industrial News - Page 4 of 112 - CNX Software

September 5, 2025 by Debashis Das - 5 Comments

Radxa CM4 – A Raspberry Pi CM4 replacement with Rockchip RK3576 Edge AI SoC, up to 16GB RAM

The Radxa CM4 is a Raspberry Pi CM4-like compute module built around the Rockchip RK3576(J) octa-core Cortex-A72/A53 SoC and designed for Edge AI and multimedia applications. The SoC is suitable for Edge AI applications with a 6 TOPS NPU, and the module supports up to 16GB RAM. The system-on-module also features up to 256GB of onboard eMMC storage, a WiFi 6 and Bluetooth 5.4 module, and a Gigabit Ethernet PHY. Besides the two 100-pin connectors found on the Raspberry Pi CM4, the Radxa module adds another one, for extra features like UFS 2.0, dual PCIe Gen2, SATA 3, DisplayPort, and more. It comes in commercial (0 – 60°C, RK3576) and industrial (-40 – 85°C, RK3576J) variants, and Radxa guarantees availability until 2035. Radxa CM4 Specifications SoC – Rockchip RK3576 or RK3576J (industrial-grade version) CPU – Octa-core CPU with 4x Cortex-A72 cores at 2.2 GHz, 4x Cortex-A53 cores at 2.0 GHz GPU – […]

September 1, 2025September 1, 2025 by Debashis Das - No Comments

Ambiq Apollo510B ultra-low-power Cortex-M55 Edge AI MCU adds Bluetooth LE 5.4

After the release of Apollo510, Ambiq has released Apollo510B, an ultra-low power Edge AI MCU that adds a 48 MHz network coprocessor for Bluetooth 5.4 LE (BLE) support. The new SoC combines Cortex-M55 with Helium MVE for AI/ML acceleration, secureSPOT 3.0 security, and graphiqSPOT 2.0 graphics for connected wearables, healthcare devices, and industrial IoT applications. The Apollo510B features 3.75MB of system RAM, 4MB of non-volatile memory, and a 12-bit ADC. It supports MIPI DSI and Quad SPI interfaces for displays, and offers audio capabilities such as always-on low-power ADC, a PDM stereo microphone interface, and dual multichannel I²S ports with asynchronous sample rate conversion. Peripheral options extend to USB 2.0 HS/FS, dual SDIO/eMMC controllers, multiple SPI and I²C masters, UART interfaces with flow control, and various GPIOs. Ambiq Apollo510B specifications: MCU Core Arm Cortex-M55 core at up to 250 MHz with Helium (MVE) vector instructions, FPU, TrustZone, MPU Caches/TCM – […]

September 1, 2025September 1, 2025 by Debashis Das - No Comments

AAEON MIX-MTLD1 – A industrial Meteor Lake-H/U Mini-ITX motherboard with OOB management

MIX MTLD1 Meteor Lake Mini ITX motherboard

AAEON MIX-MTLD1 is an industrial Mini-ITX motherboard supporting out-of-band (OOB) management and powered by an Intel Core Ultra Meteor Lake H/U processor (Intel Core Ultra 5 125H by default). The board supports up to 96 GB of DDR5-5600 memory, PCIe Gen 5 expansion, dual LAN, and various I/O options, including seven USB and four COM headers, and has a design fairly similar to the Jetway MTX-ARH1 released last week, with an Intel Core Ultra 5 125H or Core Ultra 7 155H SoC. What makes the MIX-MTLD1 different is the NCSI header for out-of-band (OOB) management using a MOD-RMB module, which links the Ethernet controller to a BMC for remote monitoring and control independently of the OS running on the CPU. This feature is common in servers, but more rare in industrial Mini-ITX boards, although we previously covered the DFI RPS101/RPS103 mini-ITX motherboards and HoneyComb Ryzen V3000 motherboard featuring OOB management […]

August 29, 2025August 29, 2025 by Debashis Das - No Comments

NXP MCX A34 mixed-signal Cortex-M33 MCU delivers 17x faster math acceleration for motor control and HVAC systems

NXP has launched the MCX A34 mixed-signal Arm Cortex-M33 industrial MCU, an upgrade of the MCX A14x and MCX A15x MCUs, which were introduced in 2024. While the A14x/A15x offered Cortex-M33 cores up to 96 MHz, 128 KB Flash, 32 KB SRAM, a 12-bit ADC, the A34 scales up with a 180 MHz core, up to 1 MB Flash, 256 KB SRAM, four 16-bit ADCs (3.2 Msps), four OpAmps, a 12-bit DAC, and FlexPWM with enhanced quadrature decoding. It also features a dedicated Math Acceleration Unit (MAU) that executes trigonometric, reciprocal, and square root operations up to 17x faster than CMSIS-DSP, a SmartDMA coprocessor for offloading data transfers, and advanced security features with tamper detection and secure boot. Connectivity is also richer, with up to six UARTs, four I²C, two SPI, and a CAN FD interface. MCX A34 specifications: MCU core – Arm Cortex-M33 core clocked at up to 180 […]

August 28, 2025August 28, 2025 by Jean-Luc Aufranc (CNXSoft) - No Comments

GIGAIPC 3.5-inch Intel Core Ultra Meteor Lake SBCs target smart parking, medical devices, and smart retail solutions

