beagleboard

Posted on by Jean-Luc Aufranc (CNXSoft) - 4 Comments on BeagleY-AI SBC features TI AM67A vision processor with 4 TOPS AI accelerators

BeagleY-AI SBC features TI AM67A vision processor with 4 TOPS AI accelerators

Texas Instruments AM67A single board computer

The BeagleBoard.org Foundation’s BeagleY-AI is an open-source hardware, credit card-sized SBC powered by a Texas Instruments AM67A quad-core Cortex-A53 vision processor with various programmable blocks capable of delivering up to 4 TOPS for AI algorithms. The board ships with 4GB RAM, relies on a microSD card slot for storage and OS booting, implements gigabit Ethernet, WiFi 6, and Bluetooth 5.4 connectivity, and can drive up to three displays via micro HDMI, OLDI (LVDS), and MIPI DSI interfaces. The BeagleY-AI also comes with two MIPI CSI camera interfaces, four USB 3.0 ports, a USB Type-C port, and a 40-pin GPIO header for expansion. We can also see a 16-pin PCIe FPC connector that looks somewhat similar to the 20-pin PCIe connector on the Raspberry Pi 5 but officially supports PCIe Gen3 x1. BeagleY-AI specifications: SoC – Texas Instruments AM67A (J722S) “vision processor” CPU Quad-core 64-bit Arm Cortex-A53 processor at 1.4GHz Arm […]

Posted on by Jean-Luc Aufranc (CNXSoft) - No Comments on Linux 6.8 release – Notable changes, Arm, RISC-V, and MIPS architectures

Linux 6.8 release – Notable changes, Arm, RISC-V, and MIPS architectures

Linux 6.8 release

Linus Torvalds has just announced the release of Linux 6.8 on the Linux kernel mailing list: So it took a bit longer for the commit counts to come down this release than I tend to prefer, but a lot of that seemed to be about various selftest updates (networking in particular) rather than any actual real sign of problems. And the last two weeks have been pretty quiet, so I feel there’s no real reason to delay 6.8. We always have some straggling work, and we’ll end up having some of it pushed to stable rather than hold up the new code. Nothing worrisome enough to keep the regular release schedule from happening. As usual, the shortlog below is just for the last week since rc7, the overall changes in 6.8 are obviously much much bigger. This is not the historically big release that 6.7 was – we seem to […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 4 Comments on $150 BeagleV-Fire SBC features Microchip PolarFire RISC-V SoC FPGA, supports BeagleBone capes

$150 BeagleV-Fire SBC features Microchip PolarFire RISC-V SoC FPGA, supports BeagleBone capes

BeagleV-Fire SBC

BeagleV-Fire is a new single board computer powered by Microchip PolarFire MPFS025T penta-core RISC-V SoC FPGA that follows the BeagleBone Black form factor for compatibility with BeagleBone capes expansion boards. Microchip PolarFire RISC-V SoC FPGA was one of the first Linux-compatible RISC-V SoCs and was found in pricey boards such as the Icicle and TySOM-M-MPFS250 development boards. I also got an Icicle board for review, and while getting started with the Yocto Linux BSP was OK, I really struggled with the FPGA part including just installing Libero SoC in Ubuntu and going through the license, and even I gave up trying to run a bitstream sample on the board due to a lack of time. The BeagleV-Fire makes it much cheaper to try out the PolarFire and hopefully makes it easier to get started with both Linux and the FPGA fabric through easier-to-understand documentation and code samples. BeagleFire-V specifications: SoC […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 1 Comment on Alibaba T-Head TH1520 user manuals released

Alibaba T-Head TH1520 user manuals released

Alibaba T-Head TH1520 user manuals

Further Alibaba T-Head TH1520 quad-core RISC-V processor documentation has been released with nine user manuals covering video and audio processing, peripheral interfaces, memory interfaces, system registers, and the built-in NPU for video acceleration. We first noted the TH1520 RISC-V SoC in the expensive web3-focused ROMA laptop in October 2022, but since then there have been some very interesting developments with the release of Sipeed’s Lichee Pi 4A SBC and various other platforms based on the LM4A system-on-module plus the BeagleBoard.org’s BeagleV Ahead. Both boards also have preliminary support in mainline Linux with the Lichee Pi 4A making it to Linux 6.5, and the BeagleV Ahead was added to the just-released Linux 6.6 kernel. However I had not noticed documentation for the processor was not released publicly until now as both Sipeed and Beagleboard.org have now made available nine user manuals in English, and the Sipeed link has the Chinese versions […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 5 Comments on Linux 6.4 release – Main changes, Arm, RISC-V and MIPS architectures

