audio News - Page 20 of 22 - CNX Software

September 28, 2016September 28, 2016 by Jean-Luc Aufranc (CNXSoft) - 6 Comments

Tbee Android TV Box Supports Voice Command and Gesture Control

The first thing you notice with Tbee TV box is the beehives inspired hexagonal enclosure, as we’ve already seen with T95Z Plus TV box, but the features that really stand out are voice command, and especially gesture control thanks to the built-in microphone and camera. Tbee TV box specifications: SoC – Amlogic S812 quad core Cortex A9r4 processor @ up to 1.99 GHz with octa-core Mali-450MP GPU System Memory – 2GB Storage – 8GB eMMC flash + SD card slot Video & Audio I/O – HDMI input, HDMI output Connectivity – 10/100M Ethernet, WiFi 802.11 b/g/n (2.4 GHz) and Bluetooth 4.0 USB – 2x USB 2.0 host ports Misc – IR receiver, built-in HD ready camera and IR receiver Dimensions – 28.5 x 8.5 cm (full package) Weight – 860 grams (full package) The box ships with an air mouse with QWERTY keyboard and its RF dongle, a HDMI cable, […]

September 20, 2016October 6, 2019 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

$16 and Up RGB LED Bluetooth 4.0 Light Bulbs include Speakers

I’ve just stumbled upon “H1007 Smart E27 Bulb Bluetooth 4.0 Speaker” on GeekBuying. It’s a smart Bluetooth 4.0 RGB LED E27 light bulb that also include a speaker, and sells for $22.59 shipped. I find it’s a good idea, and after looking for other models, I’ve found the $99 Twist light, as well as a much cheaper “OY-QP-BM13” model on eBay going for $15.99. I’ll look at (HZ-)H1007 specifications first: Light Bulb 5W; adjustable RGBW; 330 Lumens; Color temp: 6500K Screw Type – E27/E26 Connectivity – Bluetooth 4.0 LE up to 20 meters range Audio – 3W amplifier; 3D surround audio Voltage – 100 to 240V 50/60Hz Dimensions – 72 mm diameter x 136 mm length Weight – 146 grams The body of the light bulb is available in white, red, golden, and blue, and it ships with a user’s manual in English and Chinese. I could not find the […]

September 16, 2016 by Jean-Luc Aufranc (CNXSoft) - 7 Comments

Kodi 17 Setup and Audio/Video Support in Amlogic S912 TV Boxes (as of September 2016)

Most people installing Kodi are going to select Kodi 16.1 as of today, since it is the latest stable release. But I’m currently reviewing Qintaix Q912 TV box based on Amlogic S912 octa-core processor, whose Android 6.0 firmware includes Kodi 17 Alpha 3, so since that’s the first time I run Kodi 17 “Krypton”. I’ve decided to report my experience about the interface, and the current status about audio and video support by testing some 4K videos, and audio files. I used the latest available firmware for the test. Kodi 17 can be found on the main launcher, and for the first launch, we’ll see the default skin has been replaced from Confluence to the new Estuary skin. It’s a little confusing a first. We can access the setup menu by going to the icon on the bottom left, just on the right on the power button, and then select […]

September 14, 2016July 31, 2020 by Jean-Luc Aufranc (CNXSoft) - 12 Comments

Widora-NEO OpenWrt WiFi IoT & Audio Board is Based on Mediatek MT7688 SoC, WM8960 Audio DAC

A couple of weeks ago, I reviewed ReSpeaker board combining MediaTek MT7688 WiFi SoC with WM8960 audio DAC, running OpenWrt, and allowing you to perform tasks using text-to-speech and speech-to-text thanks to the built-in microphone (or optional microphone array), and a 3.5mm audio jack to connect speakers, as well as several I/O pins. It turns out there’s been board with similar features, minus the built-in microphone, available in China for a while. Meet Widora-NEO. Widora-NEO board specifications: SoC – Mediatek MT7688AN MIPS SoC @ 580 MHz with built-in WiFi System Memory – 128 MB RAM Storage – 16MB SPI flash, micro SD card Connectivity – 10/100M Ethernet, 802.11 b/g/n WiFi 1T1R up to 150 Mbps with PCB antenna, or IPEX connector Audio – 3.5mm jack for stereo headphone and mono microphone, WM8960G audio codec USB – 1x micro USB port for programming via CP2104 chip, 1x micro USB host (or […]

