avnet News - Page 2 of 4 - CNX Software

June 24, 2021June 24, 2021 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

Avnet AVT9152 – nRF52840 & nRF91 IoT module and devkit

Avnet AVT9152 is an IoT module and development kit that combines two Nordic Semi wireless solutions, namely nRF52840 Bluetooth 5.2/LE multiprotocol SoC and nRF91 IoT cellular system-on-module with NB-IoT, LTE-M, and GPS connectivity. The module supports Avnet’s enterprise-ready IoTConnect Platform, and the development kit combines with IoT module with a 3-axis accelerometer, a 3-axis gyroscope, as well as pressure, temperature, relative humidity, ambient light, and motion (PIR) sensors to help with the development of IoT applications such as tracking devices, vending machines, points-of-sale, smart buildings, industrial IoT, and more. Avnet AVT9152 module – nRF52840 + nRF91 Key features and specifications: Wireless SoC/SiP Nordic Semi nRF9160 Cortex-M33 based system-in-package (SiP) with LTE-M/NB-IoT global carrier certification for LPWAN connectivity; support for power save mode, PSM and eDRX Nordic Semi nRF52840 Cortex-M4F microcontroller with Bluetooth 5.0 and Bluetooth LE for short-range communication Flexible LTE and GPS antenna options 50x castellated holes with UART, […]

February 17, 2021February 18, 2021 by Jean-Luc Aufranc (CNXSoft) - 3 Comments

MaaXBoard Nano SBC targets audio and edge IoT with NXP i.MX 8M Nano SoC

Avnet has launched several Raspberry Pi-inspired MaaXBoard SBCs based on NXP i.MX processors through their Embest subsidiary starting in 2019 with MaaXBoard single board computer powered by an NXP i.MX 8M processor, and following by MaaxBoard Mini with NXP i.NX 8M Mini SoC in 2020. The latest model is MaaXBoard Nano SBC with an NXP i.MX 8M Nano quad-core Cortex-A53 processor best suited to audio and edge IoT applications. MaaxBoard Nano SBC specifications: SoC – NXP i.MX 8M Nano quad-core Arm Arm Cortex-A53 processor @ up to 1.5GHz with Cortex-M7F core @ 750MHz, 2D GPU, 3D GPU, but no video hardware decoding. System Memory -1GB DDR4 SDRAM Storage – 16GB eMMC flash, 256 Mbit QSPI Flash, MicroSD Slot Display Interface – MIPI DSI display Interface Audio – 3.5mm audio jack, 4x built-in microphones Camera I/F – MIPI CSI Camera Interface Networking – Gigabit Ethernet, 802.11 b/g/n/ac WiFi 5, Bluetooth 4.2/5 […]

September 20, 2020September 20, 2020 by Jean-Luc Aufranc (CNXSoft) - 10 Comments

Raspberry Pi inspired MaaxBoard Mini SBC features NXP i.MX 8M Mini SoC

Last year, Embest – an Avnet company – introduced MaaXBoard NXP i.MX 8M SBC mostly compatible with Raspberry Pi form factor and running Android 9.0 or Yocto Linux. The company has now launched MaaXBoard Mini with a 14nm NXP i.MX 8M Mini quad-core processor. In some ways, the new board follows more closely Raspberry Pi 3 Model B form factor with four USB 2.0 ports, instead of the two USB 3.0 ports found in the first version of the board, but it does so without HDMI output, leaving MIPI DSI as the only option for display output. MaaxBoard Mini (AES-MC-SBC-IMX8MINI-G) specifications: SoC – NXP i.MX 8M Mini Quad with 4x Arm Cortex-A53 cores @ up to 1.8GHz, Cortex-M4F real-time core @ 400MHz, Vivante GCNanoUltra 3D GPU and GC320 2D graphics, 1080p H.264/H.265 VPU; System Memory – 2GB DDR4 Storage – eMMC socket for up to 64GB flash, MicroSD slot Display […]

August 27, 2020August 27, 2020 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

