ; 2x USB 2.0 port …

Support CNX Software – Donate via PayPal or become a Patron on Patreon

QNAP QBoat Sunny Review – Part 1: Unboxing, Closer Look, and Initial Setup

We spotted the QBoat Sunny at QNAP’s booth back at CES in January and much has changed since then. Not only did QNAP change from an Intel based solution to an ARM based one, but the product seems to have shifted from being a development board to a strange kind of IoT server. The QBoat Sunny sample that QNAP provided for us to look at is based on the Annapurna Labs AL-314 quad core ARM Cortex-A15 SoC which is clocked at 1.7GHz. This has been paired with 2GB of DDR3L RAM (non-expandable) and 512MB of NAND flash that isn’t user accessible, much as on their NAS products. This simply contains the core parts of the QTS Lite OS. As such, you need to install an M.2 SATA SSD to be able to get started with the QBoat Sunny. QNAP provides a list of compatible SSDs on its website, although some are not “consumer” models and might not be available for …

Support CNX Software – Donate via PayPal or become a Patron on Patreon

QNAP TAS-168 and TAS-268 are NAS Running Android and Linux based QTS on Realtek RTD1195 Processor

QNAP has recently launched two network attached storage (NAS) devices with TAS-168 and TAS-268 that are based on Realtek RTD1195 dual core processor, and happen to run Android along side the company’s Linux based QTS operating system, and respectively have one and two bays for 2.5″ or 3.5″ hard drives. QNAP TAS-168 and TAS-268 specifications: SoC – Realtek RTD1195 dual core ARM Cortex A7 processor @ 1.1 GHz with Mali-400MP2 GPU System Memory – 2 GB DDR3 Storage 4 GB eMMC and SD card slot TAS-168 – 1x 2.5″ or 3.5″ SATA @ 3Gbs TAS-268 – 2x 2.5″ or 3.5″ SATA @ 3Gbs Video and Audio Output – HDMI port Connectivity – Gigabit Ethernet USB – 1x USB 3.0, 4x USB 2.0 host ports Misc – IR receiver, LEDs for HDD, LAN, status, and USB, buttons (Power, reset, USB copy) Power – TAS-168 – 12V/3A (36W) power adapter; TAS-268 – 12V/5A (60W) power adapter Power consumption TAS-168 – HDD sleep mode: …

Support CNX Software – Donate via PayPal or become a Patron on Patreon