AMLogic Category - Page 67 of 93 - CNX Software

November 13, 2015November 13, 2015 by Jean-Luc Aufranc (CNXSoft) - 101 Comments

List of Amlogic S905 TV Boxes and Sticks

Rockchip RK3368 TV boxes looked promising at the end of the summer, but ended up being disappointing, not because of their expected lower performance compared to RK3288, but simply because they could not deliver on their main selling point: 4K H.265 / H.264 video playback, and the sheer number of issues with the first devices selling for nearly the same price as equivalent Rockchip RK3288 devices. Rockchip RK3368 will soon have a worthy competitor with Amlogic S905, which won’t deliver amazing benchmark scores, but looks promising for its 4K 10-bit HEVC video playback, HDMI 2.0 and HDCP 2.2, and historically Amlogic delivers better video playback than Rockchip. The first Amlogic S905 TV boxes should start shipping by the end of the month, and prices are starting very low, just over $40, thanks to competition between the many manufacturers launching devices based on the new Amlogic SoC. That’s why I’ve decided […]

November 11, 2015May 29, 2017 by Jean-Luc Aufranc (CNXSoft) - 21 Comments

Giveaway Week Winners (November 2015)

The third giveaway week, and the second in 2015, on CNX Software is now complete. I’ve just sent the packages this morning, including 4 Android TV boxes, 2 Linux media players, and a development board to the winners from Europe, North America, and for the first time, Oceania. The winners were selected randomly from the list of people who comments, and without any further due, here are the results: let’s go through the winners and their country of residence, with links to the original individual winner announcements: Zidoo X6 Pro – Marko, Slovenia ARNU Box Mach Q Pure Linux – Xavier, Belgium M-195 TV box – Fran, Spain A80 OptimusBoard development board – Gil, Portugal M8S TV box – Roel, Belgium Tronfy Telos MXIV – Treb “winners are grinners”, Australia Popcorn Hour VTEN – ax, USA While last time, people living in Canadians were the luckiest, this giveaway was kind to people […]

November 9, 2015 by Jean-Luc Aufranc (CNXSoft) - 19 Comments

Ugoos AM1 TV Box and Some Amlogic S905 Benchmarks

A few TV boxes based on Amlogic S905 processor are currently up for pre-order such as MXQ Pro and Beelink MINI MX mini PCs with 1GB RAM, 8GB storage, and which are due to ship later this month. Ugoos is also working on their own AM1 TV box and AM2 TV stick based on Amlogic S905 processor, with some better specs, and today released a few more details about Ugoos AM1. Ugoos AM1 specifications: SoC – Amlogic S905 quad core ARM Cortex-A53 @ up to 2.0GHz with penta-core Mali-450MP GPU @ 750 MHz System Memory – 2GB DDR3 (Samsung); 4GB version likely later on Storage – 16GB eMMC flash + SD card slot Video Output – HDMI 2.0 Audio – HDMI, optical S/PDIF Connectivity – 10/100/1000M Ethernet (Realtek RTL8211F), 802.11 b/g/n/ac Wi-Fi and Bluetooth 4.0 (AP6335 module) USB – 3x USB 2.0 host ports Misc – IR receiver Power Supply – […]

November 7, 2015November 9, 2015 by Jean-Luc Aufranc (CNXSoft) - 244 Comments

Giveaway Week – Tronfy MXIV Telos Android Lollipop TV Box with Amlogic S812 Processor

After Eny M8S yesterday, I’m now giving away another Amlogic S812 quad core TV Box with Tronfy MXIV Telos. Noticeable differences are that it runs Android 5.1 instead of Android 4.4, and features more storage (16GB), 802.11ac WiFi, and Gigabit Ethernet. So on paper Tronfy MX4 Telos appears to be a great improvement over products like M8S with better hardware, and a more recent Android firmware. While Tronfy MVIX Telos review did confirm the hardware was pretty good with good networking performance and a fast internal storage, the firmware was not quite ready for prime time, with disastrous Kodi support, and a settings app that would keep on crashing. There’s not much you can do about the latter without a newer firmware, but you might try out some other versions of Kodi to improve video playback. You can find more photos on the unboxing and teardown post. To enter the […]

