Processors Category - Page 1169 of 1184 - CNX Software

September 20, 2011September 20, 2011 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

Emulate Gumstix Overo COM with Qemu and Linaro Nano Image

Overa COMs are low cost computer-on-modules (COM) built around OMAP3503 and OMAP3530 depending on the model. Such device can be purchased on gumstix website. However if you just want to try a program on the board, you could use QEMU to emulate the Overo board as follows: Download pre-built image. (nano is a minimal linux ditribution without UI): wget http://releases.linaro.org/images/linaro-n/nano/11.07/overo-nano.img.gz gunzip overo-nano.img.gz Install the qemu tools: sudo add-apt-repository ppa:linaro-maintainers/tools sudo apt-get update sudo apt-get install qemu-user-static qemu-system Run the image: qemu-system-arm -M overo -clock unix -serial stdio -device usb-kbd -drive file=/tmp/overo-nano.img,if=sd,cache=writeback You can also watch the installation in the video below: Source: https://wiki.linaro.org/Resources/HowTo/Qemu-5 Jean-Luc Aufranc (CNXSoft)Jean-Luc started CNX Software in 2010 as a part-time endeavor, before quitting his job as a software engineering manager, and starting to write daily news, and reviews full time later in 2011. www.cnx-software.com

September 20, 2011September 20, 2011 by Jean-Luc Aufranc (CNXSoft) - 4 Comments

First ARM-Based Arduino Board with Atmel SAM3U

Arduino announced Arduino Due board with a 32bit Cortex-M3 ARM processor on their blog before Maker Faire. The SAM3U processor from ATMEL runs at 96MHz with 256Kb of Flash, 50Kb of SRAM, 5 SPI buses, 2 I2C interfaces, 5 UARTS, 16 Analog Inputs at 12Bit resolution and more. Contrary to previous hardware release, they intend to open the process to the community early on and they plan to to be demo the board and give away some boards to a selected group of developers who will be invited to shape the platform while it’s been created. After Maker Faire, a small batch of Developer Edition boards on the Arduino store will be sold to members of the community who want to join the development effort. The final board will be released by the end of 2011. If you can’t wait there are some other Arduino-like projects with Cortex-M3 support based […]

September 20, 2011February 22, 2015 by Jean-Luc Aufranc (CNXSoft) - No Comments

Texas Instruments AM387X Sitara ARM Cortex A8 Microprocessors

Texas Instruments (TI) has introduced three new AM387x ARM Cortex-A8 microprocessors (MPUs): AM3871, AM3872 and AM3874. TI says these MPUs offer integration of the ARM Cortex-A8 core, peripherals for high-bandwidth connectivity (SATA, D-CAN, PCI Express (PCIe), Gigabit Ethernet switch and more), 3D graphics for enhanced GUIs and display subsystems for camera connectivity and viewing. The AM387x ARM Cortex-A8 MPU can connect to and control IP and CAN networks, HD displays, keyboard, mouse, PC, SD card and various general purpose peripherals, all via one highly integrated processor in an industrial automation application controlling a production line and a high-speed, shared data bus allows for reduced communication overhead and quick access to shared data, which results in reduced chip count, discrete memory costs and printed circuit board (PCB) space compared to separate solutions. Those MPUs are targeted at a variety of fanless applications such as: single board computing, network and communications processing, […]

September 15, 2011February 22, 2015 by Jean-Luc Aufranc (CNXSoft) - No Comments

Window 8 ARM Platforms at Build Conference 2011

Yesterday, I mentioned the Nvidia Tegra 3 tablet running Windows 8 which is currently showcased at Build Conference 2011 and they also had a Tegra 3 laptop running Windows 8. But Nvidia was not the only company showing off ARM based processors running Windows 8. There were at least 2 other companies, namely Qualcomm and Texas Instruments. Qualcomm showcased a Snapdragon MSM8660 (Dual core 1.2 GHz) Tablet running Windows 8 and announced that the first batch of Windows 8 PC will be based on the Snapdragon processor. Texas Instruments brought a Windows 8 Tablet based on OMAP4430 (dual core 1 GHz) developed in partnership with Quanta. Jean-Luc Aufranc (CNXSoft)Jean-Luc started CNX Software in 2010 as a part-time endeavor, before quitting his job as a software engineering manager, and starting to write daily news, and reviews full time later in 2011. www.cnx-software.com

