Operating Systems Category - Page 1014 of 1033 - CNX Software

April 11, 2011April 11, 2011 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

Android to get 50% of smartphones market share by 2012

A Gartner’s study expects worldwide smartphone sales will reach 468 million units in 2011, a 57.7 percent increase from 2010. By the end of 2011, Android will move to become the most popular operating system (OS) worldwide and will build on its strength to account for 49 percent of the smartphone market by 2012 (Cf. Table 1). Sales of open OS (meaning with SDK, not necessarily open source) devices will account for 26 percent of all mobile handset device sales in 2011, and are expected to surpass the 1 billion mark by 2015, when they will account for 47 percent of the total mobile device market. Gartner also expects the price of Android to dramatically decrease by 2015 with 67 percent of all open OS devices with an average selling price of $300 or below. Here are the projection of smartphones sales by OS until 2015: OS 2010 2011 2012 […]

April 8, 2011July 17, 2012 by Jean-Luc Aufranc (CNXSoft) - No Comments

Video commemorating the 20th Anniversary of Linux

Linux is born in April 1991, with Linus Torvalds making it public with the following post on minix newsgroups: Hello everybody out there using minix – I’m doing a (free) operating system (just a hobby, won’t be big and professional like gnu) for 386(486) AT clones. … PS. Yes – it’s free of any minix code, and it has a multi-threaded fs. It is NOT protable (uses 386 task switching etc), and it probably never will support anything other than AT-harddisks, as that’s all I have :-(. Today, Linux is powering all kind of devices from supercomputer, stock exchange servers to smartphones, smart tv, cars and anything you can think of. Jean-Luc Aufranc (CNXSoft)Jean-Luc started CNX Software in 2010 as a part-time endeavor, before quitting his job as a software engineering manager, and starting to write daily news, and reviews full time later in 2011. www.cnx-software.com

April 7, 2011April 7, 2011 by Jean-Luc Aufranc (CNXSoft) - No Comments

Removing Old Kernels in Ubuntu with Synaptic

If you have used Ubuntu for a while and performed upgrades, you may have quite a few kernels in GNU GRUB as shown below: Those kernels are usually not necessary, they take space on your hard disk and make you scroll down in GRUB to access your other OS (if any). I’ll show how to only keep the last 2 kernels (for safety) in GRUB with Synaptic. First, start synaptic as a superuser: sudo synaptic Select “System Administration“, in type “linux-image” in the Quick search field and show the installed kernel (green tick box). Then select the kernels you want to remove (keep the last 2 versions), right-click and select “Mark for Removal”. Synaptic Package Manager window should look like the screenshot below: After that, simply click on Apply and within a short time (one minute in my case), the selected kernel are removed. Removing 4 kernels, freed 429 MB […]

April 6, 2011July 29, 2012 by Jean-Luc Aufranc (CNXSoft) - No Comments

Phytec Texas Instruments OMAP4430 Computer Module

Phytec announced the first system on module based on Texas Instruments OMAP4430. The phyCORE-OMAP4430 features up to 1GB LPDDR2 DRAM, 1GB NAND Flash, one USB Host, one USB OTG port, Ethernet, I2C Interface, DSI and HDMI video output and consumes a maximum of 3 Watts only. Here are the full specifications of the phyCORE-OMAP4430 computer module: Texas Instruments OMAP4430 @ 1GHz PowerVR SGX540 GPU 56 KB On-chip SRAM and 512 MB (default) or 1 GB LPDDR2 DRAM 128, 256, 512 MB (default) or 1 GB NAND Flash 4 (default) or 32 KB EEPROM 2 SD/SDIO/MMC Expansion slot 4 UARTs, 1 RS232, 3 I2C, 1 I2S and 2 SPI/SSP serial connections. 1 USB Host and 1 USB OTG ports. 10/100 MBit Ethernet 2 x DSI, 1 x HDMI video output ports up to 1080p encode/decode and Touch screen support DVI/HDMI, PWM, Camera, Keypad, JTAG and RTC Dimensions: 41 x 51 mm […]

April 5, 2011 by Jean-Luc Aufranc (CNXSoft) - No Comments

C Code to get MAC Address and IP Address

Function in C to return the MAC Address:

/* Returns the MAC Address
   Params: int iNetType - 0: ethernet, 1: Wifi
           char chMAC[6] - MAC Address in binary format
   Returns: 0: success
           -1: Failure
    */
int getMACAddress(int iNetType, char chMAC[6]) {
  struct ifreq ifr;
  int sock;
  char *ifname=NULL;

  if (!iNetType) {
    ifname="eth0"; /* Ethernet */
  } else {
    ifname="wlan0"; /* Wifi */
  }
  sock=socket(AF_INET,SOCK_DGRAM,0);
  strcpy( ifr.ifr_name, ifname );
  ifr.ifr_addr.sa_family = AF_INET;
  if (ioctl( sock, SIOCGIFHWADDR, &amp;ifr ) &lt; 0) {
    return -1;
  }
  memcpy(chMAC, ifr.ifr_hwaddr.sa_data, 6)
  close(sock);
  return 0;
}

/* Returns the MAC Address

Params: int iNetType - 0: ethernet, 1: Wifi

char chMAC[6] - MAC Address in binary format

Returns: 0: success

-1: Failure

int getMACAddress(int iNetType, char chMAC[6]) {

struct ifreq ifr;

int sock;

char *ifname=NULL;

if (!iNetType) {

ifname="eth0"; /* Ethernet */

} else {

ifname="wlan0"; /* Wifi */

}

sock=socket(AF_INET,SOCK_DGRAM,0);

strcpy( ifr.ifr_name, ifname );

ifr.ifr_addr.sa_family = AF_INET;

if (ioctl( sock, SIOCGIFHWADDR, &ifr ) < 0) {

return -1;

