Jean-Luc Aufranc (CNXSoft), Author at CNX Software - Embedded Systems News

March 18, 2024March 18, 2024 by Jean-Luc Aufranc (CNXSoft) - No Comments

AAEON COM-RAPC6 and COM-ADNC6 COM Express modules feature Raptor Lake and Alder Lake-N CPUs

AAEON COM-ADNC6 Alder Lake-N COM Express module

AAEON has unveiled two COM Express Type 6 Compact Computer-on-Module families with the COM-RAPC6 designed for high performance with 13th generation Raptor Lake processors from the 15W Intel Processor U300E up to 45W Intel Core i7 SKUs, and the COM-ADNC6 optimized for efficiency with Alder Lake-N processors such as the Intel Core i3-N305 or Atom x7425E CPUs. COM-RAPC6 Raptor Lake COM Express CPU modules Specifications: 13th gen Raptor Lake SoC (one or the other) – Note frequencies shown as base frequencies Intel Core i7-13800HRE 14C/20T processor @ 2.5GHz with Intel Iris Xe Graphics; PBP: 45W Intel Core i7-13800HE 14C/20T processor @ 2.5GHz with Intel Iris Xe Graphics; PBP: 45W Intel Core i5-13600HE 12C/16T processor @ 2.7GHz with Intel UHD Graphics; PBP: 45W Intel Core i3-13300HE 8C/12T processor @ 2.1GHz with Intel UHD Graphics; PBP: 45W Intel Core i7-1370PE 14C/20T processor @ 1.9GHz with Intel UHD Graphics; PBP: 28W Intel Core […]

March 18, 2024March 17, 2024 by Jean-Luc Aufranc (CNXSoft) - 14 Comments

Some Raspberry Pi 5 boards can be overclocked up to 3.14 GHz (and run just fine)

The Raspberry Pi 5 is advertised as a single board computer with a CPU clocked up to 2.4 GHz, but some of the boards can run stably at a higher frequency, and Jeff Geerling found out one of his boards could be overclocked up to 3.14 GHz with no issues when running a stress test. The Raspberry Pi 5 already delivers a two to three-times jump in performance against the previous generation Raspberry Pi 4 SBC when clocked at 2.4 GHz, but some already overclocked their up to 3.0 GHz, and many thought it was the maximum limit. But a recent firmware release proved them wrong, as it turns out some Raspberry Pi 5 boards can boot at 3.2 GHz and run stably at 3.14 GHz with an adequate cooling solution. The voltage was also adjusted in the config.txt to more or less safe settings. Contrary to the photo above, […]

March 18, 2024March 17, 2024 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

Sipeed MaixBox M4N AI Box with 43.2 TOPS AXera AX650N SoC can decode/encode up to 32 videos

Sipeed MaixBox M4N is an AI box for video analytics and computer vision equipped with an AXera-Pi Pro (AX650N) octa-core Cortex-A55 SoC with a 43.2 TOPS (INT4) or 10.8 TOPS (INT8) AI accelerator and an H.265/H2.64 video encoder/decoder supporting up to 32 1080p30 videos. The AI box is based on the Sipeed Maix-IV motherboard, an upgrade to the Maix-III devkit with an AX620A quad-core Cortex-A7 SoC with a 14.4 TOPS AI accelerator (INT4). It comes with 8GB RAM shared for Linux and the AI accelerator, 32GB eMMC flash and an M.2 SATA socket for storage, two HDMI outputs, two gigabit Ethernet ports, optional WiFi or 4G LTE mini PCIe module, a few USB ports, and RS232 and RS485 interfaces. Sipeed MaixBox M4N specifications: SoC – AXera AX650N CPU – Octa-core Arm Cortex-A55 @ 1.7 GHz with NEON support NPU – 43.2 TOPS @ INT4, 10.8 TOPS @ INT8 with support […]

March 17, 2024March 17, 2024 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

7-inch Raspberry Pi CM4-based industrial HMI offers gigabit Ethernet, RS485 Modbus, digital and analog inputs

NORVI RPI-HMI is an industrial controller with a 7-inch touchscreen screen display powered by a Raspberry Pi CM4 and equipped with a range of interfaces including a gigabit Ethernet RJ45 port, a few USB ports, and several terminal blocks for RS485 (Modbus), digital and analog input, transistor outputs, and 24V DC power input. The new Raspberry Pi CM4-based HMI announcement follows the NORVI ESP32-HMI controller that was launched last December with an ESP32-S3 wireless microcontroller and a 5-inch LCD display with resistive touch. The NORVI RPI-HMI builds on that with a much faster Arm processor, a larger display with a capacitive touchscreen, gigabit Ethernet, and a wider range of I/Os that makes it suitable for various industrial HMI and PLC applications. NORVI RPI-HMI Industrial Controller specifications: SoM – Raspberry Pi CM4 SoC – Broadcom BCM2711 quad-core Cortex-A72 processor with VideoCore GPU System Memory – 1GB, 2GB, 4GB or 8GB LPDDR4-3200 […]

