wearables News - Page 16 of 25 - CNX Software

October 11, 2016 by Jean-Luc Aufranc (CNXSoft) - 4 Comments

Samsung Starts Mass-Production of Exynos 7 Dual (7270) Processor used in Galaxy Gear S3 Smartwatch

Samsung has just issued a press release announcing the Korean company had just started mass-production of the first SoC for Wearables using 14-nm FinFET process with their Exynos 7 Dual (7270) dual Cortex A53 processor. Exynos 7270 is also said to be the first such SoC to embed full connectivity and LTE modem integration. Exynos 7270 specifications: CPU – Dual-core ARM Cortex–A53 processor @ up to 1.0 GHz GPU – ARM Mali-T720 Memory – LPDDR3 support Storage – eMMC 5.0, SD card interfaces Display – Up to 960×540 (qHD) resolution Camera – Up to 5MP pixel sensor support Multimedia – HD (720p@30fps) video with HEVC, H.264, VP8 Codec LTE Modem – LTE Category 4 non-CA Connectivity – WiFi, Bluetooth 4.2, FM Radio GNSS – GPS, GLONASS, BeiDou PMIC – Integrated in SiP-ePoP package Package – SiP-ePoP, 10x10mm (SiP: System-in-Package; ePoP: embedded Package-on-Package) The SoC will be packaged inside a SiP-ePOP […]

September 5, 2016 by Jean-Luc Aufranc (CNXSoft) - No Comments

Tizen Studio 1.0 Replaces Tizen SDK for Smartphones, Wearables and TVs

Tizen has converged all Tizen SDK for mobile, wearables, and TV to Tizen Studio since the beginning of the month, and released Tizen Studio 1.0 for developers interested in developing app for Tizen smartphones, TVs and/or smartwatches such as the latest Samsung Gear S3. So instead, you’ll now be able to select the targets platform and profiles within Tizen Studio. Some of the key changes made to the development environment in Tizen Studio 1.0 include: Launching tools: Installer, Uninstaller, and Package Manager Developing tools: IDE perspective theme, Project Wizard, Certificate Manager, and Menu and tool icons UI tools: UI Builder, Component Designer, and EDC Editor Testing tools: Emulator Testing tools: Dynamic Analyzer for memory and CPU profiling Other improvements in Tizen application development environment Tizen Studio is available for the 32-bit and 64-bit version of Windows, and Ubuntu, as well as for Mac OS with one version with the graphics […]

August 30, 2016August 30, 2016 by Jean-Luc Aufranc (CNXSoft) - No Comments

Fitbit Introduces Charge 2 and Flex 2 Fitness Trackers

My first activity tracker, Vidonn X5, worked reasonably well and lasted for over a year, but the subsequent models I tried were all mostly disasters, especially as they added some features like a heart rate monitor that did not work reliably, and worse, their lifetime was poor, lasting only a few days to a few weeks before stopping working. My Xiaomi Mi Band 2 died last week-end, two days after a firmware update which decreased battery life to less than a day, and now refuses to charge. While the HRM was utterly useless, it did count steps fairly accurately, and battery life was good. Sadly, it would only last about two months. So at this stage, it might be worth spending more for a fitness tracker, and Fitbit has unveiled two new models with Charge 2 and Flex 2. Fitbit Charge 2 includes a 1.5″ OLED touchscreen display, and an […]

August 8, 2016 by Jean-Luc Aufranc (CNXSoft) - 6 Comments

TW68 Smart Bracelet Measures Blood Pressure and Heart Rate for $22 and Up

Some people may need to frequently measure their blood pressure because of their health condition, but it’s often a cumbersome experience, so they may get lazy, and not do it as often as needed. TW68 smart bracelet should make this easy, as it’s your typical fitness tracker with an heart rate monitor, but adding the capability to also measure blood pressure. It’s also very cheap, and I first found it on DealExtreme where it sells for just $24. TW68 specifications: MCU – Nordic Semi NRF51822 ARM Cortex M0 micro-controller with 2.4 GHz radio Data Storage – 7 days detailed data, 23 days total data Connectivity – Bluetooth 4.0 LE Display – 0.49″ OLED display Sensors – PixArt-PAH8001EI blood pressure sensor; 6-axis Invensense-MPU6500 accelerometer and gyroscope Function Health tracker: Blood pressure measurement, Heart rate monitor, Pedometer, Sleep tracker Other functions: Call/Message notification, Fall reminder, Social sharing, Time, Alarm clock Misc – […]