Linux 6.4 release – Main changes, Arm, RISC-V and MIPS architectures

Linux 6.4 release

Linux 6.4 has just been released by Linus Torvalds on the Linux Kernel Mailing List (LKML): Hmm. Final week of 6.4 is done, and we’ve mainly got some netfilter fixes, some mm reverts, and a few tracing updates. There’s random small changes elsewhere: the usual architecture noise, a number of selftest updates, some filesystem fixes (btrfs, ksmb), etc. Most of the stuff in my mailbox the last week has been about upcoming things for 6.5, and I already have 15 pull requests pending. I appreciate all you proactive people. But that’s for tomorrow. Today we’re all busy build-testing the newest kernel release, and checking that it’s all good. Right? Released around two months ago, Linux 6.3 brought us AMD’s “automatic IBRS” Spectre defense mechanism, additional progress on the Rust front with User-mode Linux support (on x86-64 systems only), the NFS filesystem (both the client and server sides) gained support for […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 5 Comments on BeaglePlay – A $99 Texas Instruments AM625 industrial SBC with plenty of communication and expansion options

BeaglePlay – A $99 Texas Instruments AM625 industrial SBC with plenty of communication and expansion options

BeaglePlay

The BeagleBoard.org Foundation has just launched their latest single board computer with the BeaglePlay SBC powered by a Texas Instruments AM625 Cortex-A53/M4/R5 processor with 16GB eMMC flash, 2GB DDR2, and a wide range of I/Os, wired and wireless communication options, and support for expansion module compatible with MikroBus, Grove, and Qwiic connectors. Two wired Ethernet are offered, namely a typical Gigabit Ethernet RJ45 port, as well as a single-pair Ethernet RJ11 port limited to 10 Mbps but with a much longer range and power over data, and wireless connectivity includes dual-band WiFi 4, Bluetooth LE, and Sub-GHz. The board also features HDMI and MIPI DSI display interfaces and a MIPI CSI camera interface. BeaglePlay specifications: SoC – Texas Instruments Sitara AM625 (AM6254) with Quad-core 64-bit Arm Cortex-A53 processor @ 1.4 GHz Arm Cortex-M4F at up to 400 MHz Arm Cortex-R5F PowerVR Rogue 3D GPU supporting up to 2048×1080 @ 60fps, […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 13 Comments on BeagleV Starlight SBC won’t be mass manufactured, redesigned BeagleV RISC-V SBC expected in Q1 2022

BeagleV Starlight SBC won’t be mass manufactured, redesigned BeagleV RISC-V SBC expected in Q1 2022

BeagleV Starlight Not Manufactured

There was lots of excitement when BeagleV Starlight single board computer was announced in January of this year. With a price tag of $119 and up, it promises to be an affordable RISC-V SBC with StarFive JH7100 dual-core SiFive U74 Vision SoC with AI accelerator, H.265/H.264 hardware video decoding, up to 8GB RAM, HDMI output, Gigabit Ethernet, and so on. Several beta testers even received BeagleV Startlight prototypes, providing instructions for buildroot, boot Linux, or even a video review with Fedora.  The first version lacked a GPU, and the initial schedule planned for a new revision with an Imagination GPU to be manufactured in September. But there have been some changes, as BeagleV Starlight SBC will not go into mass production, but not all is lost, as the Foundation and Seeed Studio are working on a new BeagleV community board slated to be released in Q1 2022. Drew Fustini made […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 11 Comments on RISC-V International to give away 1,000 RISC-V development boards

RISC-V International to give away 1,000 RISC-V development boards

RISC-V development board giveaway

The best way for a new platform to get good software support is to bring hardware into the hands of developers. That’s exactly what RISC-V International is doing by inviting developers to sign up for a RISC-V developer board sponsored by RISC-V and contributing members. There are 1,000 boards on offer with 1GB to 16GB RAM depending on the target project from five companies and organizations namely Allwinner, Beagleboard.org, SiFive, Microchip Technology (previously Microsemi), and RIOS. Here are the stated goals of the giveaway: Spur innovation Enable new opportunities for the next generation of developers to work with the RISC-V ISA Provide a platform For testing To write programs that run on RISC-V Develop software Integrate existing software stacks Optimize ecosystem software Share feedback on the product such as ease to integrate software stacks, develop and test extensions, etc. The company did not provide an exact list of development board […]

Exit mobile version