smartwatch

Posted on by Jean-Luc Aufranc (CNXSoft) - 2 Comments on F68 Sports Smartwatch Unboxing

F68 Sports Smartwatch Unboxing

Makibes F68 is a smartwatch with fitness features (HRM, pedometer…) and smartphone notification support, that is supposed to last around one week on a charge, and certified with an IP67 ingress protection rating. GearBest asked me if I wanted to review that model since SMA-Q watch was a disappointment, and I accepted so I have yet another smartwatch to try out. Today. I’ll take a few pictures of the watch and accessories, better writing a full review in one or two weeks. The package looks quite nice, but one detail is quite revealing: there’s no Makibes brand, nor F68 model name anywhere, and it looks exactly like FlyShark BW410 reported a few days ago by Charbax, so it must be an OEM design that will show up under multiple brand names, not only Makibes. The watch is not fully assembled, and instead the watch face comes with two watch bands, […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 16 Comments on Makibes F68 is a $35 IP67 Rated Sports Smartwatch with HRM & 7-Days Battery Life

Makibes F68 is a $35 IP67 Rated Sports Smartwatch with HRM & 7-Days Battery Life

So far my quest for a smartwatch as not been successful, with massive disappointments with both No.1 D3 smartwatch and SMA-Q color e-Paper smartwatch, with the latter completely failing after a week. The next potential candidate is Makibes F68 with similar features as SMA-Q, but instead with a grayscale display, IP67 ingress protection rating which should make it suitable for swimming (apparently not, see comments), as well as a promised 7-day battery life during “normal usage”. Makibes F68 specifications: MCU/Memory/Storage – Not disclosed but it’s supposed to run Nucleus RTOS. Display – 1″ round capacity touchscreen display, 128×128 resolution, always on Connectivity – Bluetooth 4.0 Sensors – 3-axis accelerometer and gyroscope Battery – 180 mAh charged via magnetic connector Dimensions – 38 x38 x 10 mm (aluminum alloy material) Weight – 31 grams IP Rating – IP67 meaning it’s been tested for 30 minutes under one meter of water. The […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 14 Comments on SMA-Q Smartwatch Mini Review and Teardown

SMA-Q Smartwatch Mini Review and Teardown

I had great hopes for SMA-Q smartwatch, as it features an always on color e-Paper display, a built-in heart rate monitor, and promised 30-day standby battery life, as well as being 30-meter water resistant. But last week, I found out that the latter did not mean waterproof, and instead the watch was rated IP65 that’s only good enough to wash hands and a little rain, but not showering let alone swimming. In the last week, I could play with the watch, and found some serious Bluetooth connectivity issues (with Iocean M6752 smartphone), and I was recommended to upgrade the firmware of SMA-Q watch, and after that my Bluetooth issue have somewhat improve, but everything pretty much went downhill, and the watch is now out of order, and shows no sign of life. So while I was expecting to write a full review, I’ll simply report with experience with the watch […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 17 Comments on How to Upgrade SMA-Q Smartwatch Firmware

How to Upgrade SMA-Q Smartwatch Firmware

I’ve started testing SMA-Q smartwatch, and so far I’ve had lots of issues with Bluetooth connectivity. The watch can rarely pair with my Android smartphone, and I was unable to enable features like Anti-lost and Sedendary alerts as the app would always report there was no connection. The company has sent me instructions to upgrade the firmware, and it seems to have improved things a little. So first you need to install SMA Services app by scanning the QR code on the user’s manual, or download the apk by following this link. Once this is done you can register, or skip registration. Now go to Setting, and select Connect watch. You should see a circle as on the left side above reading Searching watch, then Bluetooth Connecting, before seeing a message the connection was successful. You’ll probably them want to tap on Upgrade app, before tapping on Firmware upgrade (local […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 5 Comments on SMA-Q e-Paper Smartwatch Unboxing and Details

