smart grid News - Page 4 of 6 - CNX Software

December 18, 2015 by Jean-Luc Aufranc (CNXSoft) - 8 Comments

TI SimpleLink CC1310 Wireless MCU Promises 20 Km Range, 20-Year Battery Life on a Coin Cell

Some LPWAN standards such as SigFox, LoRa, or nWave allows for transmission of data at low bitrate over several kilometers, and I’ve very recently featured Microchip’s LoRa modules and motes in this blog. So when Texas Instruments sent their December 2015 newsletter entitled Wireless MCU spans 20 km on a coin cell, I decided to have a look, and the company’s CC1310 wireless Cortex-M3+M0 MCU based on a proprietary sub GHz technology also claims to last 20-year on a coin cell for applications such as grid communication infrastructure and heat and water meters. SimpleLink CC1310 key features: Microcontroller – ARM Cortex-M3 @ up to 48 MHz with up to 128KB programmable flash, 8KB DRAM for cache/general purpose, 20KB Ultralow Leakage SRAM Sensor Controller – Ultralow power and autonomous; 16-Bit Architecture; 2KB of Ultralow Leakage SRAM for code and data RF core Cortex M0 core with 4KB RAM, and ROM Data […]

November 5, 2015June 18, 2018 by Jean-Luc Aufranc (CNXSoft) - 50 Comments

Espressif ESP32 Dual Core SoC Features Faster WiFi, Bluetooth 4.0 LE, and More Peripherals

Espressif teased us about a successor to ESP8266 a few months ago that would support both WiFi and Bluetooth Low Energy, and John Lee, working for Espressif Systems, has now sent a letter to ESP8266 developers announcing the new wireless SoC with two Tensilica L108 cores and called ESP32. Espressif ESP32 key improvements over ESP8266: Faster WiFi – Wifi has been upgraded to support HT40 speed (144.4 Mbps) and has a new RF architecture to simplify the application schematics Bluetooth Low Energy and Classic Dual core processor – 2x Tensilica L108 processors clocked at up to 160 MHz Low Power Mode Improvements – ADC conversions, level thresholds, etc.. can now be performed in deep sleep Peripherals – Capacitive touch, ADCs, DACs, I2C. UART, SPI, SDIO, I2S, RMII, PMW, etc… but no USB. More RAM – ~400 KB on-chip RAM Security – Hardware accelerated AES and SSL, and more undisclosed improvements. […]

October 29, 2015June 18, 2018 by Jean-Luc Aufranc (CNXSoft) - No Comments

Altair FourGee LTE Chipsets Promise 10 Years of Connectivity with AA Batteries for IoT Applications

Connectivity achieved with GSM,. 3G or LTE (4G) cellular networks is great for long distances, but usually costs and power consumption are too high for IoT or M2M communications, which explains why there are competing long range low power WAN standards such as Sigfox, LoRA or Weightless. Altair Semiconductor introduced two new LTE SoCs, namely FourGee-1150/6410 and FourGee-1160/6410 a few months ago, supporting respectively LTE Cat-0 and Cat-1 connectivity, and promising up to 10 years of battery life on AA batteries for smart meters, wearables, security alarms, city lightings, etc… Altair FourGee-1150 and FourGee-1160 key features and specifications: Processor – Multiple MIPS M5150 “Warrior” MCU cores LTE Connectivity FourGee-1150 LTE Release 12 Category-0 (1Mbps / 1Mbps), software upgradeable for supporting Release 13 features Integrated VoLTE/IMS/OTA-DM functionality FourGee-1160 LTE Release 11 Category-1 (10Mbps / 5Mbps), software upgradeable for supporting Releases 12 and 13 features Integrated VoLTE/IMS/OTA-DM with HD voice functionality Software […]

July 30, 2015 by Jean-Luc Aufranc (CNXSoft) - 12 Comments

Orvibo Wiwo S20 Smart Socket Now Sells for $16

Kankun KK-SP3 used to be the cheapest smart socket on the market at around $20, and it is hackable too, but only available with a Chinese / Australian plug, and for some reasons, many sellers stopped selling the device. Last year, a similar product called Orvibo Wiwo S20 launched with US, UK, EU or AU plug types, but sold for nearly twice as much as KK-SP3 at the time. The good news is that the price has gone down considerably, as it can be purchased for around $16 on GearBest, and it’s available on others for $20 to $26 including on Amazon US, DealExtreme, and GeekBuying. Let’s remind us of the specifications first: Material – ABC 94V-0 (fireproof) Wi-Fi 802.11 b/g/n Security – WEP, WPA-PSK or WPA2-PSK Power Plug – US, Europe, United Kingdom or Australia plug Output Current – 10A Output Power – 2000W max. Voltage Range – 100-240V […]