}

memcpy(chMAC, ifr.ifr_hwaddr.sa_data, 6)

close(sock);

return 0;

}

Function in C to return the IP Address:

/* Returns the interface IP Address
   Params: int iNetType - 0: ethernet, 1: Wifi
           char *chIP - IP Address string
   Return: 0: success / -1: Failure
    */
int getIpAddress(int iNetType, char chIP[16]) {
  struct ifreq ifr;
  int sock = 0;

  sock = socket(AF_INET, SOCK_DGRAM, 0);
  if(iNetType == 0) {
    strcpy(ifr.ifr_name, "eth0");
  } else {
    strcpy(ifr.ifr_name, "wlan0");
  }
  if (ioctl(sock, SIOCGIFADDR, &amp;ifr) &lt; 0) {
    strcpy(chIP, "0.0.0.0");
    return -1;
 }
 sprintf(chIP, "%s", inet_ntoa(((struct sockaddr_in *) &amp;(ifr.ifr_addr))-&gt;sin_addr));
 close(sock);
 return 0;
}

/* Returns the interface IP Address

Params: int iNetType - 0: ethernet, 1: Wifi

char *chIP - IP Address string

Return: 0: success / -1: Failure

int getIpAddress(int iNetType, char chIP[16]) {

struct ifreq ifr;

int sock = 0;

sock = socket(AF_INET, SOCK_DGRAM, 0);

if(iNetType == 0) {

strcpy(ifr.ifr_name, "eth0");

} else {

strcpy(ifr.ifr_name, "wlan0");

}

if (ioctl(sock, SIOCGIFADDR, &ifr) < 0) {

strcpy(chIP, "0.0.0.0");

return -1;

}

sprintf(chIP, "%s", inet_ntoa(((struct sockaddr_in *) &(ifr.ifr_addr))->sin_addr));

close(sock);

return 0;

}

Jean-Luc Aufranc (CNXSoft)Jean-Luc started CNX Software in 2010 as a part-time endeavor, before quitting his job as a software engineering manager, and starting to write daily news, and reviews full time later in 2011. www.cnx-software.com

April 4, 2011May 31, 2012 by Jean-Luc Aufranc (CNXSoft) - 4 Comments

Setting Up an NFS Server in Ubuntu

You may need to setup an NFS server on Ubuntu to run and debug your program on your target platform or simply to share media files on the network composed of Linux clients. If you are using Windows clients, you would usually use SAMBA/CIFS, although it is possible to setup an NFS server in Windows as well using Windows Services for UNIX 3.5. Quick Guide to to setup an NFS server in Ubuntu without authentication. Install the required packages: # sudo apt-get install nfs-kernel-server nfs-common portmap Reconfigure and restart portmap: # sudo dpkg-reconfigure portmap # sudo /etc/init.d/portmap restart Edit /etc/exports: # sudo vi /etc/exports Add the directories to share with NFS and save the file, for example: /nfs 192.168.1.0/24(rw,no_root_squash,async) will give full read/write permissions to the nfs directory for computer in 192.168.1.0 subnet. Restart the NFS server: # sudo /etc/init.d/nfs-kernel-server restart and reload the configuration: # sudo exportfs -a The […]

April 1, 2011April 1, 2011 by Jean-Luc Aufranc (CNXSoft) - No Comments

Hercules eCAFE ARM Cortex A8 Netbooks running Linux

Hercules, a subsidiary of Guillemot Corporation, announced two new eCAFÉ netbooks based on Freescale i.MX515 @ 800 Mhz (ARM Cortex A8) that run a custom Linux distribution and feature a dipswitch for flipping to other user-loaded Linux or Android operating systems: eCAFÉ Slim HD – 229 USD: LED screen: 10.1 inch, 1024*600, high brightness Storage: 8Gb Flash (iNAND), extensible up to 72Gb ARM CortexTM A8 FreescaleTM i.MX515 @ 800 MHz processor RAM: 512 Mb WiFi N technology Battery: 2400 mAh (7.4V) for 4.5 hours’ battery life Comfortable “chiclet” keyboard with flat, separate keys – 88% of a standard keyboard 0.3MP webcam with built-in microphone Connections: 3x USB, 1x Headset, 1x Microphone, 1x LAN RJ45, 1x DC-in 12V, 1x External card reader: SD/MMC/SDHC, 1x Internal card reader: SD/SDHC DIP Switch Weight: 1.9lbs / 0.86 kg eCAFÉ EX HD – 269 USD: LED screen: 10.1 inch, 1024*600, high brightness Storage: 16Gb extensible […]

March 31, 2011March 31, 2011 by Jean-Luc Aufranc (CNXSoft) - 4 Comments

Firefox 4 for Android and Firefox Mobile for Computer

Mozilla has just released Firefox 4 for Android or Nokia N900 (Maemo) which is available for download at http://www.mozilla.com/en-US/mobile/download/ and on the Android Market. Have a look at the video below to see the main features of Firefox 4 Mobile such as multiple tabs, full screen browsing (no menu), panning and zooming, firefox sync to synchronize all your devices, spam filters, add-ons, personas and more. If you do not have an Android device or Nokia N900, you can still test if your mobile website works fine as Mozilla also provides Firefox for mobile to your desktop computer for Windows, MAC OS X and Linux. I’ve try it for Windows XP. There is no installer, after you download the file, simply extract the files in C:\Program Files for example, and then run C:\Program Files\fennec\fennec.exe to start Firefox 4 Mobile on your computer, it will open a 480×800 Window. Fennec is the […]