September 6, 2016September 6, 2016 by Jean-Luc Aufranc (CNXSoft) - 5 Comments

UNI-T UT353 is a $15 Lightweight Sound Level Meter

Since some of the products I review come with a fan, I checked some sound level meters a couple of years ago, but since they were a little too expensive for my limited use, I skipped for the time being. However, while browsing some promotions or new arrivals on DealExtreme, I’ve come across UNI-T UT355 “Noise Detector Decibel Noise Tester” which sells for $15.56 including shipping. UNI-T UT353 mini sound meter specifications: Noise Levels & Accuracy – 30 to 130 dB with 0.1 dB resolution, +/- 1.5 dB accuracy Sample rate – Fast: 125ms; Slow: 1 second Measurement features – MAX/MIN, Data hold, overload indication (OL) Display – 1.64″ LCD display with backlight Buttons – Power, FAST/SLOW selection, MAX/MIN/normal selection, HOLD/BL for data hold (short press) or turning on/off the backlight (long press) Power Supply – 3x AAA batteries; 5 minutes auto power off Power Consumption – Active: < 40 […]

September 3, 2016November 25, 2016 by Jean-Luc Aufranc (CNXSoft) - 11 Comments

Allo Sparky Audio Kit Combines an ARM Linux Board with Amplifier, Audio DAC, Reclocker and Capacitance Multiplier Boards

Last year I wrote about Allo Sparky SBC Linux and Android development powered by Actions Semi S500 quad core Cortex A9 processor, which mostly differentiates itself from the competition by the many add-on boards for audio, VoIP, and IoT (WiFi+Bluetooth+Zigbee ). While most of development boards are manufactured in China, Allo company is based in India, and all boards are manufactured there, which could be a benefit to Indian readers who want to avoid potential custom issues with other boards. The company has shipped me their complete audio development kit, and I’ll first check out the hardware, before taking time to experiment with the kit in a few weeks or months… I could find 6 different boards in the kit, which I detailed below, as well as a 5V/3A power supply with AU and EU adapter, a micro USB adapter, a micro SD card apparently pre-loaded with Ubuntu 12.04, a […]

August 24, 2016August 27, 2016 by Jean-Luc Aufranc (CNXSoft) - 4 Comments

ReSpeaker WiFi IoT Board is Designed for Voice Interaction (Crowdfunding)

More and more devices are supporting voice interaction nowadays from your smartphone to devices like Amazon Echo, but so far, I had not seen development boards specifically designed for that purpose, and that’s exactly what Seeed Studio ReSpeaker board does by combining audio capabilities, WiFi connectivity, and I/O headers. ReSpeaker Core board specifications: WiFi Module – Acsip AI7688 Wi-Fi 802.11 b/g/n module based on Mediatek MT7688 MIPS SoC Storage – micro SD card slot USB – 1x micro USB port for programming and power Audio – 3.5mm AUX port, WM8960 audio codec, 2-pin header for external speakers Expansion – 2x 8-pin expansion headers for I2C, GPIO and USB 2.0 host connected to MT7688, built-in microphone. MCU – Atmel ATMega32U4 @ 16 MHz Misc – 12x RGB LEDs, 8x touch sensors, 3 push buttons Power Supply – 5V DC Dimensions – 70mm diameter Weight – 70 grams The board runs OpenWrt, […]

July 26, 2016July 27, 2016 by Jean-Luc Aufranc (CNXSoft) - 6 Comments

Music802 Linux Audio & IoT Board is Powered by Atheros AR9331 SoC (Crowdfunding)

When Link Card evaluated processors for a Linux audio IoT board, they considered candidates like Allwinner H3 and Ralink RT5350, but eventually went with Atheros AR9331 due to cost, simplicity, features, and power consumption reasons for their Music802 board based on LC930 system-on-module. Music802 board specifications: SoC – Atheros AR9331 MIPS 24K WiSoC @ 400 MHz System Memory – 64MB DDR2 Storage – 16MB SPI Flash Audio – Cirrus Logic WM8960 Codec; 2x 3.5 mm jacks for Line IN and headphone; optical S/PDIF output; on-board microphone Connectivity – 2x 10/100M Ethernet ports (WAN & LAN), 802.11 b/g/n WiFi with 1x IPEX antenna connector USB – 1x USB 2.0 host, 1x micro USB port for power only Debugging – 3-pin 2.54mm pitch header for serial console Expansion – 16-pin 2.0mm pitch header for GPIO, UART, I2C, etc.. Misc – Power, system, and 2x user LEDs, 1x reset button, 1x power switch […]