IMG CXM-2-64 CXM-4-64 CXM-4-128
Posted on

Imagination IMG CXM is a small GPU with HDR support for TV boxes, wearables, and Smart Home appliances

Imagination IMG CXM is a power-efficient embedded GPU family with HDR support user interfaces, thus enabling OEMs to provide users the enriching visual experience they have come to expect but at a lower cost and with more design flexibility. The new CXM GPUs also deliver close to 50% performance density improvement over IMG BXM consumer GPUs, offer support for 10-bit RGBA/YUV to deliver a HDR graphical user interface with less visible banding, and integrate well with Imagination RISC-V CPUs. Three CXM GPUs are available: The CXM-2-64 with 2 pixels per clock (PPC) and 64 FLOPS per clock is the smallest GPU with native support for HDR The CXM-4-64 with 4 pixels per clock (PPC) and 64 FLOPS per clock targets mainstream products The CXM-4-128 with 4 pixels per clock (PPC) and 128 FLOPS per clock targets is better suited to “premium DTV solutions” All share the following features: 10-bit RGBA/YUV […]

FireBeetle 2 ESP32-S3 camera board
Posted on

FireBeetle 2 ESP32-S3 camera board ships 16MB flash, 8MB PSRAM, PCB or external antenna

DFRobot “FireBeetle 2 ESP32-S3” is a 2MP camera board with ESP32-S3N16R8 dual-core WiFi and Bluetooth microcontroller fitted with 16MB flash and 8MB PSRAM, and offered in two versions: a more compact variant with a PCB antenna, and one with an external antenna offering a better signal quality. The FireBeetle 2 ESP32-S3 also features two rows of I/Os with GPIO, I2C, SPI, ADC, USB 2.0, etc…, a USB-C port for power and programming, a few buttons, and support for a LiPo battery through a 2-pin JST connector and a charging circuit. FireBeetle 2 ESP32-S3 specifications: ESP32-S3-WROOM-1 wireless module SoC –  ESP32-S3FN16R8 dual-core Tensilica LX7 microcontroller @ 240 MHz with 2.4 GHz 802.11n WiFI 4 and Bluetooth 5.0 LE connectivity Memory – 8MB PSRAM Storage – 16MB SPI flash Camera – Camera connector fitted with 2MP OV2640 camera with 68° FoV, up to 1600×1200 resolution Display – GDI connector for optional 1.54-inch, […]

ArmSoM RK3588 AIModule7 NVIDIA Jetson Nano-compatible SOM
8.8-inch information display HDMI USB touchscreen
Posted on

Ultrawide 8.8-inch HDMI and USB information display is offered with optional touchscreen support

Last year, I wrote about the Turing Smart Screen low-cost 3.5-inch display based on a WCH CH552T 8-bit E8051 core microcontroller that connects to a PC or other device through a USB Type-C cable in order to display system or other information using AIDA64 software or an open-source Python software. I’ve just come across another display that appears to serve the same purpose, except the “GeekTeches V35” is an ultrawide 8.8-inch display with 1920×480 resolution, micro USB and micro HDMI interfaces, and optional support for a touchscreen. GeekTeches V35 specifications: Display 8.8-inch IPS display with 480×1920 resolution (21:9 aspect ratio) with optional touch screen Pixel size –  0.114  x 0.114 mm Display area – 54.72 x 218.88 mm Wide display angle Brightness – 550cd/m2, adjustable Driver: IC/LCM Driver IC Display interface – “MIPI BIT interface”. Not sure what this is… a typo for MIPI DSI? Backlight current – 160ma Backlight […]

SparkFun Datalogger IoT - 9DoF
Posted on

SparkFun “Datalogger IoT – 9DoF” no code platform supports over 50 Qwiic sensor modules

SparkFun “DataLogger IoT – 9DOF” is an ESP32-based data logger board that transfers data to a microSD card or wirelessly to the cloud and comes with firmware that can automatically detect over 50 Qwiic modules without any programming required from the user making it a so-called “no code platform“. The board comes with a 9-axis IMU sensor + magnetometer, and two Qwiic connectors, and the data is stored in CSV or JSON formats on a microSD card or sent to IoT cloud platforms such as Amazon AWS IoT, Microsoft Azure, or Mathworks ThingSpeak using protocols like MQTT or HTTP. SparkFun “Datalogger IoT – 9DoF” specifications: Wireless module – ESP32-WROOM-32E: ESP32 dual-core microcontroller 4MB flash 2.4 GHz WiFi and Bluetooth LE connectivity, built-in PCB antenna Storage – MicroSD card slot Sensors 6-axis IMU accelerometer & gyro (ISM330DHCX) Magnetometer (MMC5983MA) 2x Qwicc I2C connectors for additional sensors USB – 1x USB Type-C […]

Sipeed Tang Nano 20K
Posted on

$25 Sipeed Tang Nano 20K FPGA board can simulate a RISC-V core, run Linux, retro games

