Jean-Luc Aufranc (CNXSoft), Author at CNX Software - Embedded Systems News

March 12, 2014 by Jean-Luc Aufranc (CNXSoft) - No Comments

Kontron SMARC-sXBTi is a SMARC Module Powered by Intel Atom E3800 Series SoC

Kontrol has unveiled a computers-on-module based on the SMARC standard, previously ULP-COM, based on Intel Atom E3800 “Bay Trail-I” SoCs with up to 8GB LPDD3 memory, up to 64GB SSD, and support for various interface. After having released SMARC modules based on TI, Freescale and Nvidia last year, the company claims their SMARC-xXBTi is the first ever x86 CoM compatible with SMARC. SMARC-sXBT(i) specifications: SoC – Intel Atom E3800 “Bay Trail-I” with Intel Gen 7 Graphics System Memory – Up to 8GB DDR3L-1067/1333 (1.35V) with optional ECC Storage – 2-32 GB eMMC (SLC), 4-64GB for (MLC), 1x or 2x SATA 3Gb/s, 2x SDIO interfaces Display HDMI 1.4 up to 2560 x 1600 @ 60Hz 18/24-bit single channel LVDS up to 1366 x 768 (Optional eDP to have higher resolutions) Connectivity – Gigabit Ethernet (Intel Springville I210) USB – 1x USB 3.0 (via AFB), 2x USB 2.0, and optional USB OTG. […]

March 12, 2014June 24, 2014 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

$120 Raspberry Pi Bundle with LCD Display, Expansion Boards, Cables, and Accessories

Yesterday, Element14 has announced Wolfson Audio Card for the Raspberry Pi which adds multiple audio inputs and outputs to the low cost ARM Linux board, as it has been widely reported in the blogosphere. I’ve just mentioned it in case you missed it, as instead I’m going to write about a bundle with the Raspberry Pi Model B, lots of expansion boards, cables, and accessories such as a power supply, or a remote control that can be purchased for $120. It may not be useful if you only have a specific project in mind, but if you want to play around and interface with lots of different hardware, or even offer electronics lessons, it could be interesting. The complete kit includes: Raspberry Pi Model B with 512 MB RAM. Acrylic Case for RPi (not shown above) Expansions boards and modules: DVK511 Expansion Board with headers, jumpers, LEDs, and potentiometer 2.2″ […]

March 12, 2014 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

Qualcomm Snapdragon 800 & 801 SoCs Come in Six Flavors

Qualcomm usually does a poor job providing details about their SoC when they put out press releases or even in their website. It’s only thanks to a recent post on Anandtech that I’ve found out there are six different versions of Qualcomm Snapdragon 800 & 801. So two devices powered by Snapdragon 800 SoC may not have the same performance, although the differences are minor, I’d still consider this misleading. Snapdragon 801, for instance found in the Galaxy S5 (MSM8974AC), is just a revision (v3) from Snapdragon 800, so all 6 versions are MSM8974 processors, and the differences between models are modifications of the frequency for the CPU, GPU, ISP and memory interface, as well as the eMMC version (4.5 vs 5.0) and support for dual SIM (DSDA = Dual SIM Dual Active). All MSM8974 processors come with four Krait 400 CPU cores, an Adreno 330 GPU, dual ISP, a […]

March 12, 2014November 29, 2018 by Jean-Luc Aufranc (CNXSoft) - 11 Comments

Dedicated Hosting Services on ARM Development Boards (Cubieboard2, Raspberry Pi, ODROID…)

At least two companies have recently launched hosting services using dedicated ARM servers based on low cost development boards: NanoXion with its NX-BOX service powered by PiBox (Raspberry Pi) and CubieBox (Cubieboard 2) microservers, and miniNodes with servers based on Cubieboard2 first, then ODROID development boards, and possibly AllWinner OptimusBoard once/if it becomes available. The PiBox will feature a Raspberry Pi Model B with 512 MB RAM, and 16GB Class 10 UHS-1 microSD card by Samsung, and the dual core Cubiebox comes with 1GB RAM and a Crucial M500 SATA III 120GB SSD. Both NX-BOXes run Linux Debian Server NX distribution, support instant remote reboot, with guaranteed 10 Mbps connectivity for IPv4 & IPv6, and unlimited bandwidth. The boards are all hosted in France. The company expects their ARM servers to be used as private cloud servers, backup servers, private chat servers, web servers, mail servers, DNS Servers, monitoring servers, and […]

