hmi News - Page 3 of 16 - CNX Software - Embedded Systems News

hmi

Posted on by Jean-Luc Aufranc (CNXSoft) - No Comments on SECO Pi Vision 10.1 CM5 – An IP66-rated, 10.1-inch HMI solution based on Raspberry Pi Compute Module 5

SECO Pi Vision 10.1 CM5 – An IP66-rated, 10.1-inch HMI solution based on Raspberry Pi Compute Module 5

SECO Pi Vision 10.1 CM5

SECO Pi Vision 10.1 CM5 is an industrial-grade, IP66-rated Human-Machine Interface (HMI) solution powered by the Raspberry Pi Compute Module 5. It also features the Raspberry Pi CM5 IO board and a 10.1-inch multi-touch display with 1280×800 resolution. Since it’s based on the official IO board, it exposes two HDMI video outputs, a Gigabit Ethernet RJ45 jack, and two USB 3.0 ports. It also features an internal M.2 M-Key socket for storage expansion or an AI accelerator, and a 40-pin Raspberry Pi GPIO header. Pi Vision 10.1 CM5 specifications: SoM – Raspberry Pi CM5 SoC – Broadcom BCM2712 CPU – Quad-core 64-bit Arm Cortex-A76 processor @ 2.4GHz GPU – VideoCore V3D VII GPU 800 MHz System Memory – Up to 8GB LPDDR4-4267 SDRAM with ECC Storage – Up to 64GB eMMC flash Wireless – 2.4 GHz/5.0 GHz IEEE 802.11 b/g/n/ac WiFi 5 and Bluetooth 5.0 LE Storage MicroSD card socket […]

Posted on by Debashis Das - No Comments on Allwinner T153-based industrial SoM and SBC feature a mix of Arm Cortex-A7 and RISC-V cores

Allwinner T153-based industrial SoM and SBC feature a mix of Arm Cortex-A7 and RISC-V cores

Forlinx FET153 S Allwinner T153 System on Module

Forlinx has recently introduced the Allwinner T153-based FET153-S SoM and the OK153-S SBC. The Allwinner T153 processor features a hybrid architecture that combines a quad-core Arm Cortex-A7 CPU with an XuanTie E907 RISC-V core. The board features up to 1GB DDR3 RAM, 8GB eMMC, triple Gigabit Ethernet, dual CAN-FD, RS-485, and a Local Bus for PSRAM or FPGA expansion. Display options include support for RGB, LVDS, and MIPI DSI interfaces, and camera inputs are offered via parallel or MIPI CSI. Additional I/O include multiple UART, I²C, SPI, I²S, GPADC, and GPIO options, along with Wi-Fi/Bluetooth, a USB Type-C OTG port, and a Mini PCIe socket for 4G modules. Target applications include real-time control and edge computing, industrial automation, IoT gateways, and embedded systems. Forlinx FET153-S system-on-module Specifications: SoC – Allwinner T153 CPU 4x Arm Cortex-A7 cores @ up to 1.6GHz XuanTie E907 RISC-V core @ up to 600MHz GPU – 2D […]

Posted on by Debashis Das - 1 Comment on ARIES MSRZG3E OSM-compliant SiP with Renesas RZ/G3E MPU targets industrial HMI and Edge AI

ARIES MSRZG3E OSM-compliant SiP with Renesas RZ/G3E MPU targets industrial HMI and Edge AI

ARIES Embedded MSRZG3E OSM compliant SiP

ARIES Embedded MSRZG3E is an OSM-compliant system-in-package (SiP) built around the Renesas RZ/G3E MPU, designed for HMI, industrial, medical, and edge AI applications. The Renesas RZ/G3E SoC integrates a quad-core Arm Cortex-A55 CPU, a Cortex-M33 real-time core, and an Ethos-U55 NPU delivering up to 512 GOPS for AI power. Other features include PCIe Gen3, USB 3.2, dual Gigabit LAN, plus CAN FD, UART, I2C, SPI, and ADC. Multimedia support includes dual displays, MIPI-CSI camera input, and H.264/H.265 video codec. The SiP ships with 512 MB to 8 GB LPDDR4 RAM and 4 GB to 64 GB eMMC flash, with commercial and industrial-grade temperature support. MSRZG3E MSRZG3E SiP specifications: SoC – Renesas RZ/G3E dual or quad Arm Cortex-A55, Arm Cortex-M33 core MCU Memory – 512 MB to 8 GB LPDDR4 RAM Storage 4 GB to 64 GB eMMC NAND flash 2 Mbit to 512 Mbit SPI NOR flash 476-pad land grid […]

Posted on by Debashis Das - 2 Comments on BIOSTAR MU-N150 – A Twin Lake fanless Industrial PC with 2.5GbE, triple 4K video output

BIOSTAR MU-N150 – A Twin Lake fanless Industrial PC with 2.5GbE, triple 4K video output

BIOSTAR EdgeComp MU N150 fanless industrial PC

BIOSTAR has launched the EdgeComp MU-N150, a compact 0.6L fanless industrial PC built around the Intel Processor N150 ” Twin Lake” SoC for edge computing, automation, HMI, POS/kiosk, and more. Some other N150 systems, like the HUNSN RJ42/RJ43 and Protectli VP2430, are for networking with four 2.5GbE ports, while the MU-N150 uses dual LAN but adds industrial-grade durability. The PC supports up to 16GB DDR5 4800MHz memory, triple 4K video output, and dual 2.5GbE. Expansion option includes M.2 Key-M slot for NVMe storage and an M.2 Key-E slot for Wi-Fi/BT modules. Other features include 2x USB 3.2, 2x USB 2.0, an RS232 COM port, an audio jack, and an input voltage range of 12–19V DC. It’s fanless, ventless, and compatible with various operating systems for industrial and commercial applications. BIOSTAR EdgeComp MU-N150 specifications: SoC – Intel Processor N150 quad-core “Twin Lake” processor @ up to 3.6 GHz (Turbo) with 6MB cache, […]

