alexa

Posted on by Debashis Das - 1 Comment on 86-type Smart Home control panel features a 3.5-inch display, physical buttons, Bluetooth SIG Mesh gateway

86-type Smart Home control panel features a 3.5-inch display, physical buttons, Bluetooth SIG Mesh gateway

Tuya WiFi 3.5 inch Smart Center Control Panel

The Tuya WiFi 3.5-inch Smart Center Control Panel (CCP-S05) is designed to replace traditional 86-type switches while adding a Bluetooth SIG Mesh gateway, a touchscreen interface, and three buttons for smart homes, apartments, and small commercial spaces. Compared to other 86-type control panels such as the Luckfox-Pico-86-Panel, Dusun DSGW-130, and Waveshare’s ESP32-P4 Smart 86 Box, the Tuya device follows a hybrid approach, combining a capacitive touchscreen with three physical buttons for instant local control. Tuya WiFi 3.5-inch Smart Center Control Panel (CCP-S05) specifications: SoC – Unknown (potentially based on Allwinner F1C100s ARM9 application processor, slightly more powerful Rockchip or Allwinner SoC) Display – 3.5-inch capacitive touchscreen Audio – Built-in microphone and speaker Networking Wi-Fi (2.4 GHz) Bluetooth Mesh USB – USB Type-C port for debugging only Relays – 3x independent relay channels (200 W per channel max 600W) Misc 3x programmable physical buttons Reset button (on the bottom side) RTC […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 1 Comment on eWeLink CUBE OS enables all SONOFF WiFi and Zigbee devices to connect to Matter

eWeLink CUBE OS enables all SONOFF WiFi and Zigbee devices to connect to Matter

SONOFF WiFi Zigbee Matter Compatibility

All SONOFF WiFi and Zigbee home automation devices can now work with the Matter protocol. This can be done in two ways: Software path (free of charge)  – Use eWelink CUBE OS on a Raspberry Pi or other host computer to bridge SONOFF WiFi & Zigbee devices to Matter. Hardware path — Install a certified Matter gateway such as SONOFF iHost, ZBBridge-U, or NSPanel Pro, and pair your WiFi/Zigbee devices to use them with Matter. The main benefit is that you no longer need to use the eWelink app, and any SONOFF devices can now work with Matter-compatible platforms, such as Apple Home, Google Home, SmartThings, Amazon Alexa, and Home Assistant. I’ll focus on the software solution in this post. Most users will likely install eWelink CUBE OS on a Raspberry Pi 4/5 connected to a supported USB Zigbee dongle if they have Zigbee devices. SONOFF lists their own ZBDongle-MAX, […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 1 Comment on ReSpeaker XMOS XVF3800 4-mic array board features ESP32-S3 module, also works over USB

ReSpeaker XMOS XVF3800 4-mic array board features ESP32-S3 module, also works over USB

ReSpeaker XMOS XVF3800 with XIAO ESP32S3

Seeed Studio’s “ReSpeaker XMOS XVF3800 with XIAO ESP32S3” board is a 4-mic array board with XMOS XVF3800 voice processor and ESP32-S3 wireless MCU for standalone operation, but it can also be used as a USB microphone array for computers and SBCs. The Respeaker mic array family was first introduced in 2016, and new models have been launched over the years, like the ReSpeaker Core v2 and ReSpeaker Lite Series, with audio improvements and different feature sets. The ReSpeaker XMOS XVF3800 with XIAO ESP32S3 is the latest variant, and Seeed Studio claims it offers a “clearer voice capture, even in noisy environments.” ReSpeaker XMOS XVF3800 with XIAO ESP32S3 specifications: Wireless module – XIAO ESP32S3 Wireless MCU – Espressif Systems ESP32-S3R8 CPU – Dual-core Tensilica LX7 microcontroller @ 240 MHz Memory – 512KB SRAM, 8MB PSRAM Wireless – Wi-Fi 4 & Bluetooth 5.0 dual-mode (classic + BLE) connectivity Storage – 8MB SPI […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 5 Comments on SONOFF SNZB-02LD and SNZB-02WD IP65-rated Zigbee LCD Smart thermometers work with liquids or outdoors

SONOFF SNZB-02LD and SNZB-02WD IP65-rated Zigbee LCD Smart thermometers work with liquids or outdoors

SONOFF SNZB-02LD IP65 Zigbee LCD Thermometer

ITEAD has introduced two new SONOFF devices: the IP65-rated SNZB-02LD and SNZB-02WD Zigbee 3.0 LCD Smart thermometers designed to work in liquids or enclosed spaces such as bathtubs or refrigerators, or outdoors in gardens or other humid environments, respectively. Both devices look similar and can measure temperature with +/- 0.5°C accuracy, but the SONOFF SNZB-02LD model ships with a 1.5m long probe to measure the temperature of liquids in a pool, a bathtub, or fermentation vessel (for beer or wine making), as well as in refrigerators. On the other end, the SNZB-02WD features a built-in temperature and humidity sensor. SONOFF SNZB-02WD/LD specifications: MCU – Telink TLSR8656F512ET32 (part of the TSL8656 family – See PDF datasheet ) Zigbee/RF4CE SoC with 32-bit RISC MCU, 64kB SRAM, 512kB internal Flash Display – 2.2-inch LCD Wireless – Zibgee 3.0 (802.15.4 radio on TSL8656) Temperature and Humidity sensor SNZB-02WD (internal) Temperature Range – -20°C to […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 1 Comment on Xcrhom T4S WiFi outdoor smart socket features power meter function, Tasmota open-source firmware