November 6, 2015November 8, 2015 by Jean-Luc Aufranc (CNXSoft) - 245 Comments

Giveaway Week – Eny M8S Android TV Box

Today, I’m going to give away Eny M8S, an Android media player based on Amlogic S812 processor with 2GB RAM and 8GB NAND flash that runs Android 4.4, and supports H.265 video playback up to 3840×2160 at 30 fps. How does the device perform? Well, I don’t really know because I postponed the review due to many problems including HDMI going on and off, lack of Google Play Store, some power issues, and eventually the box refused to boot. When I finally got a new firmware, I did upgrade it, but so many months had passed, that I postponed the review indefinitely… Having said that, I tested its 4K capabilities later on, and again before this giveaway to reset the box to factory settings, and it booted fine… The box is not abandoned, as the company released a new firmware at the beginning of this month, so the lucky winner […]

November 4, 2015May 29, 2017 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

Linux 4.3 Release – Main Changes, ARM and MIPS Architectures

Linus Torvalds released Linux Kernel 4.3 last week-end: So it *felt* like the last week of the rc series was busy, to the point where I got a bit worried about the release. But doing the actual numbers shows that that really was just my subjective feeling, probably due to the kernel summit and travel back home from Korea. It wasn’t actually a particularly busy week, it’s just that the pull requests were more noticeable in the last couple of days. We had a network update and a late fix for a x86 vm86 mode bug introduced by the vm86 cleanups, but other than that it’s just a collection of various small one-liners all over. Ok, the vm86 mode thing was a one-liner too, it was just slightly more nerve-wracking because it looked scarier than it was before people (Andy) figured out what was going on. The changes from rc7 […]

November 3, 2015November 5, 2015 by Jean-Luc Aufranc (CNXSoft) - 232 Comments

Giveaway Week – ARNU Box Mach Q Pure Linux Media Player

The second device for this giveaway week is ARNU Box Mach Q TV box that runs Kodi 15.2 on an Amlogic S805 quad core processor with 1GB RAM and 8GB flash, the little brother of ARNU Box Mach 10 powered by the more powerful Amlogic S812 processor. Due to lack of time I did not review ARNU Box Mach Q, but I did review ARNU Box Mach 10, which is loaded with a similar firmware based on Linux based EmBER OS. Video playback was very good with Kodi 15.2 with automatic frame rate switching support, working audio pass-through via S/PDIF, but HDMI audio pass-through did not work with my AV receiver. Since it’s the same firmware base, I fully expect the same good video experience on ARNU Box Mach Q minus support for 4K videos. You can find more pictures on ARNU Box Mach Q unboxing and teardown post. To […]

October 28, 2015 by Jean-Luc Aufranc (CNXSoft) - 25 Comments

$47 Beelink MINI MX Android 5.1 TV Box Features Amlogic S905 Processor

It really feels like Christmas is around the corner, as deals on new and existing products keep on coming. About two weeks ago, I noted one of the first TV boxes based on Amlogic S905 processor, MXQ Pro, was starting (pre-)selling for as low as $48. Not bad for a device that is supporting HDMI 2.0 and 10-bit HEVC up to 4K @ 60 fps. Since then the price has gone up a little to $52 shipped, but Beelink MINI MX has started to up show up on a few sites, and the device is pre-sold for $46.89 on GearBest with GBMINIX coupon. The case is very similar to Allwinner H3 based Beelink X2, and the specifications similar to the ones for MXQ Pro: SoC – Amlogic S905 quad core ARM Cortex-A53 @ up to 2.0GHz with penta-core Mali-450MP GPU @ 750 MHz System Memory – 1GB DDR3 Storage – […]