Qualcomm Atheros Category - Page 6 of 14 - CNX Software

December 23, 2021 by Jean-Luc Aufranc (CNXSoft) - 6 Comments

Dual 10GbE router supports WiFi 6 (AX3600)

We’ve just written about a Qualcomm IPQ8072A SBC/reference design with two 10GbE ports and WiFi 6 that’s good for companies wanting to design their own system, but if you’re looking for a dual 10GbE router there are already options, notably QNAP QHora-310W sold for $329 on Amazon. But another dual 10GbE router with WiFi 6 was brought to my attention from a company I had never heard of. Acelink BR-6889AX is a WiFi 6 “AX3600 4T4R 10GE Router” based on Qualcomm IPQ8072A processor that’s suitable for the connected home and office networks including WFH use cases. Acelink BR-6889AX specifications: SoC – Qualcomm Hawkeye IPQ8072A quad-core Cortex A53 @ 2.2GHz with dual-core multi-threaded network accelerator, In-line security engine System Memory – 512 MB DDR3 (2x 256MB) Storage – 4MB SPI NOR flash, 128MB NAND flash Networking Wired 2x 100/1,000/2,500/5,000/10,000Mbps BASE-T Ethernet (RJ45) ports with Link/Act, Speed LED 3x 10/100/1,000Mbps BASE-T Ethernet […]

December 21, 2021December 23, 2021 by Jean-Luc Aufranc (CNXSoft) - 5 Comments

Qualcomm IPQ8072A networking SBC supports dual 10GbE, WiFi 6

DR8072 V01 is a networking SBC based on Qualcomm IPQ8072A communication processor, with two 10GbE interfaces, one through an SFP cage and the other through an RJ45 connector, plus four Gigabit Ethernet ports, and 4×4 MIMO WiFi 6 connectivity (AX3700). Based on Qualcomm AP.HK09 reference design, the board follows Wallys Communications’ DR8072A embedded router board introduced earlier this year, also based on Qualcomm IPQ8072, but equipped with two 2.5 GbE interfaces and WiFi 6 connectivity. DR8072 V1 specifications: SoC – Qualcomm Atheros IPQ8072A quad-core Arm Cortex-A53 @ 2.2 GHz part of Qualcomm Networking Pro 1200 Platform System Memory – 512MB DDR4 2400MHz 16-bit interface (option up to to 2GB RAM) Storage – 8MB NOR flash, 256MB NAND flash Networking Wireless On-board 4×4 2.4GHz MU-MIMO OFDMA 802.11b/g/n/ax, max 17dBm per chain, up to 1147Mbps On-board 4×4 5GHz MU-MIMO OFDMA 802.11a/n/ac/ax, max 17dBm per chain, up to 2475Mbps Frequencies – 2.412 to […]

December 17, 2021April 5, 2022 by Jean-Luc Aufranc (CNXSoft) - No Comments

Inforce 68A1 SoM supports up to seven 4Kp120 cameras, dual 4Kp120 video encoding/decoding

SMART Wireless Computing has announced the Inforce 68A1, a compact system-on-module based on Qualcomm QCS8250 IoT processor with support for up to seven concurrent 4Kp120 camera inputs, and decode/encode two 4Kp120 video streams simultaneously. Equipped with 8GB PoP DDR5 memory, 64GB UFS storage, a wireless module supporting 802.11ax Wi-Fi 6E and Bluetooth 5.1, the module is designed for high-end IoT applications such as smart cameras, video collaboration, AI hubs, connected healthcare, and smart retail. Inforce 68A1 specifications: SoC – Qualcomm QCS8250 octa-core Kryo 585 processor up to 2.84 GHz (high-performance cores) or 1.8 GHz (low power cores) with Adreno 650 GPU, Adreno 665 VPU, Adreno 995 DPU, Hexagon DSP with quad HVX, NPU230 neural processing unit, Spectra 480 ISP; 15 TOPS AI processing power System Memory – 8GB LPDDR5 (PoP) Storage – 64GB UFS flash Wireless – Qualcomm QCA6391 with 802.11 a/b/g/n/ac/ax Wi-Fi 6 2×2 MIMO, Bluetooth 5.1 Audio – […]

October 13, 2021October 13, 2021 by Jean-Luc Aufranc (CNXSoft) - No Comments

NETGEAR RBKE963 Orbi quad-band WiFi 6E mesh system delivers up to 10.8Gbps speed

NETGEAR Orbi quad-band WiFi 6E mesh system

NETGEAR RBKE963 Orbi quad-band WiFi 6E mesh system delivers wireless connectivity through the home with one router and two satellites with a maximum wireless link of 10.8 Gbps. one 10GbE WAN port for Internet connectivity, and several 2.5GbE and Gigabit Ethernet LAN ports. Powered by a quad-core 2.2GHz processor, the mesh system supports 2.4 GHz, 5.2 GHz, 5.8 GHz, and the new 6 GHz band offered by WiFI 6E, covers an area of up to around 840 square meters, and supports up to 200+ clients. NETGEAR RBKE963’s router and satellites share most of the same specifications: SoC – Unnamed quad-core processor @ 2.2 GHz (likely Qualcomm Networking Pro 1610 Platform) Memory & Storage RBRE960 router – 1 GB RAM, 512MB NAND flash RBSE960 satellites – TBD WiFi connectivity Radio 1: IEEE 802.11b/g/n/ax 2.4GHz with 1024-QAM support up to 1200 Mbps Radio 2: IEEE ® 802.11a/n/ac/ax 5GHz with 1024-QAM support up […]

