Operating Systems Category - Page 378 of 1032 - CNX Software

June 19, 2019June 19, 2019 by Jean-Luc Aufranc (CNXSoft) - 60 Comments

$9.9 ROCK Pi S is a Tiny SBC Powered by Rockchip RK3308 Processor

Radxa launched their low cost ($40) Rock Pi 4 SBC powered by Rockchip RK3399 processor a little over 18 months ago. If you are subscribed to their mailing list, the company has now sent an email entitled “ROCK Pi Summer Updates 2019” (no link available) that reports about v1.4 of the board with 4MB SPI flash onboard, an external WiFi antenna connector, and various other small changes, as well as the announcement of RockPi PoE HAT to power the board from an Ethernet cable, and an USB 3.0 eMMC card reader. But what particularly caught my attention in the email was a new tiny single board computer powered by Rockchip RK3308 Cortex-A35 processor: Rock Pi S selling for as low as $9.9 with 256MB RAM, and targetting headless IoT & smart voice applications. Rock Pi S board specifications: SoC – Rockchip RK3308 quad-core Arm Cortex-A35 processor with built-in VAD (Voice […]

June 17, 2019 by Jean-Luc Aufranc (CNXSoft) - 13 Comments

Dakota DR40X9 Wave-2 AC Router Board is Based on Qualcomm QCA4019/QCA4029 WiSoC

Dakota DR40X9 QCA4019/QCA-4029 Wave-2 AC Router Board

Qualcomm is mostly known for its Snapdragon processors for mobile devices and wearables, but the company is also making WiFi chipsets via their (previously) “Atheros” family. Some of their latest WiFi SoCs are IPQ4019 and IPQ4029 (aka QCA4019/QCA4029) Wave-2 802.11ac “Dakota” SoCs for routers, gateways, and access points. We recently covered the official Qualcomm mesh networking devkit powered by IPQ4019 processor, but there are now third parties also offering solutions based on QCA40x9 processor such as Dakota DR40X9 Wave-2 AC router board. Dakota DR40X9 board specifications: SoC (one of the other) Dakota DR4019 -Qualcomm IPQ4019 quad-core Arm Cortex A7 processor @ 717 MHz with 802.11ac Wave 2 WiFi Dakota DR4029 – Qualcomm IPQ4029 quad-core Arm Cortex A7 processor @ 717 MHz with 802.11ac Wave 2 WiFi System Memory- 256MB~512MB DDR Storage – 2MB~32MB NOR Flash, 128MB NAND Flash, microSD card slot Connectivity Wired Dual 10/100/1000Mbps Gigabit Ethernet (RJ45) 1x optional […]

June 17, 2019 by Jean-Luc Aufranc (CNXSoft) - 4 Comments

KB-IDE Open Source IDE Supports ESP-IDF, Arduino, and Visual Programming for ESP32 Boards

We’ve previously written about MakerAsia when covering their KBX Extension case for Kidbright ESP32 educational board. The company has now launched a new product, but it’s not an hardware platform, and instead KB-IDE is an open IDE (Integrated Development Environment) ESP32 boards. The IDE is suitable whatever your level from kids getting started with supports visual programming, to Arduino programming, and even the official Espressif ESP-IDF framework for more experienced makers. The IDE comes with with a Board Manager, a Plugins System and works with any Arduino Library out of the box. Made with Vue.js framework, KB-IDE is open source with the code available on Github. You can install a binary release, or build it from source for Windows, Linux, or Mac OS. Since it’s open source, it’s also expandable so makers can customize it, for instance by adding new architectures (AVR and ARM are already planned), new boards, creating […]

June 14, 2019June 14, 2019 by Jean-Luc Aufranc (CNXSoft) - 14 Comments

DM&P Vortex86EX2 Dual Core Processor Targets Dual OS Systems, Support ISA & PCI Interfaces

Most people will probably think about Intel and AMD when asked about x86 processors, at least those who understand the question… But there are also other companies such as Zhaoxin (based on VIA Technologies designs) and DM&P. Last time I wrote about the latter was in 2015 with the introduction of DM&P Vortex86DX3 dual-core x86 SoC for embedded systems and the corresponding evaluation board. The company is still making new x86 processors, and I’ve just been information the company unveiled Vortex86EX2 dual-core processor last year with master and slave cores suitable for running two operating systems at the same time without the need for virtualization, nor hypervisor. The new processor still supports ISA & PCI interfaces for legacy expansion cards and targets real-time industrial or automation applications. DM&P Vortex86EX2 specifications: Processor Cores Master @ 600MHz max with Build-in FPU L1/L2 Cache for user interface Slave @ 400MHz max with Build-in […]

