ZiiLABS ZMS Category - CNX Software - Embedded Systems News

May 1, 2012May 1, 2012 by Jean-Luc Aufranc (CNXSoft) - 7 Comments

Ziilabs ZMS-40 Decodes 6 HD Videos and Maps them to 3D Objects Simultaneously!

Ziilabs uploaded an impressive video that shows the Ziilabs ZMS-40 simultaneously decoding 6 High Definition Videos (although they don’t say if it’s 720p or 1080p) with 5 H.264 videos and 1 VP8/WebM video and rendering them on 3D objects via OpenGL ES. That’s quite amazing, but the next question could be why would you need that much processing power in a chip aimed at tablets? Augmented reality perhaps… Jean-Luc Aufranc (CNXSoft)Jean-Luc started CNX Software in 2010 as a part-time endeavor, before quitting his job as a software engineering manager, and starting to write daily news, and reviews full time later in 2011. www.cnx-software.com

April 17, 2012April 17, 2012 by Jean-Luc Aufranc (CNXSoft) - 8 Comments

Ziilabs MandelMark Benchmark Shows ZMS-40 GPU Compute Performance is 18 Times Faster than Nvidia Tegra 3

Ziilabs released comparative GPU compute benchmark results for its ZMS-40 stem cells processor and made available its MandelMark floating point benchmark for Android 4.0 as an apk file. Since Ziilabs is using its own benchmark tool, which they released as a binary but did not open source, the results should be taken with a grain of salt. GPU Compute (aka GPGPU – General Purpose computing on GPU) is a technique to use the GPU to perform complex calculations usually performed by the CPU. MandelMark benchmark visualizes the solutions to the Mandelbrot to measure the floating point performance of mobile processors. Ziilabs compared their ZMS-40 Quad Core Cortex A9 processor with 96 stemcell cores to the following competitors: IPAD 3 – Apple A5X processor with a quad-core PowerVR SGX543MP4 GPU Galaxy Tab 7+ – Samsung Exynos 4210 processor with a quad-core ARM Mali-400 GPU Galaxy Nexus – TI OMAP 4460 processor […]

February 15, 2012 by Jean-Luc Aufranc (CNXSoft) - No Comments

Ziilabs Unveils HanZpad Android 4.0 Tablet Reference Design

ZiiLABS, a subsidiary of Creative Technology, has announced the HanZpad platform, a tablet reference design based on ZiiLABS ZMS-40 StemCell Media Processor (4 ARM Cortex A9 cores and 96 GPU cores) optimized for Android 4.x (ICS) and a Chinese operating system. The HanZpad platform is built around Ziilabs ZMS-40 processors with four 1.5GHz ARM Cortex-A9 CPUs and 96-core for the GPU. The ZMS-40 SoC supports H.264 HP decoding of up to 3840×1080 for true 1080p 3D stereo, and 2560×1600 (WQXGA) display resolution support. The firmware can also be upgraded to support for High Efficiency Video Coding (HEVC) aka H.265 which can increase data compression ratio by up to 2 times compared to H.264. Beyond the ZMS-40 processor, the key features of the tablet are as follows: 10.1-inch, 1,280 x 800-pixels IPS panel 1GB memory micro SDHC slot (up to 64GB) Wi-Fi and Bluetooth connectivity 22-hour battery life (~1W power consumption) […]

January 5, 2012January 9, 2012 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

Ziilabs ZMS-40 Quad Core Cortex A9 SoC is now Available

Ziilabs has just announced the availability of its 100-core ZMS-40 StemCell Media processor optimized for Android tablets. The ZMS-40 combines 96 of ZiiLABS’ StemCell media processing cores with four 1.5GHz ARM Cortex-A9 CPUs. The number of StemCell Media processors has doubled compared to the dual core ZMS-20. Ziilabs’ own GPU benchmark called MandelMark shows a 2X increase in performance or a 50% reduction in power consumption. The benchmark is not yet available for download, but the company plans to release it in Q1 2012 as an apk file. This processor competes directly with the Nvidia Tegra 3 in terms of CPU and GPU performance. It may actually beat it, as it can support dual independent displays (see below for details). Here are ZMS-40 Key Features: Quad 1.5GHz ARM Cortex-A9 cores with Neon ZiiLABS flexible Stemcell media processing capabilities Low-energy SIMD architecture for high performance media acceleration 96x 32-bit floating point […]

