Operating Systems Category - Page 239 of 1033 - CNX Software

September 16, 2021September 16, 2021 by Jean-Luc Aufranc (CNXSoft) - 4 Comments

Intel Seamless Update to enable BIOS/UEFI firmware updates without a reboot

Intel Seamless Update - MM Runtime Update System

Updating the BIOS/UEFI binary usually requires a reboot, but Intel is working on changing that, at least on Linux servers for now, with the Intel Seamless Update aiming to carry out system firmware updates (e.g. UEFI) at run-time without having to reboot, a bit like what Canonical does with the Ubuntu Livepatch service, but at a lower level in the software stack. Intel submitted a patch that “Introduces Platform Firmware Runtime Update and Telemetry drivers” to the Linux kernel mailing list a couple of days ago with the description reading in part: High Service Level Agreements (SLAs) requires that the system runs without service interruptions. Generally, system firmware provides runtime services such as RAS (Reliability, Availability and Serviceability) features, UEFI runtime services and ACPI services. Currently if there is any firmware code changes in these code area, the system firmware update and reboot is required. Example of bug fix could […]

September 16, 2021April 5, 2023 by Jean-Luc Aufranc (CNXSoft) - 9 Comments

Home Assistant Yellow – A Raspberry Pi CM4 based automation gateway (Crowdfunding)

The team behind the popular Home Assistant open-source home automation framework has just launched their second hardware with Home Assistant Yellow automation gateway based on Raspberry Pi CM4 module. This follows last year’s ODROID-N2+ based Home Assistant Blue which was a limited edition and has now been discontinued, albeit still supported. The carrier board for Home Assistant Amber is designed from scratch and notably includes Silicon Labs MGM210P Mighty Gecko Module with support for Zigbee 3.0, OpenThread, and Matter (Soon), as well as M.2 socket that can take an NVMe SSD, or an AI accelerator card. Home Assistant Yellow specifications: Supported SoM – Raspberry Pi Compute Module 4 (CM4) with Broadcom BCM2711 quad-core Cortex-A72 processor @ 1.5 GHz, up to 8GB RAM, up to 32GB storage. (Note: optional WiFI 5 and Bluetooth 5.0 connectivity not covered by regulatory approval) Storage – Support for NVMe SSD via M.2 socket, bootable for […]

September 15, 2021 by Jean-Luc Aufranc (CNXSoft) - No Comments

TopJoy ButterFly is a Full-Color DES Screen e-Reader with Android 11 (Crowdfunding)

TopJoy ButterFly is a full-color DES screen e-Reader running Android 11 on a quad-core Cortex-A55 processor that appears to be the same Rockchip RK3566 processor used in the upcoming PineNote e-reader. Two models of the e-Reader are offers with E601 fitted with a 6-inch display and E701 with a larger 7.8-inch display both offering 300 PPI for black & white content and 150 PPI for color, and equipped with 2GB RAM & 32GB storage by default, an option for 4GB RAM and 64GB storage for the larger display. TopJoy Butterfly specifications: SoC – Rockchip RK3566 quad-core A55 processor up to 1.8 GHz with Mali-G52 EE GPU, 0.8 TOPS AI accelerator System Memory – 2GB RAM (option for 4GB for E701) Storage – 32 GB eMMC flash (option for 64GB for E701) Display E601 – 6-inch DES color e-Paper display with 1072 x 1448 resolution; 150 PPI for color, 300 PPI […]

September 15, 2021April 20, 2025 by Jean-Luc Aufranc (CNXSoft) - 29 Comments

ASUS Tinker Board 2S SBC launched for $120 and up

ASUS unveiled the Tinker Board 2 SBC with faster a Rockchip RK3399/OP1 processor together with the ASUS Tinker Board 2S board that adds a 16GB eMMC flash last October without pricing information. The good news is that the 2GB RAM version of Tinker Board 2S is now available on Amazon and Aliexpress for $120 and up. Note you’ll get a 5% discount if you are a follower on Aliexpress for a total of $132.99 including shipping. Compared to the first Tinker Board, the new boards are also offered with up to 4GB LPDDR4 RAM, an additional video output option with USB-C DisplayPort Alt mode, an upgrade to USB 3.0 ports and WiFi 5, RTC battery support, and a more stable 12V to 19V DC input. Here’s a reminder of Tinker Board 2S specifications: SoC – Rockchip RK3399 (OP1) hexa-core processor with 2x Arm Cortex-A72 cores up to 2.0 GHz, four […]

September 14, 2021September 14, 2021 by Jean-Luc Aufranc (CNXSoft) - 10 Comments

Portenta H7 Lite cost-optimized Arduino Pro board drops WiFi, USB-C video output, NXP secure element