June 14, 2019 by Jean-Luc Aufranc (CNXSoft) - 5 Comments

Strawberry4Pi Enables Home Automation on Raspberry Pi Boards (Crowdfunding)

Strawberry4Pi is an ecosystem of hardware, firmware, and software to create home automation and IoT projects with for Raspberry Pi boards. The project offers a pre-configured Linux operating system, a mobile app for Android and iOS, as well as two boards with four relays: Strawberry4Pi baseboard Zero for Raspberry Pi Zero (W), and Strawberry4Pi shield A/B for the larger boards such as Raspberry Pi 3 Model B+ or Model A. Strawberry4Pi boards specifications: 4x SONGLE relays Misc – Temperature sensor and Wifi configuration button Power Supply Baseboard Zero – 100V-220V via 3-pin terminal block Shield A/B – 5V via 2-pin terminal block Dimensions Baseboard Zero – 97 x 75 mm Shield A/B – 65 x 56 mm Certifications – CE/FCC A 3D printed case and a DIN rail mount are also offered as options. There’s no a whole lot of information about the operating system as most people won’t need […]

June 13, 2019June 14, 2019 by Tiwalade Joanna Okedara - 8 Comments

Ugoos AM6 Fanless S922X TV Box Launched for $150

For those that have been waiting for the launch of the Ugoos AM6 S922X TV box, enough of the anticipation. The long wait is now finally over! Earlier in April, we reported the increased mass production of Amlogic processors. With the Ugoos AM6 taking the lead, producing a fan cooled prototype. We are pleased to inform you that a fanless version of the TV box has finally been released, and is available in the market for just $150. Also, we now have some photos of its enclosure While Beelink GT1-K launched around mid-April, its specifications are slightly different from Ugoos features. What Features to Expect from the new AM6 Main Features An Android 9.0 operating system. Fully equipped with the Amlogic S922X CPU, Quad core, ARM Cortex-A73, 1.7GHz + Dual-core ARM Cortex A53 1.8GHz. An ARM Mali-G52 MP6 ( 6ppc ) GPU Up to 2GB LPDDR4 RAM + 16GB EMMC […]

June 13, 2019 by Jean-Luc Aufranc (CNXSoft) - 22 Comments

Banana Pi BPI-M4 RPi 3+ Lookalike Board with 4K Video, M.2 Socket Launched for $38

Banana Pi BPI-M4 was unveiled at the beginning of the year as an alternative to Raspberry Pi 3B+ with the same form factor, but equipped with a more capable processor, namely Realtek RTD1395 with support for 4K video output and decoding, Gigabit Ethernet support, PCIe, etc.. SinoVoIP has however made the choice not to go with Gigabit Ethernet, and opted for a cheaper design with Fast Ethernet instead. Having said that, the 4K capabilities of the processor, and PCIe via an M.2 socket are still leveraged in the company’s latest Banana Pi board. What’s changed is that Banana Pi BPI-M4 is now available on Aliexpress for $38 plus shipping in 1GB RAM + 8GB flash storage configuration. Banana Pi BPI-M4 specifications have not changed: SoC – Realtek RTD1395 quad-core Arm Cortex-A53 processor with Mali-470 MP4 GPU System Memory – 1 GB DDR4 (option 2 GB) Storage – 8G eMMC flash […]

June 13, 2019June 13, 2019 by Jean-Luc Aufranc (CNXSoft) - 10 Comments

New Release (1.3.5) for H3Droid Android OS Optimized for Allwinner H3 & H2+ Processors

H3Droid project provides Android images for Allwinner H3 & H2+ boards and TV boxes in order to improve on the firmware released by manufacturers. Last time we wrote about was in 2017, but the project released H3droid 1.3.5 recently with several improvements.. The good news is that more boards are supported with a bit fix that for example enables H3Droid to work on Orange Pi Zero (256MB RAM) and Libre Computer Tritium H2+ SBC’s, but the bad news is that it’s still based on Android 4.4 Kitkat, so some apps are not working anymore including Kodi, and the default YouTube app had to be removed since it does work not anymore. Workarounds do exist though, as you can install SPMC fork of Kodi, and play YouTube videos in a web browser, or install it manually after updating Google Play Services. Here’s the full changelog provided by the developers: Added: fex/uboot […]