August 23, 2021 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

Qualcomm IPQ4019 802.11ac Wave 2 WiFi system-on-module comes with Dual Gigabit Ethernet baseboard

Wallys Communication has introduced their lowest cost networking platform with the DR4019S board equipped with two Gigabit Ethernet ports, as well as a Qualcomm IPQ4019 802.11ac Wave 2 WiFi system-on-module. The module comes with 32MB NOR flash, and 256MB DDR memory and targets applications ranging from security surveillance to commercial radio coverage to hotel wireless applications, or even forest fire protection engineering. DR4019S board specifications: SoC – Qualcomm IPQ4019 quad-core Arm Cortex A7 at 716.8 MHz System Memory – 256MB DDR Storage – 32MB NOR flash Connectivity 2x Gigabit Ethernet ports 802.11b/g/n/ac Wave 2 WiFi 5 with 2x 5G MMCX connectors, 2x 2.4G MMCX connectors (but we can only see one or two of those on the provided photo) USB – 1x USB 3./2.0 port Misc – Debug UART header Power Supply – 12V via DC jack Power Consumption – 9.6W (max) Dimensions – 65 x 35 x 16mm Temperature […]

August 21, 2021May 5, 2024 by Jean-Luc Aufranc (CNXSoft) - 76 Comments

Review of “4G LTE WiFi Modem” hotspot

I’ve purchased a USB dongle acting as a WiFI & 4G cellular router with a generic name “4G LTE WiFi Modem” and listed as “4G LTE WiFi Hotspot Wireless Router USB Dongle 150Mbps Modem Stick Sim Card” on the online store (Lazada) I bought it from. 4G LTE WiFi Modem unboxing It’s a 3-in-1 device that works as a 4G USB dongle connected to a PC or laptop, a 4G USB WiFi cellular router/hotspot, and a USB flash drive when adding a MicroSD card. 4G performance is limited to 150Mbps DL, 50Mbps UL, while WiFi only supports up to 72 Mbps using 802.11n 2.4GHz WiFi. That’s perfectly fine for my use case, as the plan is to use it as a standalone WiFi hotspot with an unlimited 10 Mbps SIM card, and in locations with low population densities so 5GHz WiFi is not a must. The USB dongle ships with […]

August 9, 2021November 18, 2022 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

Compact H.265 4K video encoder is made for embedded, medical, and military applications

US-based Z3 Technology has announced the Z3-Q603-RPS, a compact H.265 video encoder system capable of supporting 4K and HD resolutions for embedded, medical, and even military camera applications through NDAA (National Defense Authorisation Act) compliance. The board runs Linux on Qualcomm QCS603 IoT processor for AI and computer vision applications, which we previously found in Microsoft’s Vision AI Developer Kit, supports Ethernet and WiFI 5 connectivity, as well as features such as PTZ (Pan Tilt Zoom). Z3-Q603-RPS H.264 & H.265 video encoder system is comprised of an application board and a module with the following specifications: SoC – Qualcomm QCS603 (aka Qualcomm Vision Intelligence 300 Platform) with four Armv8 cores (2x 1.6GHz Kryo 300 Gold cores, 2x 1.7GHz Qualcomm Kryo 300 Silver cores ), Snapdragon neural processing engine, Adreno 615 GPU at 780 MHz System Memory – TBD Storage – NAND flash (capacity TBD) , MicroSD card socket Video Output […]

July 26, 2021July 26, 2021 by Jean-Luc Aufranc (CNXSoft) - No Comments

TurboX C865 CPU module and 96Boards devkit feature Qualcomm QCS8250 IoT processor

Thundercomm has unveiled another Qualcomm IoT module and development kit with the TurboX C865 SOM and development kit based on Qualcomm QCS8250, based on Snapdragon 865 but for IoT applications, which follows our coverage of the company’s TurboX CM2290 and C2290 SoM & devkit based on Qualcomm QCM2290/QCS2290 quad-core Cortex-A53 processor several days ago. The new TurboX C865 system-on-module is for higher-end IoT applications with a faster processor combines with 8GB LPDDR5 RAM, and 128G UFS storage, WiFI 6 & Bluetooth 5.1 connectivity, and the company also offers a 96Boards compliant development kit to help with the development of more advanced IoT products running Android 10. TurboX C865 SoM Specifications: SoC – Qualcomm QCS8250 octa-core Kryo 585 processor with Adreno 650 GPU, Adreno 665 VPU, Adreno 995 DPU, Hexagon DSP with quad HVX, Spectra 480 ISP; 15 TOPS AI processing power System Memory – 8GB LPDDR5 (PoP) Storage – 128G […]