The Sipeed Tang Nano 20K is a low-cost FPGA development board based on Gowin GW2AR-18 FPGA with 20,736 logic cells and 64Mbit RAM, which coupled with  64MBit QSPI flash provides enough resources to simulate a 32-bit RISC-V core booting Linux or playing retro games in an emulator. The FPGA board comes with a USB-C port for power and to load the FPGA bitstream through a BL616 microcontroller that also acts as a USB to serial chip, an HDMI port and an RGB LCD interface for video output, two user buttons, and two rows GPIOs to connect peripherals such as gamepads (through adapters). Sipeed Tang Nano 20K specifications: FPGA – Gowin GW2A-LV18QN88C8I7 with 20,736 logic units (LUT4) 15,552 flip-flops (FF) RAM 41,472 shadow SRAM (S-SRAM) 828K block SRAM (B-SRAM) Numbers of B-SRAM – 46 64Mbit 32-bit SDR SDRAM 48x 18×18 multipliers 2x PLLs 8x I/O Bank Onboard debugger – Bouffalo Labs […]

NXP S32K344 evaluation board
Posted on

NXP S32K344 evaluation board for mobile robots offers one 100BaseT1, six CAN-FD interfaces

MR-CANHUBK344 is an evaluation board based on NXP S32K344 Arm Cortex-M7 automotive general-purpose microcontroller designed for mobile robotics applications such as autonomous mobile robots (AMR) and automated guided vehicles (AGV) with a 100baseT1 Ethernet interface and six CAN-FD ports. The six CAN bus connectors come in three pairs of CAN-FD, CAN-SIC (signal improvement), and CAN-SCP (secure) interfaces using NXP chips. The board can notably be used for tunneling CAN over Ethernet using IEEE1722, plus the board is equipped with an SE050 Secure element with NFC for authentication, and various general-purpose peripheral interfaces via DroneCode standard JST-GH connectors. MR-CANHUBK344 evaluation board specifications: MCU – NXP S32K344 lockstep Cortex-M7 microcontroller @ up to 160 MHz with 4MB flash, 512KB SRAM, 6x CAN bus interfaces, up to 218 I/Os, AEC-Q100 compliant Ethernet – ASIL-B compliant 100BASE-T1 Ethernet PHY (TJA1103) 6x CAN-FD interfaces with 2x CAN Bus with flexible data rate through TJA144x automotive […]

Rockchip RK3568, RK3588 and Intel x86 SBCs and SoMs in 2025
Laird RM126x RM1261 RM1262
Posted on

Laird RM126x LoRaWAN modules and development kits feature Silicon Labs EFR32 MCU, support P2P communication

Laird Connectivity has launched the RM126x series of ultra-low power LoRaWAN modules with the RM1261 based on SX1261 RF transceiver compliant with regulations in Europe, UK, Taiwan, Japan, India, and other countries, and the RM1262 based on Semtech SX1262 for USA, Canada, Australia, New Zealand, etc… The RM126x modules partially achieve their low power consumption through the use of a Silicon Labs EFR32 series microcontroller, and should be integrated into products for industrial, agriculture and forestry, smart cities, utilities monitoring, transportation, logistics, supply chain, healthcare monitoring, and retail. Laird RM126x specifications: MCU – Silicon Labs EFR32 Arm Cortex-M33 microcontroller with 512KB flash, 32KB SRAM LoRa connectivity RF transceiver – Semtech SX1261 or SX1262 Data rates LoRa 125kHz LoRa 250kHz LoRa 500kHz FSK 50kbps (as per RP002-1.0.3 ) Frequency Range (1) – 863 MHz – 870 MHz Frequency Range 2 – 902 MHz – 928 MHz LoRa Version Class – Version […]

Renesas RA6M3 HMI development board
Posted on

$25 Renesas “HMI Board” features RA6M3 microcontroller for RT-Thread & LVGL development

The Renesas HMI board is a Renesas RA6M3 Cortex-M4F development board with a 4.3-inch LCD developed in collaboration with the teams behind the RT-Thread RTOS project and LVGL open-source graphics library. Besides a color display for HMI (Human Machine Interface), the board also features a microSD card for data storage, Ethernet and WiFi connectivity, Arduino headers and PMOD connectors for expansion, a microphone and a speaker, a CAN bus terminal block, and two USB-C ports for debugging and power. Renesas HMI board specifications: MCU – Renesas RA6M3 (R7FA6M3AH3CFB) Arm Cortex-M4F microcontroller @ 120MHz with 2MB Flash, 640KB RAM, TFT controller, 2D accelerator, and JPEG decoder. Storage – MicroSD card slot Display – 4.3-inch LCD (RGB 888) Audio – Microphone and speaker Networking Low-profile 10/100M Ethernet RJ45 port RW007 SPI WiFi module by Shanghai Ruiside Electronic Technology USB – 2x USB Type-C ports Serial – 2-pin CAN bus terminal block Expansion […]

Boardcon LGA3576 Rockchip RK3576 System-on-Module designed for AI and IoT applications