HD18T Android DVB-T2 Receiver Mini Review

I’ve had HD18T Android TV box with a DVB-T2 tuner for several months, but I’ve only installed a roof antenna recently, so I’ve decided to give it another try since my indoor antenna did not pick-up any signal with that box. The set-top box is also known as EM6-T2 or HD18T2, and features Amlogic AML8726-MX dual Cortex A9 processor which has been used in numerous boxes in the past, so I will only focus on my experience with the DVB app in this mini review. If you want to use DVB-T2 go straight to the right and click on DVB app. Where you’ll then be greeted with a pop-up windowsasking if if you want to scan channels. You can do autoscan, manual scan (for one frequency), select the area (France/Taiwan/UK/Italy/Australia only), and enable/disable LCN (Logical Channel Numbering). At first I selected “Australia”, and the system did not find any channels, […]

Linux based Vu+ DVB Set-top Boxes Now Support XBMC/Kodi

Vu+ Duo2, Solo2 and Solo SE are high-end Linux based DVB receivers powered by Broadcom processors made by Ceru, and with a relatively active community of users and developers. All three models have recently received support for XBMC in their “Black Hole” firmware. Solo SE is the most recent model having been released in 2014, against Duo2 and Solo2 that have been selling since 2012 according to Wikipedia. Since I’ve never heard about these, I’ll check out Duo2, as it comes with the most features out of the three. Vu+ Duo2 specifications: SoC – Broadcom BCM7424 dual core MIPS processor @ 1.3 GHz with VideoCore IV GPU System Memory – 2GB RAM Storage – 1 GB NAND flash + SATA III interface for 2.5″ and 3.5″ HDD (internal) + eSATA + Video Output – HDMI, SCART, Composite, and Component (YPbPr) Audio Output – HDMI, stereo audio, and optical S/PDIF Tuners – […]

Broadcom Unveils BCM725x SoCs for STBs and TV Sticks

Broadcom has recently announced two new SoCs, namely BCM7250 and BCM72502, respectively targeted at OTT streaming media player form factor and  HDMI stick or dongle applications.  Both feature Broadcom’s Brahma-B15 ARMv7-A cores, support 10-bit H.265, HDMI 2.0, MHL 2.0, and up to to 4×4 5G WiFi via BCM4366 WiSoC. Key features listed by Broadcom for both SoCs: High Efficiency Video Coding (HEVC)/H.265 compression 6000 DMIPS B15 ARMv7-A CPU 1.0 Gpix/s OpenGL ES 3.0 3D GPU Supports HDMI 2.0 with HDCP 2.2 or MHL 2.0 digital video output PCIe connectivity to Broadcom BCM4366 4×4 carrier-grade 5G WiFi 480/576p30 transcode 1080p60 10-Bit HD HEVC decode and 4Kp60 upscale High Performance DDR3/DDR4 system memory interface Supports Android, Chromium, DIAL, DLNA CVP2, Miracast protocols Supports Broadcom Trellis Multi-Application Framework and DTVKit software stack The company can also provide reference platforms with 2×2 and 4×4 5G WiFi connectivity options via a high-speed PCIe interface, and announced […]

UTStarcom MC8718 is a Funny Looking Tegra K1 Based Android Game Console

An article about a Mediatek MT8685 based Android media player on AndroidPC.es, made me look into UTStarcom products, and beside some other MT8685 based quad core set-top boxes such as MC8685A and MC8685B, I found a weird/funny/intriguing/futuristic looking game console STB powered by Nvidia Tegra K1 quad core cortex A15 processor named MC8718. UTStarcom MC8718 specifications: SoC – Nvidia Tegra K1 quad core Cortex A15r3 processor @ 2.3 GHz with Kepler GPU System Memory – 2GB RAM Storage – 16GB internal storage + micro SD card slot Video and Audio  Output – HDMI 1.4b up to 4K @ 30Hz Video Decode – H.264, MPEG-4, etc.. Audio Decode – MP3, AAC, optional Dolby and DTS, etc.. Connectivity – 10/100M Ethernet, Dual band 802.11 b/g/n Wi-Fi, and Bluetooth 4.0 USB – USB 2.0 interface Misc – IR receiver Power Supply – 5V The company claims support for TegraZone and Shield games, as […]