December 2, 2011 by Jean-Luc Aufranc (CNXSoft) - No Comments

Android 4.0 Demo on Ziilabs Jaguar Tablet Reference Design

Yet another Android 4.0 demo on a development platform. This time, Android 4.0.1 runs on a Jaguar Tablet powered by Ziilabs ZMS-20 ARM Cortex A9 processor. It runs pretty smoothly. Jean-Luc Aufranc (CNXSoft)Jean-Luc started CNX Software in 2010 as a part-time endeavor, before quitting his job as a software engineering manager, and starting to write daily news, and reviews full time later in 2011. www.cnx-software.com

September 14, 2011September 14, 2011 by Jean-Luc Aufranc (CNXSoft) - No Comments

Ziilabs Unveils Low Cost Jaguar3 Android Tablet Reference Designs

Earlier this May, Ziilabs announced the ZMS-20 dual core processors targeted at Android Honeycomb tablets. They have now unveil the 3rd generation of Android Tablet reference designs based on ZMS-20 and ZMS-40 called Jaguar3. Here’s an excerpt of the press release: ZiiLABS, a pioneering media processor and platforms company (a wholly-owned subsidiary of Creative Technology Ltd), today introduced its JAGUAR3, the most powerful 3rd Generation Android 3.2 tablet series. JAGUAR3 is a series of ultra-slim, ultra-lightweight and stylish 10.1” tablet reference designs targeted at the OEM markets. With over a decade of designing experience in portable mobile devices, Creative provided the ergonomic and sexy design of this series of JAGUAR3 tablets. ZMS-20 StemCell Processors JAGUAR3’s superior performance, low power consumption and rich feature set comes from the dual-core 1.5GHz ARM Cortex-A9 based ZMS-20 StemCell Processors. ZMS-20 has another 48 StemCell Processing cores within, which effectively make it into a 50-core processor. […]

May 12, 2011May 12, 2011 by Jean-Luc Aufranc (CNXSoft) - No Comments

Ziilabs announced the ZMS-20 aimed at Android 3.0 Tablets

Here’s how Ziilabs describes their new dual core processor aimed at tablets running Android honeycomb: The ZMS-20 has been engineered for high-resolution tablet computing and combines ZiiLABS’ StemCell media processing array with dual 1.5GHz ARM Cortex-A9 MPCore processors (with Neon) to deliver stunning 1080p high profile video playback, immersive OpenGL ES 2.0 3D graphics, HD video calling and a rich desktop browsing experience including Adobe Flash Player. With multi-core application acceleration and dynamic power management for longer battery life the ZMS-20 delivers the efficient, high-performance platform required for the next generation of devices, including Android 3.0 based tablets. ZMS-20 Key Features: Dual 1.5GHz ARM Cortex A9 cores with Neon ZiiLABS flexible Stemcell media processing capabilities Low-energy SIMD architecture for high performance media acceleration 48 x 32-bit floating point media processing cores for 26GFlops of compute High Profile H.264 video playback at 1080p@30fps Wide range of accelerated video codecs including H.264, […]

February 9, 2011February 9, 2011 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

Ziilabs ZMS-05 and ZMS-08 SDK and Development Boards

Ziilabs (originally 3DLABS) is Singapore company, subsidiary of Creative Technology, that provides media application processors for consumers electronics and has offices in the UK, China, USA and Singapore. Ziilabs Media Processors Overview Ziilabs has two media processors: ZMS-05 – A Low Power HD Programmable Media Rich Processor based on two ARM9 core (ARM9-EJS) mainly aimed at smartphones and tablets with the following media capabilities: High compute density SIMD architecture High resolution – decode to 1080p / 720p encode Simultaneous video encode/decode at D1 Wide rage of optimised CODECs and APIs Accelerated OpenGL ES 3D graphics Hardware compositing Advanced image processing 8 GFlops programmable compute ZMS-08 – A HD Media Rich Applications Processor based on an ARM Cortex A8 running @ 1GHz mainly aimed at media players, set-top boxes and digital signage solutions with the following media capabilities: Blu-ray Quality 1080p H.264 Video Decode 1080p H.264 Video Encode 720p H.264 Video […]