Rockchip RK33xx Category - Page 30 of 46 - CNX Software

March 5, 2018March 5, 2018 by Jean-Luc Aufranc (CNXSoft) - 3 Comments

OpenEmbed Launches $99 em3399 Rockchip RK3399 SoM, and a Compact Evaluation Kit

Looking for a system-on-module based on Rockchip RK3399 processor? So far, you had at least four options with either edge connectors or castellated holes: Theobroma RK3399-Q7 (Qseven) SoM, 9Tripod X3399 core, Boardcon PICO3399 CPU module, or Firefly-RK3399 CoreBoard. OpenEmbed now offers another RK3399 system-on-module with their em3399 SoM using board-to-board connectors interfacing with the carrier board. OpenEmbed em3399 system-on-module specifications: SoC – Rockchip RK3399 hexa-core processor with 2x Cortex-A72 cores, 4x Cortex-A53 cores, and a Arm Mali-T860MP4 GPU System Memory – 2GB or 4GB DDR3L RAM Storage – 16GB to 128GB eMMC 5.1 flash Connectivity – Gigabit Ethernet transceiver (Atheros AR8033) Power Management – Rockchip RK808D PMIC 2x 120-pin board-to-board connectors (0.8mm pitch) with: Display: HDMI 2.0 port with audio for up to 4K @ 60Hz DisplayPort 1.2 with audio for up to 4K @ 60Hz MIPI-DSI (dual-channel) at up to 2560×1600 @ 60 Hz eDP 1.3 (4-lane) Camera – […]

February 6, 2018February 6, 2018 by Jean-Luc Aufranc (CNXSoft) - 40 Comments

Hardkernel Unveils ODROID-N1 Board with Rockchip RK3399 Processor, 4GB RAM, Dual SATA, and More

It’s official, there’s a bubble of Rockchip RK3399 boards announcements or launches in early 2018. After AAEON RICO-3399, Orange Pi RK3399, and Pine64 RockPro64, which add to 96Boards compliant Rock960 announced a couple a months ago, and which may launch in Q1 2018, Hardkernel has now announced they’ve been working on ODROID-N1 board. ODROID-N1 board specifications: SoC – Rockchip RK3399 hexa-core processor with a dual-core Arm Cortex-A72 @ 2GHz, a quad-core Arm Cortex-A53 @ 1.5Ghz, and a Mali-T860MP4 GPU that supports OpenGL ES1.1/2.0/3.0, OpenCL 1.2 System Memory 4Gbyte DDR3-1866 RAM, Dual channel interface for 64bit data bus width Storage – eMMC 5.0 (HS400) flash storage, UHS capable micro-SD slot., 2x SATA3 ports using, native SATA implementation via PCIe-gen2 to SATA3 interface Video Output – HDMI 2.0 for 4K display Connectivity – Gigabit Ethernet port USB – 2x USB 3.0 host ports, 2x USB 2.0 host port. Expansion – 40-Pin GPIO […]

January 30, 2018 by Jean-Luc Aufranc (CNXSoft) - 13 Comments

Linux 4.15 Release – Main Changes, Arm and MIPS Architectures

Linus Torvald has released Linux 4.15 last Sunday: After a release cycle that was unusual in so many (bad) ways, this last week was really pleasant. Quiet and small, and no last-minute panics, just small fixes for various issues. I never got a feeling that I’d need to extend things by yet another week, and 4.15 looks fine to me. Half the changes in the last week were misc driver stuff (gpu, input, networking) with the other half being a mix of networking, core kernel and arch updates (mainly x86). But all of it is tiny. So at least we had one good week. This obviously was not a pleasant release cycle, with the whole meltdown/spectre thing coming in in the middle of the cycle and not really gelling with our normal release cycle. The extra two weeks were obviously mainly due to that whole timing issue. Also, it is […]

January 29, 2018January 30, 2018 by Jean-Luc Aufranc (CNXSoft) - 36 Comments

Pine64 to Release RockPro64 Boards Based on Rockchip RK3399 and RK3399Pro for Around $60 and Up

Several Rockchip RK3399 boards have been announced in the last few days, first with AAEON RICO-3399 Pico-ITX single board computer targeting mostly business customers for digital signage, kiosk or, automation and Orange Pi RK3399, a featured-pack board with plenty of interfaces to play with. However those boards, and the one released previously, tend to cost between $100 and $200 or over, and even though we saw Rockchip SAPPHIRE evaluation board going for $75 its was a time-limited promotion, and the normal price is around $150. I’m pleased to report Pine64 will soon launch RockPro64 boards powered by Rockchip RK3399 or the recently announced RK3399Pro with an NPU for around $60 and up. There will be three versions of the board that will only differ by the processor, or RAM capacity: SoC (one or the other) Rockchip RK3399 hexa-core processor with 2x ARM Cortex A72 cores up to 2.0 GHz, 4x […]