Posted on by Debashis Das - 2 Comments on Elecrow ESP32-S3 rotary displays combine round IPS touchscreen, knob, and press input

Elecrow ESP32-S3 rotary displays combine round IPS touchscreen, knob, and press input

CrowPanel 1.28 inch and 2.1 inch ESP32 S3 Rotary Display

Elecrow has added two new ESP32-S3-powered rotary displays to its CrowPanel Advance lineup, which come in 1.28-inch (240×240) and 2.1-inch (480×480) sizes, and feature a round IPS screen with rotary, touch, and press input. Both rotary displays feature IPS capacitive touchscreens, rotary input with a smooth feel, knob-press operation, ambient lighting, USB-C (5V) power, and expansion capabilities via UART, I²C, and FPC connectors. These features make them suitable for DIY projects, IoT prototypes, and embedded product development across various applications, including smart home appliances, industrial control, and UI training scenarios. Elecrow CrowPanel 1.28-inch and 2.1-inch rotary display specifications: SoC – Espressif Systems ESP32-S3R8 CPU – Dual-core Xtensa LX7 processor @ up to 240 MHz Memory – 512 KB SRAM, 8 MB PSRAM Wireless Wi-Fi 4 (802.11 b/g/n, 2.4 GHz) Bluetooth 5.0 LE Storage – 16 MB flash Display Two options 1.28-inch IPS touchscreen, 240 × 240 resolution 2.1-inch IPS touchscreen, […]

Posted on by Debashis Das - 1 Comment on ESP32-S3 wide touch display development board features a 640×172 touch LCD, AI voice support

ESP32-S3 wide touch display development board features a 640×172 touch LCD, AI voice support

ESP32 S3 3.49inch Touch LCD Development Board

Waveshare has recently introduced ESP32-S3-Touch-LCD-3.49, an ESP32-S3-based wide touch display (640×172) development board for HMI and AI voice applications such as handhelds, smart panels, meters, kiosks, and small IoT dashboards. The device comes in two variants, where Case A supports a single 18650 lithium battery and Case B is designed for a 3.7V Li-Po battery. Both models integrate Wi-Fi and Bluetooth connectivity, dual microphones with echo cancellation, speaker output, IMU, RTC, microSD card for storage, USB-C for power and programming, and there are also expansion pads for interactive touch, audio, and sensor-based applications. Waveshare ESP32-S3-Touch-LCD-3.49 specifications: Wireless MCU – Espressif Systems ESP32-S3R8 CPU – Dual-core Tensilica LX7 @ up to 240 MHz with vector instructions for AI acceleration. Memory – 512KB RAM, 8MB PSRAM ROM – 384KB Connectivity – 2.4 GHz WiFi 4 and Bluetooth 5.0 LE with support for long-range, up to 2 Mbps data rate, mesh network. Storage […]

Posted on by Debashis Das - No Comments on Renesas RL78/L23 16-bit MCU features segment LCD interface, SMS for low-power HMI systems

Renesas RL78/L23 16-bit MCU features segment LCD interface, SMS for low-power HMI systems

Renesas ultra Low Power RL78L23 MCU

Renesas’ RL78/L23 is a low-power 16-bit MCU with built-in segment LCD, capacitive touch, dual-bank flash for FOTA, and a wide 1.6–5.5 V operating voltage range. It targets HMI appliances, metering, and low-cost IoT products with support up to 2037. Key features include up to 512 KB dual-bank flash, 32 KB SRAM, 8 KB data flash, with ~1 µs wake-up, and SMS (Snooze Mode Sequencer) to run LCD/touch tasks without waking the CPU. It integrates a segment LCD controller with a new VL4 reference mode that cuts LCD current by ~30% compared to the RL78/L1x. Connectivity and sensing options include UART/I²C/CSI, a temperature sensor, and an internal oscillator. With an industrial operating temperature range and a wide supply range, this MCU is suitable for induction cooktops, HVAC panels, utility meters, and battery-powered HMI devices. Renesas RL78/L23 MCU Specifications: CPU core – Renesas RL78 16-bit CISC core, 3-stage pipeline, 0.03125 µs/instruction at […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 12 Comments on reTerminal E1001/E1002 – ESP32-S3-powered monochrome/color ePaper displays for dashboards, digital signage

reTerminal E1001/E1002 – ESP32-S3-powered monochrome/color ePaper displays for dashboards, digital signage

reTerminal E1002 7.3-inch color ePaper display

Seeed Studio’s reTerminal E1001 and E1002 are two ePaper displays featuring an ESP32-S3 WiFi and Bluetooth LE wireless microcontroller suitable for dashboards or digital signage applications. The only difference between the two reTerminal E-series displays is that the E1001 features a 7.5-inch monochrome display, while the E1002 integrates a 7.3-inch 6-color ePaper display. Both come with a 2,000 mAh battery offering up to 3 months of battery life, a 32MB SPI flash, a microSD card slot, a microphone and a buzzer, temperature and humidity sensors, an 8-pin GPIO header, and a few buttons and LEDs. reTerminal E1001/E1002 specifications: Wireless SoC – Espressif Systems ESP32-S3 dual-core microcontroller with 8MB PSRAM Storage 32MB SPI flash MicroSD card slot up to 32GB (FAT32 file system only) Display E1001 – 7.5-inch Monochrome ePaper display with 800×480 resolution E1002 – 7.3-inch “Full Color” (i.e., 6-color) ePaper display with 800×480 resolution Audio Microphone (3) for voice […]