SMA-Q e-Paper Smartwatch Unboxing and Details

When I first discovered SMA-Q smartwatch, I really found it interesting with its always-on color e-Paper display, Bluetooth 4.0 connectivity, heart rate monitor, and promise of 30-day battery life (standby) for just $56. GearBest send me one sample so that I can have a close look at this interesting smartwatch and fitness tracker. I’ll start by unboxing the watch, and checkout some details that were unclear in the specifications. I received it in a retail package that calls it SMA WATCH-Q instead of SMA-Q watch with a link to the official website. On one side we’ll get the specifications, all in Chinese, but even if you can read, it’s clear the watch supports Bluetooth 4.0 and Android 4.4+ IOS7.0+ as announced in the specs, and we also learned a 150mAh battery is included, and it’s compliant with IP65 ingrees protectin ratings meaning it’s “protected from total dust ingress and low […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 4 Comments on Omate Rise is a $199 3G and WiFi Smartwatch Powered by Mediatek MT2601 SoC (Crowdfunding)

Omate Rise is a $199 3G and WiFi Smartwatch Powered by Mediatek MT2601 SoC (Crowdfunding)

Most smartwatches sold on the western markets are designed to be smartphone’s companions, and only come with Bluetooth LE connectivity, while we’ve seen many smartwatches (aka watchphones) with SIM card slot originating from China in the past, including the lower end No.1 D3 smartwatch which I reviewed recently. But this may be changing, as Omate is going to launch a new smartwatch called Omate Rise that will include 3G connectivity via a micro SIM card slot, as well as WiFi, Bluetooth Smart, and GPS. Omate Rise specifications: SoC – Mediatek MT2601 dual core ARM Cortex A7 @ 1.2GHz with ARM Mali-400 MP GPU System Memory –  512MB RAM Storage – 4GB flash Display – 1.3″ round muti-touch color display with 360×360 resolution (Innolux) Connectivity – Bluetooth 4.1 LE (A2DP profile), WiFi 802.11 b/g/n, GPS Cellular Connectivity – 3.5G HSDPA (2100/1900 MHz), GPRS / EDGE /GSM (850/900/1800/1900 MHz); micro SIM card […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 4 Comments on Thunderboard Wear is a $75 Smartwatch Development Board by Silicon Labs

Thunderboard Wear is a $75 Smartwatch Development Board by Silicon Labs

A few days ago I watched an ARMDevices.net’s video about an ARM’s smartwatch reference design running mbed OS 3.0, powered by a Silicon Labs EFM32 Giant Gecko Cortex M3 MCU, and promising up to 2 months battery life on a 160 mAh battery. While I could not find the full details about the reference design, I noticed Silicon Labs also launched a development board called Thunderboard Wear, based on the same platform, just quite bigger, and still wearable… (Sort of) Thunderboard Wear specifications: MCU – Silicon Labs EFM32GG995F1024 ARM Cortex-M3 MCU up to 48 MHz with 128 kB RAM,1 MB Flash External Memory – 256 kB external SRAM External Storage – micro SD card slot Display – 128×128 pixel Memory LCD from Sharp Connectivity – Bluetooth 4.1 smart module (Silicon Labs BGM111), upgradeable to Bluetooth 4.2 Sensors Ambient Light Sensing (ALS) and Proximity/Gesture via Silicon Labs Si1141. Optical hear-rate monitoring […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 21 Comments on No.1 D3 Smartwatch (Mediatek MT6261) Review

No.1 D3 Smartwatch (Mediatek MT6261) Review

Since I’ve listed the specs and torn down No.1 D3 smartwatch, I’ve spent several days wearing the smartwatch / watchphone, and trying most of its features, so it’s time for a review. I’ll go through all screens of the user interface, include a video review, before providing a conclusion to this review Charging the watch take between 15 to 30 minutes, and you can turn it on by pressing the only button on the side of the watch for a few seconds. The first menu you are likely to see if the one with the phone functions including the Dialer, messaging, phonebook and call logs. You can use these in two ways: with a micro SIM card inserted into the watch, or/and via your smartphone connected over Bluetooth. I mostly used the watch connected to my smartphone, but both methods worked for me. When you receive a call, it’s not […]