Video Category - Page 56 of 331 - CNX Software

August 17, 2022 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

Elecrow’s Raspberry Pi Pico Advanced Kit ships with 32 electronics modules, 32 project tutorials

We’ve just reviewed the Raspberry Pi 4-powered CrowPi L laptop and Crowtail Starter kit used to teach programming and electronics, but Elecrow has now launched the “Raspberry Pi Pico Advanced Kit” with 32 electronics modules, a smart kit car, and 32 tutorials that should be a more affordable way of teaching electronics and programming. However, it does so in a different way, as instead of using visual programming and Python, the Raspberry Pi Pico Advanced Kit’s lessons rely on MicroPython, and the projects are different with for example parts to build an obstacle avoidance, line tracking, or remote controlled car. Package content: Optional Raspberry Pi Pico board with Raspberry Pi RP2040 dual-core Cortex-M0+ microcontroller Breadboards 2x 400 holes solderless breadboards 1x 170 holes solderless breadboard Display modules 1602 LCD display module (Blue) OLED module 4-bit digital LED display module Lights 10x 5mm LEDs in green, red, blue, yellow, and […]

August 17, 2022February 3, 2023 by Jean-Luc Aufranc (CNXSoft) - 8 Comments

Nordic Semi nRF7002 is a dual-band WiFi 6 companion IC for nRF52, nRF53, and nRF91 wireless chips

Nordic Semiconductor nRF7002 dual-band WiFi 6 companion chip is the first WiFi chip from the company and is designed to add Wi-Fi connectivity to solutions based on nRF52840 and nRF5340 wireless SoCs, and nRF9160 cellular IoT SiP, as well as non-Nordic host microcontrollers. The nRF7002 also adds Wi-Fi-based locationing (SSID sniffing of local Wi-Fi hubs) when used alongside Nordic’s existing products, and the launch means Nordic is now one of the rare companies offering chips for Bluetooth, 802.15.4 (Matter/Thread), Wi-Fi, and cellular IoT (NB-IoT, LTE Cat M). This was made possible with the acquisition of the development team, core Wi-Fi expertise, and Wi-Fi IP assets of Imagination Technologies Group in 2020. Nordic Semi nRF7002 key features specifications: Complies with 802.11a/b/g/n/ac/ax 2.4 GHz and 5 GHz dual-band Wi-Fi 6 Station (STA) 1 Spatial Stream (SS) 20 MHz channel bandwidth 64 QAM (MCS7), 86 Mbps PHY throughput OFDMA (Downlink and Uplink) BSS […]

August 16, 2022January 17, 2023 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

myBuddy 280 dual arm robot features Raspberry Pi 4 SBC and ESP32 controllers

Elephants Robotics myBuddy 280, aka myBuddy 280 Pi, is a dual-arm collaborative robot for education with a 7-inch display powered by Raspberry Pi 4 SBC, and also features three ESP32-based M5Stack core modules that help with the internal communication between the motors and the Raspberry Pi board. It builds upon the earlier myCobot 280 Pi robot with a single arm, with the same 280mm working range, but the new robot offers two arms, and a total of 13 degrees of freedom (DoF). The robot is also equipped with two 2MP HD cameras for computer vision, a standard 3.3V expansion I/O interface, a LEGO expansion interface, and can be fitted with a variety of adapters such as suction pumps, grippers, little hands (see below), etc… myBuddy 280 specifications: SBC – Raspberry Pi 4 (2GB or 4GB RAM) single board computer to control the display and communicate with the ESP32 modules IoT […]

August 15, 2022August 15, 2022 by Sponsored Post - Comments Off

OPS-compliant digital signage player features Amlogic S905X3 CPU (Sponsored)

DataMax DM29 is a digital signage player and mini PC compliant with the OPS (Open Pluggable Specification) standard and powered by an Amlogic S905X3 quad-core Cortex-A55 processor coupled with 4GB RAM and 32GB internal storage. The Android 9 system also features an HDMI 2.1 port capable of up to 4Kp60 video output, Gigabit Ethernet, dual-band WiFi, and 3G or 4G LTE cellular connectivity, as well as a pair of USB 3.0 ports. The system can be powered from an OPS-compliant display or via PoE. DataMax DM29 specifications: SoC – Amlogic S905X3 quad-core Arm Cortex-A55 processor @ up to 1.9 GHz with Arm Mali-G31 MP2 GPU supporting OpenGL ES 3.2, Vulkan 1.0, OpenCL 2.0 System Memory – 4GB dual-channel LPDDR4 or DDR3 Storage – 32GB eMMC flash, microSD card socket, M.2 SSD socket Video & audio output – HDMI 2.1 up to 1080p120 or 4Kp60 Video Decoding – 10-bit H.265, VP9, […]