July 15, 2016July 15, 2016 by Jean-Luc Aufranc (CNXSoft) - 5 Comments

PSF-A85 is a $2 ESP8285 WiFi Board for IoT and Wearables

Last month, we found out that Espressif has made a smaller version of ESP8266 targeting wearables called ESP8285, but the only development board available at the time was quite more expensive than usual at about $25. ITEAD has now released an ESP8285 module with some I/Os and an IPEX connector which they sell for just $1.99 + shipping. PSF-A85 specifications: SoC – Espressif ESP8285 Tensila WiFi SoC @ 80/160 MHz with 1MB flash Connectivity WiFi 802.11 b/g/n/d/e/i/k/r with support for STA/AP/STA+AP modes, WPA/WPA2 PSK and WEP security Antenna – IPEX connector (antenna not included) or “stamp hole interface” Expansion – 24-pin with GPIO, PWM, UART up to 460800 bps, SPI, ADC, Power Supply – 3.3 V Dimensions – 13.7 x 13.4 mm More technical information include the schematics (PDF only) and ESP8285 datasheet can be found in the Wiki, which sadly does not contain any software / getting started information, […]

July 6, 2016July 6, 2016 by Jean-Luc Aufranc (CNXSoft) - No Comments

Nordic Semiconductor nRF52832 Cortex-M4 ANT & Bluetooth LE SoC Gets Even Tinier

Nordic Semiconductor nRF52832 is a Bluetooth 4.2 LE SoC based on an ARM Cortex-M4F core that was first released about a year ago in a QFN48 package targeting IoT and Wearables. But if your application is really tight on space and the 6x6mm package is just too big, the company has just introduced a 3.0×3.2mm WL-CSP (Wafer Level Chip Scale Package ) package for nRF52832 decreasing the area to about one quarter of the QFN package The specifications are exactly the same as the QFN, but let’s see what we’ve got in that 9.6mm2 package: MCU Core – ARM Cortex-M4F @ 64 MHz with DSP & FPU, 512kB Flash and 64kB RAM 2.4 GHz radio for ANT, Bluetooth 4.2 LE, and Gazell connectivity; 5.5mA peak RX/TX currents; on-chip RF Balun On-chip NFC tag Peripherals – 3x Master/Slave SPI, 2x Two-wire interface (I²C), UART (RTS/CTS), 3x PWM, Digital microphone interface (PDM) Security […]

June 22, 2016August 28, 2020 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

Espressif ESP8285 is just like ESP8266 but with 1MB built-in Flash, and Designed for Wearables

Espressif announced ESP8285 WiFi SoC was entering production last March. The new processor is based on ESP8266, but the company added 1MB built-in flash to make the solution smaller, and more suitable to wearables such as smartwatches and activity trackers. ESP8285 features a Tensilica L106 32-bit MCU and another ultra-low-power 16-bit RISC core, as well as 802.11 b/g/n/d/e/i/k/r WiFi connectivity. AI Thinker has already produced a tiny module based on the solution, called ESP-8285, and another person has developed an ESP8285 development board sold on Tindie for $24.95, and with some code sample (Arduino sketches) on Github. You’ll also find some more technical information on a Devacron blog post, or inside the datasheet on Espressif website. Via Hackaday Jean-Luc Aufranc (CNXSoft)Jean-Luc started CNX Software in 2010 as a part-time endeavor, before quitting his job as a software engineering manager, and starting to write daily news, and reviews full time later […]

June 6, 2016June 16, 2016 by Jean-Luc Aufranc (CNXSoft) - 6 Comments

Energympro EP-SH09 Bluetooth LE Fitness Tracker Features AMS AS7000 Biosensor

I wrote about AMS AS7000 biosensor designed for heart rate monitors last fall, and one of my regular reader noticed the sensor, made his company evaluate it, and since the results were pretty good, designed a product with it. And here I am with a sample of Energympro EP-SH09 fitness tracker with an OLED display, HRM based on AS7000 sensor, and IP67 ingress protection rating. Some of Energympro EP-SH09 technical specifications: MCU – Texas Instruments CC2640 ARM Cortex-M3 48 MHz Display – 0.86″ OLED display, 96×32 resolution Connectivity – Bluetooth 4.0 LE Input – Touch area at the bottom of the display Sensors – AMS AS7000 biosensor for HRM, motion sensors Battery – 45 mAh LiPo battery which looks good for 4 to 5 days. Dimensions – 40 x 18 x 12.9 mm Weight – 6 grams Ingress Protection Rating – IP67 The device can pair with smartphone using Smart […]