July 31, 2014 by Jean-Luc Aufranc (CNXSoft) - 69 Comments

Orvibo Wiwo S20 Wi-Fi Smart Socket Features US, EU, UK, or AU Plug Types

I’ve previously covered several Chinese Wi-Fi smart sockets including Broadlink SP2 also supporting power monitoring, and Kankun KK-SP3, a cheaper, more basic version that can only be turned on and off manually or via timers, and which runs OpenWRT. These plugs have one thing in common: they only come with Australian/Chinese plugs, so if you want to use them in Europe, the US, or United Kingdom, you’ll need an adapter, which may not the the safest things to do, and it’s also inconvenient. Orvibo Wiwo S20 is another model that appears to have the capabilities and a price similar to Broadlink SP2, but available in four flavors with US, EU, UK, and AU plug types. Orvibo Wiwo S20 is made of fireproof ABS, and is significantly smaller than Broadlink SP2, but the rest of the specifications are very similar: Material – ABC 94V-0 (fireproof) Wi-Fi 802.11 b/g/n Security – WEP, […]

March 4, 2014 by Jean-Luc Aufranc (CNXSoft) - 4 Comments

BroadLink SP2 Wi-Fi Smart Socket for iOS and Android Adds Support for Energy Monitoring, Motion Sensing

Broadlink SP1, a low cost Wi-Fi smart socket released last year, allows you to control your electric appliance with your mobile device running iOS or Android. You could turn it on or off, set timers, and so on. An updated model is now available, Broadlink SP2, that adds energy monitoring to the features found in the previous model, to track your historic and live power consumption on your smartphone or tablet, as well as a motion sensor to automatically turn off the lights, for instance, if you are away (Auto Home / Auto Away feature). The hardware specifications are very similar to SP1 except it’s using a case made of polycarbonate plastic instead of ABS, and the device is a bit bigger: Material – PC Wi-Fi – 802.11 b/g/n Power Plug – Three flat-pin plug (Australia type) Voltage – 100~265V @ 50-60 Hz Output Current – 10A Output Power – […]

February 21, 2014February 21, 2014 by Jean-Luc Aufranc (CNXSoft) - 4 Comments

802.11ah Wi-Fi (900 MHz) to Provide Low Power, Long Range Connectivity for the Internet of Things

Most devices now feature Wi-Fi modules capable of handling 802.11 b/g/n at 2.4 Ghz (and 5 GHz for dual band Wi-Fi), and newer devices and routers boast 802.11ac connectivity @ 5GHz with increased bandwidth (up to 1.2 Gbit/s in theory, maybe around 400 Mbit/s in practive), and in some case increased range with beam-forming. But thanks to an article on EETimes, I’ve learned there’s another upcoming Wi-Fi standard called 802.11ah operating in the 900MHz range, with data rates from 150 Kbit/s with a 1 MHz band to as much as 40 Mbit/s over an 8 MHz band, lower power consumption, and a least double of the range of a typical 802.11n device,capable of covering an area of about 1 km2. The target applications are sensors networks, backhaul networks for sensor and meter, and extended range Wi-Fi, as the standard allows long range and more clients at low bitrates. This new […]

December 10, 2013 by Jean-Luc Aufranc (CNXSoft) - 3 Comments

Smart Power Strip Controls and Monitors your Electric Appliances with Android or iOS Devices (Crowdfunding)

Broadlink SP1 and Plugaway are smart sockets controlled by your mobile device(s) via Wi-Fi, but they only support one appliance at a time. Smart Power Strip will fix that thanks to 4 sockets with independent power consumption meters that are controlled via Wi-Fi by Android or iOS devices. The power strip is comprised of 4 independent relays, 2 USB ports, a 120V or 230V circuit breaker, and a dual 2.4 GHz module for Wi-Fi and Home Automation (MESH) technology. It supports 100-250V AC, with a maximum of 15 Amps. The smart power strip will be available for US, EU, UK, and AU standards. That’s about all we know about the hardware. The mobile app will allow you to turn on/off devices manually, monitor each appliance’s power consumption individually, set timers, and monitor which device is on/off. As long as you have Internet access, the smart power strip can be accessed […]