$25 GL.iNet 6416A is an Hackable OpenWRT Router with Easy UART and GPIO Access

There are plenty of low cost routers supporting OpenWRT, but GL.iNet 6416A has several advantages compared to devices like TP-Link WR703N. Both are based on Atheros AR9931, but GL.iNet router has more memory and storage (64MB RAM + 16MB Flash vs 32MB RAM + 4MB Flash), two Ethernet ports instead of just one, and 6 GPIOs, the serial pins, and power signals (5V, 3.3V and GND) are all easily accessible via though holes or headers. Gl.iNet 6416A can be purchased for about $25 on DealExtreme or Amazon US, and it used to be listed on eBay, but is now out of stock. Gl/iNET 6416A specifications: Wi-Fi SoC – Atheros AR9331 MIPS processor @ 400 MHz System Memory – 64MB RAM Storage – 16MB Flash Connectivity – 2x 10/100 Mbit Ethernet ports, 802.11 b/g/n Wi-FI up to 150Mbps USB – 1x USB 2.0 port, 1x micro USB port for power Debugging – Serial console via UART header (GND, Tx, Rx) Expansion …

Support CNX Software – Donate via PayPal or become a Patron on Patreon

How to Use an Android TV Box as a Wi-Fi Access Point

Today, I’ve come across another potential use case for Android TV boxes with Wi-Fi and Ethernet. Let’s say you are in a room with Ethernet, but there’s no Wi-Fi signal or the signal is too weak, and want to use your smartphone to connect to the Internet via Wi-Fi. If you don’t have one of these small (openWRT) Wi-Fi router with you, but instead brought an Android mini PC, you can configure the “Portable Hotspot” function to transform it into a secure Wi-Fi access point. Assuming you’ve connect an Ethernet cable, and powered the device, first make sure Ethernet is enabled\, and Wi-Fi is disabled in the Settings menu. To click on Settings->More.. in the Wireless & Networks section, and select “Tethering & portable hotspot” or simply “Portable hotspot” depending on your firmware. In the next menu, click on Portable Wi-Fi hotspot to enabled it, then “Set up Wi-Fi Hospot” to optionally change the Network SSID and Security protocol, and …

Support CNX Software – Donate via PayPal or become a Patron on Patreon

Soap is a Touchscreen Enabled Router Supporting Gigabit Ethernet and Lots of Wireless Standards (Crowdfunding)

Soap is a strange creature, and I’m not convinced there are that many use cases for such hardware, but I find it interesting that the developers decided to pack a Freescale i.MX6 Solo/Dual or Quad SoC powered Android 4.4 tablet and a router supporting five Gigabit Etherner ports, as well as WiFI 802.11ac, Wi-0Fi 802.11 b/g/n,  Zigbee, Z-wave, Bluetooth 4.0 (BLE), Insteon RF, X10, 433Mhz, NFC, and infrared into one and only device which they call an “Intelligent Home Management Hub”.  It’s also complete with an HDMI output port so that you can use it as a media player. Let’s go through the specifications for the four version this little monster (Soap Solo, Soap Dual, Soap Quad, and Soap 8.4): SoC Soap Solo – Freescale i.MX6 Solo single ARM Cortex A9 @ 1 GHz with Vivante GC880 3D GPU Soap Dual – Freescale i.MX6 Dual dual ARM Cortex A9 @ 1 GHz with Vivante GC2000 3D GPU Soap Quad and …

Support CNX Software – Donate via PayPal or become a Patron on Patreon

802.11ah Wi-Fi (900 MHz) to Provide Low Power, Long Range Connectivity for the Internet of Things

Most devices now feature Wi-Fi modules capable of handling 802.11 b/g/n at 2.4 Ghz (and 5 GHz for dual band Wi-Fi), and newer devices and routers boast 802.11ac connectivity @ 5GHz with increased bandwidth (up to 1.2 Gbit/s in theory, maybe around 400 Mbit/s in practive), and in some case increased range with  beam-forming. But thanks to an article on EETimes, I’ve learned there’s another upcoming Wi-Fi standard called 802.11ah operating in the 900MHz range, with data rates from 150 Kbit/s with a 1 MHz band to as much as 40 Mbit/s over an 8 MHz band, lower power consumption, and a least double of the range of a typical 802.11n device,capable of covering an area of about 1 km2. The target applications are sensors networks, backhaul networks for sensor and meter, and extended range Wi-Fi, as the standard allows long range and more clients at low bitrates. This new Wi-Fi standard will compete with other sub 1GHz wireless standard …