GIGAIPC QBiP-155UB QBiP-125UB 3.5-inch SBC

GIGAIPC QBiP-155UB and QBiP-125UB 3.5-inch Intel Core Ultra Meteor Lake SBCs are designed for power-constrained edge applications such as smart parking systems, precision medical devices, and intelligent retail solutions. They are powered by either an Intel Core Ultra 5 125H or Core Ultra 7 155H SoC, support up to 96GB DDR5, SATA and NVMe storage, three video interfaces through two HDMI ports and an LVDS connector, and feature two 2.5GbE ports, an M.2 E-Key socket for WiFi and Bluetooth, a mini PCIe socket for 4G LTE or 5G cellular connectivity, and a few USB and serial interfaces. GIGAIPC QBiP-155UB/QBiP-125UB specifications: Meteor Lake SoC (one or the other) Intel Core Ultra 5 125U 12-core/14-thread (2P+8E+2LPE) processor @ 1.3 / 4.3 GHz with 12MB cache, 4x Xe-core Intel graphics @ 1.85 GHz, Intel AI Boost NPU; PBP: 15W Intel Core Ultra 7 155U 12-core/14-thread (2P+8E+2LPE) processor @ 1.7 / 4.8 GHz with […]

August 28, 2025August 28, 2025 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

Octavo OSD62x-PM SiP combines Texas Instruments AM62x SoC with up to 2GB DDR4 in a tiny 14x9mm BGA package

Octavo OSD62x-PM System-in-Package (SiP) integrates Texas Instruments AM62x quad-core Cortex-A53 SoC, up to 2GB DDR4 memory, and required passive components into a tiny 14x9mm BGA package. It’s a smaller and cheaper version of the Octava OSD62x SiP (21x21mm) with AM62x SoC, DDR4, PMIC, EEPROM, and optional integrations. We noted both the OSD62x and OSD62x-PM in our previous article, but both are now available for purchase, and the OSD62-PM-BRK Evaluation Board is also ready to ship. Octavo OSD62x-PM specifications: SoC – Texas Instruments AM62x (AM623/AM625) CPU – Up to 4x Arm Cortex-A53 @ 1.4GHz MCU – Arm Cortex-M4F GPU – 3D graphics up to 2048×1080 @ 60 fps (AM625 only) Storage I/F – 1x eMMC, 2x SDIO, 1x GPMC Display I/F – 24-bit RGB MIPI DPI and OLDI/LVDS up to 1080p60 Camera I/F – 1x MIPI CSI-2 with DPHY 1.2 Networking – 2x 10/100/1000M Gigabit Ethernet with TSN support USB – […]

August 25, 2025August 26, 2025 by Jean-Luc Aufranc (CNXSoft) - 5 Comments

Forlinx FET3506J-C is an ultra-small (40 x 29mm) Rockchip RK3506J SoM with board-to-board connectors

Forlinx Embedded FET3506J-C is an ultra-small system-on-module (SoM) based on Rockchip RK3506J triple-core Cortex-A7 SoC measuring just 40 x 29mm, and equipped with up to 512MB DDR3, and 256MB NAND flash, or 8GB eMMC flash. I first thought I had already written about it, but the Forlinx FET3506J-S module introduced last March has a different design. It measures 44 x 35mm and exposes all I/Os through castellated holes, while the FET3506J-C features two 80-pin board-to-board (B2B) connectors instead. The company also provides the OK3506J-C single board computer for evaluation, but considering the module is inserted into the carrier board, as opposed to soldered, the carrier board could potentially be used with future modules using the same B2B connectors design. Forlinx FET3506J-C system-on-module Specifications: SoC – Rockchip RK3506J/B CPU 3x Arm Cortex-A7 core up to 1.5 GHz (RK3506J) or 1.6 GHz (RK3506B) Arm Cortex-M0 real-time core @ 200 MHz GPU – […]

August 25, 2025August 26, 2025 by Debashis Das - No Comments

Thin mini-ITX industrial motherboard features Intel Core Ultra 5 225H or Ultra 7 255H Arrow Lake-H SoC

Jetway MTX ARH1 Thin Mini ITX Industrial SBC

Jetway MTX-ARH1 is a thin Mini-ITX industrial motherboard powered by either an Intel Core Ultra 5 225H or Ultra 7 225H “Arrow Lake-H” SoC, and is a direct upgrade over the Meteor Lake-H-based MTX-MTH1. The new board also features faster 6400MHz DDR5 memory and conditional 8K display support. Other features mostly stay the same: up to 96GB DDR5 memory, quad display output, triple 2.5GbE networking via Intel I226 controllers, dual M.2 M-Key sockets, an M.2 B-Key with nano-SIM for 4G/5G, an M.2 E-Key with CNVi for WiFi/Bluetooth, plus a PCIe Gen5 x8 slot and SATA with RAID 0/1. There’s also support for watchdog timer, optional TPM 2.0, Realtek audio, USB 3.2 Gen2 and USB 2.0 (with headers), multiple COM ports, GPIO, I²C, and SMBus. These features make this board suitable for industrial PCs, edge AI, AIoT gateways, and multi-display systems. Jetway MTX-ARH1 specifications: Arrow Lake SoC (one or the other) […]