March 16, 2024March 16, 2024 by Jean-Luc Aufranc (CNXSoft) - 3 Comments

Firefly Core-3562JQ Rockchip RK3562J industrial SoM works in the -40 to +85°C temperature range

Firefly Core-3562JQ is a system-on-module based on Rockchip RK3562J SoC – the industrial-grade version of the Rockchip RK3562 quad-core Cortex-A53 Tablet SoC – designed to operate in the -40 to 85°C industrial temperature range and suitable for digital signage, industrial control systems, industrial PLCs, energy data concentrators, smart healthcare, self-service terminals, and more. The CPU module features up to 8GB RAM, 64GB flash, and a Rockchip RK809-5A PMIC, plus three 80-pin board-to-board connectors exposing video output and input interfaces, audio (SPDIF, PDM, I2S) interfaces, networking (GbE and Fast Ethernet), various USB interface, a 1-lane PCIe 2.1 interface, and more. Firefly Core-3562JQ specifications: SoC – Rockchip RK3562J CPU – Quad-core Arm Cortex-A53 processor @ up to 1.2 GHz (against 2.0 GHz for the Rockchip RK3562) GPU – Arm Mali-G52 EE with support for OpenGL ES 3.2, Vulkan 1.1, OpenCL 2.0 AI accelerator – None listed in the specs (Rockchip RK3562 comes […]

March 15, 2024 by Jean-Luc Aufranc (CNXSoft) - No Comments

Mekotronics D58 embedded computer features 6 HDMI outputs for video walls or mirrored displays

RK3588 embedded computer 6x HDMI video wall

Mekotronics D58 is a Rockchip RK3588 embedded computer running Android or Linux with six HDMI outputs for 4K video walls or multiple mirrored displays that should be mostly useful for digital signage applications. The system comes with up to 16GB RAM and 128GB eMMC flash, supports NVMe and SATA storage, comes with two GbE ports, WiFi 6 connectivity, optional 4G LTE and GNSS, one 4K-capable HDMI input port, four USB ports, some DB9 connectors for serial communication (RS232, RS485, TTL), and a terminal block with GPIOs and CAN bus. Mekotronics D58 specifications: SoC – Rockchip RK3588 octa-core processor with CPU – 4x Cortex‑A76 cores @ up to 2.4 GHz, 4x Cortex‑A55 core @ 1.8 GHz GPU – Arm Mali-G610 MP4 GPU with support for OpenGL ES 1.1/2.0/3.2, OpenCL 2.2, Vulkan 1.2 Video decoder – 8Kp60 H.265, VP9, AVS2, 8Kp30 H.264 AVC/MVC, 4Kp60 AV1, 1080p60 MPEG-2/-1, VC-1, VP8 Video encoder – […]

March 14, 2024March 14, 2024 by Jean-Luc Aufranc (CNXSoft) - 10 Comments

$35 SONOFF POW ring smart power meter (POWCT) safely supports up to 100A

SONOFF POW Ring smart power meter is the first CT clamp-based WiFi power meter from ITEAD. It is designed for installation in an electric cabinet to measure whole-house power consumption with up to 100A current. The power meter relies on an ESP32 microcontroller for control and wireless connectivity with a range of up to 130 meters thanks to an external high-gain antenna. It is supported by the usual eWelink mobile app that also enables integration with Google Home, Amazon Alexa, and IFTTT services, and ITEAD also mentions integration with the Home Assistant open-source framework. SONOFF POW Ring (POWCT) specifications: MCU – ESP32 WiFi and Bluetooth microcontroller Connectivity – 2.4 GHz WiFi 4 (802.11b/g/n) with SMA antenna connector for an external antenna to be placed outside of the electrical cabinet Current transformer (CT) interface type – RJ9 Current transformer detection range – 0 to 100A Measurement category – CAT II 0-100A […]

March 14, 2024 by Jean-Luc Aufranc (CNXSoft) - No Comments

The Lark Weather Station works with Arduino, ESP32, micro:bit, Raspberry Pi, and other boards

Lark Weather Station Arduino ESP32 Raspberry Pi

The Lark Weather Station measures wind speed, wind direction, temperature, humidity, and air pressure through a range of sensors and connects to popular development boards such as Arduino UNO, ESP32, BBC micro:bit, Raspberry Pi, or DFRobot Unihiker through I2C or UART. We’ve seen several projects for Internet-connection weather stations that retrieve weather data from the web and display the results locally, but the Lark Weather Station allows the users to get atmospheric data right in his/her current location thanks to its built-in anemometer, wind vane, and built-in sensors, as well as expansion interfaces for additional sensors. Lark Weather Station specifications: Storage – 16MB flash good to store about 160 days of data (when data is recorded once per minute) Sensors Compass Anemometer Wind Speed: 0.5~12m/s Cover to protect the anemometer during storage/transport Wind vane and wind direction shaft to report the wind direction (eight directions) Temperature Range –20~60℃ ±0.2℃ Humidity […]