Support CNX Software – Donate via PayPal or become a Patron on Patreon

Xiaomi MiWiFi 802.11ac NAS Powered by Broadcom BCM4709 SoC

Last month, Xiaomi teased the public with pictures of a new device, but gave very few details. The company have now provided further details, and the box shown below turns out to be an 802.11 NAS (Network Access Storage) powered by Broadcom BCM4709 dual core Cortex A9 Wi-Fi 802.11ac SoC. Xiaomi provided the following technical specifications for MiWiFi NAS: SoC – Broadcom BCM4709 dual-core Cortex A9 processor @ 1 GHz System Memory – 256MB DDR3 Storage – SATA interface with 1TB Hard drive Connectivity 2x Gigabit Ethernet RJ45 ports Dual band WiFi 802.11ac (2.4/5GHz) NFC (at the top of the device) USB – 1x USB 2.0 host port Misc – Fan for cooling The company will launch a sale for Beta units on the 19th of December, for the Chinese market only, and the NAS will come disassembled in a wooden case with a TB harddrive, a power supply, cables, and the tools to put all pieces together. It will …

Support CNX Software – Donate via PayPal or become a Patron on Patreon

Linux.Darlloz Worm Targets Embedded Linux Devices

Symantec has recently discovered a new Linux worm, called Linux.Darlloz, that targets Internet-enabled devices running Linux in addition to traditional computers. That means devices such as home routers, set-top boxes and security cameras could be at risk of infection, although no attacks against non-PC devices have been confirmed yet. The worm exploits an “old” PHP vulnerability, which was patched in May 2012 (PHP 5.4.3, and PHP 5.3.13), and currently only affects Intel (x86) based systems. So you’d need an embedded system powered by an Intel processor, running Linux and PHP to be at risk. Having said that, Symantec also explains code for other architectures such as ARM, PPC, and MIPS, is also present in the worm, and these systems could potentially be at risk too with small modifications. Here’s how the worm operates: Upon execution, the worm generates IP addresses randomly, accesses a specific path on the machine with well-known ID and passwords, and sends HTTP POST requests, which exploit …

Support CNX Software – Donate via PayPal or become a Patron on Patreon

$27 TP-LINK TL-MR10U is an Hackable OpenWRT Wi-Fi Router with a Power Bank

TP-Link WR703N is a cheap 802.11 b/g/n router (you can now get it for about $20) that can easily be hacked to run openWRT and for example, act as an home automation gateway, printer server and more.  But if you need a battery powered router for your application, TP-Link TL-MR10U,  based on similar hardware as TL-703WR, should be a better match as it comes with a 2600 mAh battery, and costs just about $27 on DealExtreme. Here are the specifications of the device: CPU – Atheros AR9331 CPU @ 400Mhz System Memory – 32MB RAM Storage – 4 MB Flash Connectivity: 10/100 Mbit Ethernet port 802.11 b/g/n 150Mbps 3G support via external USB dongle USB – USB 2.0 port + micro-USB port for power Misc – Serial port access Dimensions – 91mm x 43mm x 25.85mm(L x W x H) The device comes with a microUSB cable and a user’s manual in English and Chinese. Instructions to install openWRT, perform …

Support CNX Software – Donate via PayPal or become a Patron on Patreon

$14 Marstek MPR-N9 WiFi/3G Router with 2,400 mAh Battery

One of my readers (Onebir) brought Poray M3 mini Router to my attention a few days ago, as it just cost $17 at the time (now over $20) and OpenWRT developer Squonk seems very interested about it since it features microSD and SD card slots missing in TL-WR703N. However, the device only has 16 MB memory which makes it somewhat difficult to run OpenWRT, or at least some of its features. But today, I’m not going to talk about this. Mentions of Poray M3 router came in HAME MPR-A1 OpenWRT forum thread, and I discovered a new (to me) type of low cost, small form factor device: portable Wi-Fi/3G routers. Those devices are about the size of android mini-PC and contain the chips to handle Wi-Fi, USB host (for external 3G dongle), and comes with a built-in battery so that you can use them anywhere (beach, mountain, car…), as long as there is 3G coverage. You can also use them …

Support CNX Software – Donate via PayPal or become a Patron on Patreon