WeTek Play Set-Top Box Now Also Comes with an ATSC Tuner

WeTek Play is an Android media player that comes with a digital TV tuner, and in my recent updated review with a DVB-S2 tuner I found out that the software for live TV either via Internet or satellite was pretty good, and despite the older Amlogic AML8726-MX processor used in the box, it could still be recommended for watching live TV, with featuring like PVR, TimeShifting and EPG working reasonably well. At launch however, WeTek Play was only available with DVB-S2 or DVB-C/T/T2 tuners, so North American did not have the option to watch free-to-air digital TV on the box. This has now been resolved, as the company has launched Wetek Play with an ATSC tuner. The rest of the specifications for the ATSC model are exactly the same: SoC – Amlogic AML8726-MX dual core Cortex A9 @ 1.5GHz with a dual core Mali-400MP GPU System Memory – 1GB DDR3 […]

Rockchip RK3036 Android 4.4 TV Boxes with H.265 Codec Support To Sell for $10

Rockchip announced RK3368 64-bit processor yesterday for mid-range tablets and 4K media player, but the company also have some new ultra low cost TV box and HDMI TV stick solution with Rockchip RK3036 dual core Cortex A7 processor that will go into $9.9 TV boxes running Android 4.4. The price is most probably factory price, but that means $20 H.265/HEC capable Android media players are probably around the corner. You can already get an RK3066 TV dongle (MK808 and similar) for less than $30 in Aliexpress, so the new solution will likely decrease the price by $5 to $10. Technical specifications of RK3036 reference design: SoC – Rockchip RK3036 dual core Cortex A7 processor @ up to 1.2 GHz with Mali-400MP GPU System Memory – 256MB DDR3 or DDR3L Storage – 2GB flash. RK3036 supports MLC NAND, eMMC 4.5. Video & Audio Output – HDMI 1.4a. The chip also supports […]

Xtreamer Prodigy 4K Android Media Streamer & Recorder Comes with a 3.5″ SATA Bay

Last month, we discovered Zidoo X9 Android TV box powered by Mstar MSO9810 quad core processor, and featuring an HDMI input for PVR function. There’s now an alternative with Xtreamer Prodigy 4K based on the same Mstar processor, but adding an internal SATA bay for 3.5″ Hard drives. Xtreamer Prodigy 4K specifications: SoC – Mstar MSO9180D1R quad core Cortex A9 processor up to 1.5GHz with octa-core ARM Mali-450MP6 GPU System Memory – 2GB DDR3 Storage – 8GB eMMC flash + 3.5″ SATA bay up to 3TB + multicard slot Video Output / Input – HDMI output up to 4K @ 30HZ, HDMI input with PVR and Time Shifting support up to 4K @ 30 Hz Audio I/O – HDMI Out and In, and optical S/PDIF Video Codecs & Containers – H.264, H.265, MPG/MPEG/MP4, TS, M2ts, AVI, BD-ISO, 3D-MVC, DVD-ISO, WMV, FLV, F4V, MKV, Xvid, DAT, VOB, AVS, 3GP, WebM, OGM, […]

Top 10 Posts of 2014 and Stats on CNX Software

Wow! After a slow start of the year, 2014 has been a busy year as new devices based on newer processor from Amlogic started to flood the market in Q2, soon followed by even more Rockchip RK3288 based media players, and then some more Amlogic S805 and Allwinner A80 boards and devices. It’s now the last day of the year, so just like in 2013, it’s time to look back on the main trends of the year, and based on the list of the top 10 most visited posts below, the new generation of ARM Android media players were the most important story of the year on CNX Software, but we also saw more IoT devices and board like Vidonn X5 or LinkIT One, lots of new Wi-Fi modules, and by the end of the year ESP8266 seemed to have won that fight, but being found in $3 Wi-Fi modules. […]

EDATEC Raspberry Pi 5 fanless case