August 12, 2022October 30, 2022 by Jean-Luc Aufranc (CNXSoft) - 7 Comments

SONOFF NSPanel Pro Android control panel doubles as WiFi & Zigbee Smart Home gateway

ITEAD has introduced the SONOFF NSPanel Pro Smart Home control panel running Android 8.1 on a Rockchip PX30 quad-core Cortex-A35 processor and acting as a Smart Home gateway thanks to an 802.15.4 radio for Zigbee 3.0, and 2.4 GHz 802.11b WiFi for connectivity. The NSPanel Pro follows the ESP32-powered SONOFF NSPanel introduced just last year but offers much more flexibility with Android, 2GB RAM, 8GB eMMC flash, and also offers a slightly larger 3.95-inch capacitive touchscreen display with 480×480 resolution. SONOFF NSPanel Pro specifications: SoC – Rockchip PX30 quad-core Cortex-A35 processor with Arm Mali-G31 GPU System Memory – 2GB DDR3 Storage – 8GB eMMC 5.1 flash Display – 3.95-inch capacitive touchscreen color TFT display with 480×480 resolution Audio – 1W speaker, digital microphone for two-way communication (intercom) Connectivity 802.15.4 radio with Zigbee 3.0 support. Matter and BLE Mesh scheduled for 2023 2.4 GHz 802.11b WiFi Sensor – Light sensor for […]

August 11, 2022 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

AquaPing is an open-source, battery powered acoustic water leak detector module (Crowdfunding)

The AquaPing is an open-source hardware, ultra-low power acoustic water leak detector sensor based on Texas Instruments MSP430 microcontroller and a microphone that can detect leaks without having to do any plumbing, instead capturing audio for water leak detection, and it even works for leaks behind walls. All signal processing and analysis occur on the MSP430 MCU, so no audio is streamed to the cloud and eavesdropping is impossible, plus the sensor only captures high frequencies out of the range of normal conversations, so eavesdropping is not feasible, plus those higher frequencies are also said to provide highest sensitivity and reliability. AquaPing specifications: MCU – Texas Instruments MSP430FR5994 microcontroller to perform FFT spectral analysis (10x faster/efficient than ARM-Cortex M0+) Audio capture – MEMS microphone covered by a small rectangular plastic structure to form a Helmholtz resonator. Minimum detectable leak rate – 0.01 gpm (gallon per minute) depending on stand-off distance […]

August 8, 2022August 8, 2022 by Sponsored Post - Comments Off

23.8-inch touch screen system with EDLA GMS for sports, healthcare, education, advertising, and home appliances (Sponsored)

23.8-inch touch screen system arm VESA mount

DataMax DP03F touch screen system comes with a 23.8-inch Full HD touchscreen display with anti-bacterial plastics and healthcare-certified components and runs Android 11 on an hexa-core Arm processor, either Rockchip RK3399 Arm Cortex-A72/A53 SoC or Amlogic A311D Arm Cortex-A73/A53 processor. This type of touch screen system can be used as a medical bedside terminal, digital signage, conference terminal, treadmill terminal, smart PoS, industrial panel PC, robots, and more. It would typically be mounted on the device itself, or in the case of hospital settings a VESA-compatible flexible arm to provide the patient with easy access to entertainment and education, while doctors, nurses, or the patient him/herself can check out clinical records and vital signs. DataMax DP03F specifications: SoC (one or the other) Rockchip RK3399 hexa-core processor with 2x Cortex-A72 cores @ up to 1.8 GHz, 4x Cortex-A53 cores @ up to 1.4 GHz with Mali-T860 GPU Amlogic A311D hexa-core processor […]

August 8, 2022 by Jean-Luc Aufranc (CNXSoft) - 16 Comments

ESP-WIFI-CSI detects humans with WiFi signals only, no sensor needed

Espressif ESP-WIFI-CSI software relies on the disturbance in the force WiFi signals between one or more ESP32 boards and a router to detect whether humans are present in a room, or even indoor positioning, providing a cost-effective solution since no sensors are needed. Channel state information (CSI) leverages carrier signal strength, amplitude, phase, and signal delay indicators to reveal the signal scattering, reflection, and power attenuation phenomena that occur with the carrier as the transmission distance changes. This is typically used to measure the channel status of the wireless network in Wi-Fi communication, but it’s also possible to analyze and study the changes in CSI to detect movements such as walking and running of people or animals, and Espressif claims it can also capture subtle movements caused by small movements such as breathing and chewing of people or animals in a static environment. ESP-WIFI-CSI implementation works with all ESP32 series […]