January 29, 2018August 12, 2021 by Jean-Luc Aufranc (CNXSoft) - 30 Comments

Orange Pi RK3399 Development Board Launched for $109

Orange-Pi-RK3399-Board-Description-Large

Last Friday, I wrote there was already a decent choice of Rockchip RK3399 boards, and added AAEON RICO-3399 pico-ITX board to the list. I forgot about Shenzhen Xunlong’s own Rockchip RK3399 board that was spotted as early as last spring and was told Orange Pi RK3399 was now up for sale for around $110 (699 CNY) in Taobao. The board is now also for sale on Aliexpress for $109 plus shipping ($4.35 here), and the company has released the specifications, so we can have a better look at what the board has to offer. Orange Pi RK3399 specifications: SoC – Rockchip K3399 hexa-core big.LITTLE processor with two ARM Cortex A72 cores up to 2.0 GHz, four Cortex A53 cores, and an ARM Mali-T860 MP4 GPU with support for OpenGL 1.1 to 3.1 support, OpenVG1.1, OpenCL, and DX 11 System Memory – 2 GB DDR3 Storage – 16 GB eMMC flash, […]

January 26, 2018 by Jean-Luc Aufranc (CNXSoft) - 16 Comments

AAEON RICO-3399 Pico-ITX Board is Powered by Rockchip RK3399 / OP1 Processor

We now have a fair amount of boards powered by Rockchip RK3399 hexa-core processor with Firefly-RK3399, Rockchip Sapphire, VideoStrong VS-RD-RK3399, the upcoming 96boards compliant Rock960, among others. But AFAIK, none of those are designed to fit in a standard enclosure. AAEON will soon change that with an update of their RICO-3288 pico-ITX board, called RICO-RK3399 featuring Rockchip OP1/RK3399 processor combined with 2GB RAM, 16GB eMMC flash, HDMI 2.0, Gigabit Ethernet and more. AAEON RICO-3399 specifications: SoC – Rockchip RK3399 (OP1) hexa-core processor with two Cortex A72 cores up to 1.8 GHz, four Cortex A53 cores, and an Arm Mali-T860MP4 GPU System Memory – 2GB LPDDR3 Storage – 16GB eMMC flash, micro SD card slot Video Output / Display HDMI 2.0 port up to 4K UHD @ 60Hz eDP connector for LCD display up to 4K UHD @ 60 Hz I2C/USB header for touch panel Audio – Via HDMI, 2.5W (by 4Ω) speaker/ […]

January 17, 2018January 17, 2018 by Jean-Luc Aufranc (CNXSoft) - No Comments

ZidooLab OPS Android Digital Signage Players are Powered by Rockchip RK3368 or Realtek RTD1295 SoC

Zidoo is known for their Arm based Android TV boxes targeting the consumer market, but the company also runs ZidooLab for the B2B market, and especially digital signage application, which may explain why they release a digital signage SDK a while ago. The company can customize hardware and software for their customer’s needs, but what caught my intention is that they have Arm based digital signage players that comply with OPS (Open Pluggable Specification) that was first released by Intel in 2010, and defines electrical, mechanical and thermal specifications of OPS compliant devices which are meant to be plugged into compliant monitors. ZidooLab has currently two Android OPS hosts: A1 & A2 that share most of the same specifications, except for the processor, and some I/Os: SoC A1 – Rockchip RK3368 octa-core Cortex A53 processor up to 1.5 GHz, PowerVR G6110 GPU A2 – Realtek RTD1295 quad core Cortex A53 […]

January 8, 2018January 8, 2018 by Jean-Luc Aufranc (CNXSoft) - 17 Comments

Rockchip RK3399Pro SoC Integrates a 2.4 TOPS Neural Network Processing Unit for Artificial Intelligence Applications

Rockchip RK3399 (aka OP1) SoC was launched in 2016 with an hexa core Arm Cortex A72/A53 processor, Mali-T860MP4 GPU, support for 4K video decoding, and high speed interfaces like USB 3.0 and PCIe, as well as Gigabit Ethernet. The processor is found in Chromebooks, TV boxes, development boards, and other devices. The company has unveiled an upgraded “Pro” version of the processor at CES 2018. Rockchip RK3399Pro appears to have most of the same features as its predecessor but adds a neural network processing unit (NPU) delivering up to 2.4 TOPS for artificial intelligence and deep learning applications. The company claims that compared to traditional solution, the computing performance of typical deep neural network Inception V3, ResNet34 and VGG16 models on RK3399Pro is improved by almost one hundred times, and power consumption is less than 1% than A.I. solutions implemented using GPU acceleration. Based on the information provided in the […]