Xcrhom T4S WiFi outdoor smart socket features power meter function, Tasmota open-source firmware

Xcrhom T4S Tasmota outdoor wifi smart socket

ESPHome is the favorite open-source firmware of Smart Home devices, but Tasmota is another option that’s been available for many years. We’ve just seen fewer products based on Tasmota (previously Sonoff-Tasmota) in recent years, but it recently showed up on a credit card-sized quad relay board, and I’ve just come across Maker Go’s Xcrhom T4S WiFi Outdoor Smart Socket that also ships with Tasmota firmware and sells on AliExpress for $24.88 shipped. The Xcrhom T4S exposes two sockets with dust and rainproof covers to be used safely outdoors, integrates a power meter, and the Tasmota firmware enables MQTT support, Home Assistant compatibility, and support for Amazon Alexa and Google Assistant. Xcrhom T4S specifications: Two EU sockets Max load – 3680W in total (16A x 230V) Rated Current – Up to 16A in total Power Input – 100 to 240V AC 50Hz Wireless – 2.4 GHz 802.11b/g/n WiFi 4; Tx power […]

Posted on by Paisit Wongsongsarn - 7 Comments on SONOFF MINI-D Review – A Matter-enabled dry contact WiFi switch tested with eWeLink, Home Assistant, and Apple Home

SONOFF MINI-D Review – A Matter-enabled dry contact WiFi switch tested with eWeLink, Home Assistant, and Apple Home

SONOFF MINI-D Review

SONOFF sent us a sample of the MINI-D Wi-Fi smart switch with a dry contact design for review. If you’re familiar with the larger SONOFF 4CH Pro model, which features four channels, the MINI-D operates similarly but is smaller in size and comes with the latest software features. The principle of a dry contact is that the relay contacts are not directly connected to the device’s power supply circuit. Instead, the contacts are isolated and require an external power source to supply power to the load. Make it flexible to use the SONOFF Mini-D in various scenarios such as controlling garage doors, thermostats, or high-current electrical devices through a contactor, like water pumps. It can also manage low-power DC devices such as solenoid valves or small electric motors (<8W). Because the power supplied to the MINI-D and the power passed through its relay can come from different sources, it offers […]

Posted on by Debashis Das - 1 Comment on GGBEE RMW002 WiFi AC smart switch supports Alexa, Google Assistant, and Cozy Life app

GGBEE RMW002 WiFi AC smart switch supports Alexa, Google Assistant, and Cozy Life app

GBEE mini wi fi smart switch

The GGBEE RMW002 is a mini WiFi AC smart switch designed to make your appliances smarter. It supports a voltage range of 100-240V AC and a maximum current of 16A/20A. With built-in WiFi, the switch connects to the Cozy Life app for easy remote control of your appliances. It also supports voice commands through Amazon Alexa and Google Assistant allowing for hands-free operation. Additional features include group control, countdown timers, and dual-control wiring options. The device has very similar from-factor and features to that of a SONOFF ZBMINIR2 or  SONOFF MINI Extreme (MINIR4M) but there are significant price differences if you are comparing the RMW002  to any SONOFF devices since the GGBEE switch is quite cheaper. GGBEE RMW002 specifications: SoC – Boufallo Lab BL602 32-bit RISC-V wireless SoC Connectivity – 802.11 b/g/n Wi-Fi 4 via BL602 Input Voltage range – 100-240V AC (50/60Hz) Max Current: 16A or 20A depending on […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 2 Comments on Quectel FLM263D 2.4 GHz WiFi 6 and BLE 5.2 RISC-V module supports Amazon Alexa Connect Kit (ACK) SDK for Matter

Quectel FLM263D 2.4 GHz WiFi 6 and BLE 5.2 RISC-V module supports Amazon Alexa Connect Kit (ACK) SDK for Matter

Quectel FLM263D WiFi 6 Smart Home module

Quectel Wireless FLM263D is a standalone WiFi 6 and Bluetooth 5.2 LE module with a 320 MHz RISC-V microcontroller that supports Alexa Connect Kit (ACK) SDK for Matter for connectivity with Amazon Alexa, Google Home, Samsung SmartThings, Apple HomeKit, and other Matter-compliant Smart Home devices. The module also implements security standards such as secure boot and Mbed TLS encryption. The FLM263D offers certifications such as Works with Alexa (WWA) and supports features such as Matter Simple Setup (MSS) that allows zero-touch setup of Matter-compliant smart home devices through Alexa. Quectel FLM263D specifications: MCU – RISC-V wireless microcontroller up to 320 MHz, with 512KB SRAM and 4MB flash (likely Beken BK7235) Wi-Fi 6 & BLE 5.2 WLAN Protocol – IEEE 802.11b/g/n/ax Wi-Fi Frequency Band – 2.4 GHz Wi-Fi Modulation Mode – CCK, BPSK, QPSK, 16QAM, 64QAM Wi-Fi Operating Mode – AP, STA, STA + AP WiFi Rx sensitivity – Up to […]

Exit mobile version