som News - Page 23 of 73 - CNX Software

August 26, 2021October 23, 2022 by Jean-Luc Aufranc (CNXSoft) - 17 Comments

Turing Pi V2 mini-ITX cluster board takes four Raspberry Pi CM4 or NVIDIA Jetson SoMs

The Turing Pi V2 is a mini-ITX cluster board that builds on the Turing Pi mini-ITX cluster board taking up to 7 Raspberry Pi Compute Modules introduced in 2019, but instead supports up to four Raspberry Pi CM4 (Compute Modules 4) or NVIDIA Jetson Nano/TX2 NX/Xavier NX SO-DIMM system-on-modules. The Turing Pi 2 board is equipped with two Mini PCIe sockets, two Gigabit Ethernet ports, two SATA III ports, four USB 3.0 ports, a 40-pin GPIO header, and a 24-pin ATX connector for power. Since board-to-board connectors – as found in Raspberry Pi Computer Module 4 – are not ideal for density, the company went with a design including 260-pin SO-DIMM connectors plus CM4 adapter boards, a design that allows them to also integrate other SoMs like the NVIDIA Jetson SO-DIMM modules. Turing Pi V2 specifications: SoM interface – 4x 260-pin SO-DIMM slot for up to four Raspberry Pi CM4 […]

August 25, 2021August 25, 2021 by Jean-Luc Aufranc (CNXSoft) - 12 Comments

SolidRun LX2162A SOM packs 16 Cortex-A72 cores, 32GB DDR4 onto a 58x48mm module

SolidRun LX2162A SOM is a compact (58x48mm) system-on-module based on NXP LX2162A 16-core Cortex-A72 networking processor and equipped with up to 32GB DDR4 RAM that’s 25% of the size of the company’s earlier COM Express Type 7 computer-on-module based on NXP LX2160A 16-core Arm Cortex A72 communication processor and found in ClearFog CX LX2K networking board. The much smaller size has been made possible by replacing the SO-DIMM sockets with soldered RAM, and switching from LX2160A to LX2162A SoC with similar features, but offered in a 23x23mm package that is nearly one quarter the size thanks to a reduction of the number of SerDes and PCIe interfaces, and manufacturing with a 16nm FinFET process technology. LX2162A SOM specifications: SoC – NXP Layerscape LX2162A communication processor with 16x Cortex A72 cores clocked at up to 2.0 GHz (option for the 12-core LX2122A, or 8-core LX2182A) Memory – Up to 32GB DDR4 […]

August 20, 2021August 21, 2021 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

Qualcomm QRB5165 system-on-module is made for robotics applications

Lantronix Open-Q 5165RB is a tiny System-on-Module (SoM) based on the same Qualcomm QRB5165 octa-core IoT processor we’ve just seen in Qualcomm Flight RB5 5G Platform high-end drone reference design. The ultra-compact (50x29mm) module comes with 8GB LPDDR5, 128GB UFS flash, multiple MIPI camera and display ports, WiFi 6 and Bluetooth 5.1, and various I/Os. Lantronix Open-Q 5165RB module specifications: SoC – Qualcomm QRB5165 SoC built on 7nm technology with Octa-core CPU with 1x Kryo Gold prime @ 2.84 GHz, 3x Kryo Gold @ 2.42 GHz, 4x Kryo Silver @ 1.81 GHz Hexagon 698 DSP with quad Hexagon Vector eXtensions Adreno™ 650 GPU @ up to 587 MHz Spectra 480 Image Signal Processor Adreno 665 Video Processing unit – Decode up to 4K240/8K60, Encode up to 4K120/8K30, Concurrent 4K60 decode & 4K30 encode for wireless display NPU230 Neural Processing unit SPU240 Secure Processing unit Up to 15 TOPS of combined […]

August 10, 2021August 11, 2021 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

MinCab is the smallest Raspberry Pi CM4 carrier board ever

Minimal Carrier Board for Raspberry Pi Compute Module 4

Carrier boards for Raspberry Pi CM4 modules are all over the place for routers, NAS, industrial gateways, and more. Here’s another one with the Minimal Carrier Board for Raspberry Pi Compute Module 4, or MinCab, that powers the RPi CM4 module via a USB Type-C port. That’s about all it does, although you would also be able to access some GPIOs, 5V, 3.3V, and GND signals via pads on the carrier board. Specifically, eight GPIOs are accessible with IO14, IO15, IO2, IO3, IO4, IO12, IO13, and IO18. Ivan Kuleshov explains this can be useful for Smart Home systems for instance, but it could be anything that requires WiFI and/or Bluetooth connectivity, a powerful Linux capable processor (as opposed to something like ESP32), and a few I/Os. The MinCab might be a good alternative to the upcoming (and delayed) Raspberry Pi 4 Model A for people wanting to use Broadcom BCM2711 […]