Arduino Portenta H7 Lite is a cost-down version of Portenta H7 STM32H7 that shaves off a little over $30 of the Arduino Pro board by doing without a wireless module nor USB-C video output and opting for a lower cost Microchip ATECC608 secure element. Arduino says the new board provides a cost-optimized solution for companies developing high-end industrial machinery, laboratory equipment, computer vision, PLCs, robotics controllers, and mission-critical devices. Arduino Portenta H7 Lite specifications (with differences in bold or strikethrough): Microcontroller – STMicro STM32H747XI Cortex-M7 @ 480 MHz + M4 @ 200 MHz MCU with 2MB dual-bank Flash memory, 1 MB RAM, Chrom-ART graphical hardware accelerator System Memory – 2MB SDRAM (upgradeable up to 64MB) Storage – 16MB QSPI NOR Flash (Upgradeable up to 128MB) Connectivity 2.4GHz WiFi 802.11b/g/n up to 65 Mbps and Bluetooth 5.1 BR/EDR/LE via Murata 1DX module On-board 10/100M PHY Video I/F – MIPI DSI & […]

September 13, 2021September 13, 2021 by Jean-Luc Aufranc (CNXSoft) - 13 Comments

RK3399 based Industrial computer runs Debian 9.0 or Android 7.1

Vecow EIC-1000 in an industrial Edge AI computer powered by Rockchip RK3399 hexa-core Cortex-A72/A53 processor with 9V to 55VDC wide-range supply input, an operating temperature range of 0°C to 70°C, and designed for digital signage, factory automation, smart retail, and other AIoT/Industry 4.0 applications. The fanless mini PC is equipped with 2 GB DDR3 SDRAM and 32GB eMMC flash, offers 4K video output via HDMI, Gigabit Ethernet, USB 3.0/2.0, and RS232/RS485 serial ports, and more. Vecow EIC-1000 specifications: SoC- Rockchip RK3399 hexa-core Arm processor with dual-core Arm Cortex-A72 @ 2.0 GHz, quad-core Cortex-A53 @ 1.6GHz, Arm Mali-T860MP4 GPU System Memory – 1GB or 2GB DDR3L 1066MHz SDRAM Storage – 32GB eMMC flash, MicroSD card socket Video Output – HDMI 2.0 output up to 4Kp60 Video Encoder – Up to 1080p30 H.264/MVC/VP8 Decoder Up to 4Kp60 H.264/H.265 10-bit, VP9 Up to 1080p60 MPEG-4/MPEG-2/VP8 Audio – 3.5mm headphone and microphone jacks, Networking […]

September 13, 2021July 4, 2022 by Jean-Luc Aufranc (CNXSoft) - 26 Comments

AAEON PICO-TGU4 Pico-ITX Tiger Lake UP3 SBC Comes with 2.5 GbE, SATA, HDMI & eDP

I’ve just written about the first Tiger Lake UP3 Pico-ITX motherboard I’ve seen with Commell LP-179 equipped with an Intel Core i7 or Celeron processor, but while doing research on the topic, AAEON PICO-TGU4 Pico-ITX SBC with “11th Generation Intel Core i7/i5/i3/Celeron U-Series Processor SoC” showed up. More specifically, the PICO-TGU4 Pico-ITX SBC features processors from the Tiger Lake UP3 family, comes with up to 32GB RAM, SATA storage, HDMI output, dual Gigabit Ethernet, dual USB 3.2, and more. But we’ve now got some photos and key features & specifications for AAEON PICO-TGU4 SBC: SoC – 11th Generation Intel Core i7/i5/i3/Celeron Tiger Lake UP3 SoC up to 4.8 GHz System Memory – Up to 32GB LPDDR4x 3200 MHz on-board memory, optional In-Band ECC for Tiger Lake GRE processors, only available upon request Storage – 1x SATA port Video Output HDMI 2.0b port up to 4Kx2K 60Hz 1x eDP up to […]

September 12, 2021September 14, 2021 by Jean-Luc Aufranc (CNXSoft) - 15 Comments

Getting started with Bluetrum AB32VG1 RISC-V Bluetooth audio board using RT-Thread

Bluetrum AB32VG1 is a development board based on AB5301A RISC-V microcontroller designed for Bluetooth audio applications as well as general-purpose projects that works with RT-Thread real-time operating system. RT-Thread sent me a board for review, and I’ll write about my experience in a getting started guide for Bluetutm AB32VG1 trying out the RT-Thread Studio IDE with the LED blink and audio samples, as there’s no Bluetooth sample at this time… Bluetrum AV32VG1 Unboxing The board ships with a USB-C cable for power and programming. It offers Arduino UNO headers for expansion, a MicroSD card slot, a USB host port, a 3.5mm audio jack, an IR receiver, and a few buttons. There’s nothing to do on the bottom of the board apart from a QR Core for the WeChat app. There are also several configuration jumpers, but I could not find any documentation about these and did not mess with the […]