March 11, 2014May 29, 2017 by Jean-Luc Aufranc (CNXSoft) - 12 Comments

ITEAD Studio IBOX Powered by AllWinner A20 Features a 32-Pin Hacker-Friendly Connector (Crowdfunding)

ITEAD Studio IBOX is a mini computer powered by AllWinner A20 dual core Cortex A7 processor with 1GB RAM and 4GB Flash, a few USB connectors, Ethernet and video/audio connector. This mini pc can run both Android & Linux, and features a 32-pin connector that allows to connect expansion boards. Let’s have a look at the specifications: SoC- AllWinner A20 dual core ARM Cortex-A7 @ 1 GHz + ARM Mali 400 MP2 System Memory – 1GB DDR3 RAM Storage – 4GB NAND Flash + microsd slot Video Output – HDMI Audio Output – HDMI, optical S/PDIF Connectivity – 10/100M Ethernet USB – 3x USB 2.0 host port, 1x USB OTG port (full size) Expansion – 32-pin proprietary connector with TV OUT, USB, LCD, UART, IR, CSI, SPI, SATA, GPIOS and power signals. Misc – LED , IR sensor, and U-boot button (FEL mode?) Power – 5V/2A 9V/2A Dimensions – 145 x […]

March 11, 2014June 7, 2014 by Jean-Luc Aufranc (CNXSoft) - 3 Comments

Huawei Kirin 920 Octa-core big.LITTLE ARM SoC Benchmarked

Huawei / Hisilicon Kirin 920 application processor has yet to be formally announced, but in the last few days, more details have surfaced. Huawei SoC will feature an octa-core processor with four ARM Cortex A7 and four Cortex A15 cores in big.LITTLE configuration, together with a Mali-628MP4 GPU and a 4G LTE modem. There’s also Kirin 910 with 4 cores @ 1.6 to 1.8 GHz and Mali-450MP4 GPU. The big.LITTLE processor will support DDR3 memory up to 800 MHz, cameras up to 32MP, screens up to WQXGA resolution (2560×1600), and be manufactured using 28nm process technology. According to AndroidPC.es it should be found in Huawei Ascend D3 smartphone to be released this September. A device called HUAWEI H300 has shown up in Antutu showing a score 37,363 with Kirin 920 SoC, just a few points shy of the score for hardware powered by Snapdragon 805 (37,780) with four Krait 450 […]

March 11, 2014March 28, 2014 by Jean-Luc Aufranc (CNXSoft) - 9 Comments

Texas Instruments Tiva C Series TM4C1294 Connected Launchpad Sells for $20

There are now many ultra low cost MCU development kit selling for $15 to $25 such as STMicro Discovery Board, but for this price, they’ll usually just feature the MCU, a micro USB, pin header, maybe and maybe some sensors, and they usually lack any form of connectivity, at least without extra hardware. With Tiva C Series TM4C129 Connect Launchpad, Texas Instruments brings a board that can be used for IoT application out of the box thanks to the addition of an Ethernet port. The board sells for just $19.99, which means you could easily make something like a connected 4-relay control system for about $25. Connected LaunchPad evaluation kit specifications: MCU – Texas Instruents TM4C1294NCPDT ARM Cortex-M4 @ 120MHz with floating point, 1MB Flash, 256KB SRAM, 6KB EEPROM, Integrated 10/100 Ethernet MAC+PHY, data protection hardware, 8x 32-bit timers, dual 12-bit 2MSPS ADCs, motion control PWMs, USB H/D/O, and many […]

March 10, 2014March 10, 2014 by Jean-Luc Aufranc (CNXSoft) - 6 Comments

PC Engines APU System Boards Feature AMD G-Series T40E APU, 3 Gigabit Ethernet Ports

Up to now there were basically two embedded board based on x86 architecture available to hobbyists: Gizmo Board (AMD T40E) and Minnowboard (Intel Atom). There’s now another solution with PC Engines system boards, namely APU.1C and APU.1C4, that comes with AMD G-Series T40E dual core APU, 2 to 4 GB RAM, 3 Gigabit Ethernet ports, an mSATA connector, and more. Contrary to the other two boards however, there’s no video output, and that makes these APU boards suitable for routers, firewalls, VOIP, dedicated servers, special purpose network plumbing, etc.. PC Engines APU boards specifications: APU – AMD G -Series T40E dual core APU @ 1 GHz with 64 bit support, 32K data + 32K instruction + 512KB L2 cache per core, with Radeon HD6250 GPU. System Memory APU.1C – 2 GB DDR3-1066 DRAM APU.1C4 – 4 GB DDR3-1066 DRAM Storage – SD card (connected through USB), m-SATA, and one SATA […]