August 5, 2021December 22, 2021 by Jean-Luc Aufranc (CNXSoft) - 11 Comments

Overview and List of System-on-Module and Computer-on-Module Standards – Q7, SMARC, COM HPC, and More

A System-on-Module (SoM), also known as a Computer-on-Module (CoM), is a small board with the key components of a computer such as SoC, memory, and possibly others components such as PMIC (Power Management IC), an Ethernet PHY, as well as one or more connectors used to connect to a baseboard, also called carrier board, which features standard ports such as Ethernet (RJ45), USB ports, SATA, power jack and so on. The advantages of using of baseboard + SoM design compared to a single board are at least twofold: Most of the PCB design complexity is often around the CPU/SoC and high-speed buses connected to the CPU/SoC. So you could buy an SoM, design your own baseboard and get a complete design relatively in a short amount of time, with reduced development resources and costs. The design is modular, so you could easily upgrade from one SoM to another one. For […]

August 2, 2021February 22, 2022 by Jean-Luc Aufranc (CNXSoft) - 8 Comments

Raspberry Pi Compute Module 4 mini router keeps cool with aluminum alloy cover

There are many hardware platforms based on Raspberry Pi CM4 system-on-module, but in most instances, only the baseboard is provided, and you have to handle mounting and/or make an enclosure by yourself. One of those boards was Seeed Studio’s “Dual Gigabit Ethernet Carrier Board for Raspberry Pi Compute Module 4”, which as the name implies, offers two Gigabit Ethernet ports, as well as two USB 3.0 ports, and a micro HDMI port for video output. I say “was” because the company has now designed a PC/ABS case with an aluminum alloy cover acting as a heatsink to keep the RPi CM4 module cool. Raspberry Pi Compute Module 4 mini router’s specifications: SoM – Raspberry Pi CM4 with up to 8GB RAM, 32GB eMMC flash, dual-band WiFi 5 and Bluetooth 5.0 module; replaceable by any Raspberry Pi Compute Module 4 Storage – MicroSD card slot (only accessible with RPi CM4Lite module) […]

July 28, 2021July 28, 2021 by Jean-Luc Aufranc (CNXSoft) - 3 Comments

Boardcon EM3566 Linux SBC is powered by a Rockchip RK3566 System-on-Module

Another day, another platform based on Rockchip RK3566 quad-core Cortex-A55 AIoT processor with Boardcon EM3566 SBC powered by a Rockchip RK3566 based System-on-Module (SoM). The single board computer comes with up to 2 to 8GB LPDDR4 RAM, 4GB to 32GB eMMC flash, SATA and NVMe SSD support, HDMI, MPI DSI, and eDP display interfaces, Gigabit Ethernet, as well as expansion options through M.2 and mPCIe sockets. CM3566 RK3566 System-on-Module Let’s check out CM3566 CPU module which offers the following specifications: SoC – Rockchip RK3566 with a quad-core Cortex-A55 processor @ up to 1.8GHz, Arm Mali-G52 2EE GPU with support for OpenGL ES 1.1/2.0/3.2. OpenCL 2.0. Vulkan 1.1, 0.8 TOPS AI accelerator, 4K H.265/H.265/VP9 video decoder, 1080p100 H.265/H.264 video encoder. System Memory – 2GB LPDDR4 (up to 8GB) Storage – 4GB eMMC flash (Up to 32GB) 186 castellated holes with signals for Storage – 2x SDMMC, SATA Display – LVDS/MIPI DSI, […]

July 26, 2021July 26, 2021 by Jean-Luc Aufranc (CNXSoft) - No Comments

TurboX C865 CPU module and 96Boards devkit feature Qualcomm QCS8250 IoT processor

Thundercomm has unveiled another Qualcomm IoT module and development kit with the TurboX C865 SOM and development kit based on Qualcomm QCS8250, based on Snapdragon 865 but for IoT applications, which follows our coverage of the company’s TurboX CM2290 and C2290 SoM & devkit based on Qualcomm QCM2290/QCS2290 quad-core Cortex-A53 processor several days ago. The new TurboX C865 system-on-module is for higher-end IoT applications with a faster processor combines with 8GB LPDDR5 RAM, and 128G UFS storage, WiFI 6 & Bluetooth 5.1 connectivity, and the company also offers a 96Boards compliant development kit to help with the development of more advanced IoT products running Android 10. TurboX C865 SoM Specifications: SoC – Qualcomm QCS8250 octa-core Kryo 585 processor with Adreno 650 GPU, Adreno 665 VPU, Adreno 995 DPU, Hexagon DSP with quad HVX, Spectra 480 ISP; 15 TOPS AI processing power System Memory – 8GB LPDDR5 (PoP) Storage – 128G […]