September 14, 2011September 14, 2011 by Jean-Luc Aufranc (CNXSoft) - No Comments

Intel and Google to work on Android for Atom

Intel officially announced it will collaborate with Google to optimize the Android OS for Intel’s Atom processor platform in order to help Intel entering the smartphone market. In his keynote on the 13th of September – the first day of the Intel Developer Forum 2011 – Intel CEO Paul Otellini announced the partnership with Google to support Android on Atom processors and said the first Intel-based smartphones will be available in the first half of 2012. Paul Otellini demoed Intel’s Android smartphone reference platform running Android 2.3 (Gingerbread). The phone is 9.5mm thick, had an HDMI output, NFC support and features Intel’s 32nm Medfield processor which is said to include a newer generation GPU. Intel also showed off the new ISP (Image Signal Processor) capabilities in Medfield which is capable of capturing up to 20 fps at 1600 x 1200. However, the reference platform could only deliver 10 fps from […]

September 14, 2011 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

Microsoft demoes Windows 8 on Tegra 3 Tablet

Microsoft demonstrated several Windows 8 features running on a quad-core NVIDIA Tegra 3 tablet at the company’s BUILD developer conference in Anaheim, California. During the event, Mike Angulio – Microsoft’s VP of Windows planning – demonstrated: Windows 8 devices’ ability to instantly switch on and off The new Windows 8 user interface, designed to work equally well with both touch-based tablets and keyboard/mouse-based PCs New applications, mostly written in HTML5, which are always running in the background Platform agnostic applications (running on both ARM and x86) Anguilo also emphasized that all Windows 8 applications will feature hardware accelerated graphics so that developers will not need to do additional work to support hardware acceleration and their applications will automatically take advantage of graphics on both ARM and x86 platforms. Source: Microsoft Wows BUILD Crowd with Windows 8 on Quad-Core NVIDIA Tegra Tablet You can watch Windows 8 Demo from Build Conference […]

September 14, 2011September 14, 2011 by Jean-Luc Aufranc (CNXSoft) - No Comments

Sony Announced the Android Walkman NW-Z1000

Sony Corp announced three new series of its Walkman portable music including the “NW-Z1000” series powered by Nvidia Tegra 2, equipped with an 4.3-inch TFT LCD panel and running Android 2.3 (gingerbread). NW-Z1000 user interface is slightly customized and its sound quality is improved thanks to a digital amplifier chip called “S-Master MX.” The changes made to the UI include shortcut icons for Sony’s music applications and video players at the bottom of the screen. The NW-Z1000 has wireless LAN capability, GPS and sensors such as acceleration sensor and is pre-installed with GMS (Google Mobile Service) which includes Google Maps, YouTube and Android Market. Here are the specifications of the NW-Z1000 series Walkmans: Android 2.3 with access to the Google market YouTube, Gmail, Google Maps and various Sony apps pre-installed (Sony Music Player, Photo Player, etc.) 4.3-inch LCD with 480×800 resolution NVIDIA Tegra 2 dual core mobile CPU (1GHz) 512MB main […]

September 14, 2011September 14, 2011 by Jean-Luc Aufranc (CNXSoft) - No Comments

Ziilabs Unveils Low Cost Jaguar3 Android Tablet Reference Designs

Earlier this May, Ziilabs announced the ZMS-20 dual core processors targeted at Android Honeycomb tablets. They have now unveil the 3rd generation of Android Tablet reference designs based on ZMS-20 and ZMS-40 called Jaguar3. Here’s an excerpt of the press release: ZiiLABS, a pioneering media processor and platforms company (a wholly-owned subsidiary of Creative Technology Ltd), today introduced its JAGUAR3, the most powerful 3rd Generation Android 3.2 tablet series. JAGUAR3 is a series of ultra-slim, ultra-lightweight and stylish 10.1” tablet reference designs targeted at the OEM markets. With over a decade of designing experience in portable mobile devices, Creative provided the ergonomic and sexy design of this series of JAGUAR3 tablets. ZMS-20 StemCell Processors JAGUAR3’s superior performance, low power consumption and rich feature set comes from the dual-core 1.5GHz ARM Cortex-A9 based ZMS-20 StemCell Processors. ZMS-20 has another 48 StemCell Processing cores within, which effectively make it into a 50-core processor. […]