Monarch Go Pi HAT Adds LTE Cat M1 Connectivity to Raspberry Pi Board

After introducing Renesas ZMOD4410 Indoor Air Quality HAT for Raspberry Pi earlier this month, Avnet is back with another Raspberry Pi HAT namely Monarch Go Pi HAT that adds LTE Cat M1 connectivity to Raspberry Pi boards and other compatible SBC’s with a 40-pin GPIO header. The expansion board gets its name from Sequans Monarch Go LTE-M modem itself based on the Sequans Monarch GM01Q LTE IoT module that supposed to support both LTE Cat M1 (eMTC) and NB-IoT. The solution is certified by various operators in North America, Europe, and Asia, and ships with a Verizon ThingsSpace IoT SIM. Monarch Go Pi HAT specifications: LTE IoT Connectivity Sequans Monarch Go LTE modem with Cat-M1 (& NB-IoT?) connectivity Pre-installed Verizon ThingsSpace IoT SIM USB – Micro USB port for debugging and programming Expansion MikroElektronika shuttle click site with 3.3V I/O: I2C, SPI, GPIO, UART Voltage I/O translator – 1.8V to […]

April 6, 2019 by Jean-Luc Aufranc (CNXSoft) - 4 Comments

Avnet Azure Sphere MT3620 Starter Kit Features Two mikroBUS Sockets

Microsoft and MediaTek worked together to design MediaTek MT3620 Arm Cortex-A7 processor with Microsoft Pluton security sub-system required for Microsoft Azure Sphere IoT ecosystem. We’ve already covered boards from Seeed Studio including the just announced low cost MT3620 mini dev board. But Microsoft also cooperated with Avnet which has recently introduced Azure Sphere MT3620 Starter Kit equipped with two mikroBUS sockets enabling the platform to leverage one of the 633 “click boards” available from MikroElektronika. Just like the latest Seeed Studio board, Avnet Azure Sphere MT3620 Starter Kit is comprised as a baseboard with a soldered-on CPU module that can later be used for mass-production is a custom designed board. Specifications: Azure Sphere MT3620 CPU Module Mediatek MT3620AN single core Arm Cortex-A7 processor @ 500 MHz with 4MB SRAM, dual core Arm Cortex-M4F real-time core @ 200 MHz with 64KB RAM, Microsoft Pluton security sub-system, and WiFi. Storage – TBD […]

March 28, 2019 by Jean-Luc Aufranc (CNXSoft) - No Comments

Ultra96-V2 96Boards AI Platform Adds Certified WiFi, PMICs, Industrial Temperature Range

Avnet Ultra96 was unveiled last year as one of the four 96Boards AI platforms designed to develop applications leveraging hardware to accelerated artificial intelligence workloads. The 96Boards CE compliant board comes with a Xilinx Zynq UltraScale+ MPSoC, 2GB RAM, a 16GB microSD card, WiFi and Bluetooth connectivity and more. The company has now launched an upgraded version with Ultra96-V2 featuring most of the same specifications but with a WiFi & Bluetooth module certified in 75 countries, industrial temperature range, and Infineon’s PMIC’s for additional power control and monitoring. Ultra96-V2 specifications: SoC – Xilinx Zynq UltraScale+ MPSoC ZU3EG A484 with four Cortex A53 cores, two Cortex-R5 core, Arm Mali-400MP2 GPU, and FPGA Fabric System Memory – 2 GB (512M x32) LPDDR4 Memory Storage – 16 GB MicroSD card + adapter pre-loaded with PetaLinux environment Video Output – Mini DisplayPort (MiniDP) Connectivity – Microchip ATWILC3000 certified 802.11 b/g/n WiFi 4 / Bluetooth […]

February 23, 2019February 23, 2019 by Jean-Luc Aufranc (CNXSoft) - 3 Comments

Avenger96 96Boards CE Extended Board Features an STMicro STM32MP1 SoM

STMicro unveiled the first STM32 microprocessor – as opposed to microcontroller – earlier this week with STM32MP1 adding one or two Cortex-A7 cores running Linux to the Cortex-M4F core usually found in STM32 microcontrollers. The company also announced their own evaluation kits and discovery kits but promised a 96boards compliant board and system-on-module would be showcased at Embedded World 2019. But Arrow Electronics has already released some limited information about a 96boards CE extended compliant STM32MP1 powered SBC called Avenger96 and that happens to be designed with a baseboard and an STM32MP157 system-on-module. Avenger96 preliminary specifications: SoC – STMicro STM32MP157 dual Arm Cortex-A7 processor @ 650MHz, Arm Cortex-M4 @ 209MHz, 3D GPU Vivante @ 533MHz with OpenGL ES 2.0 support System Memory – 1GB DRAM DDR3L @ 533MHz Storage – 8GB eMMC flash, 2MB flash, micro SD socket Video Output – HDMI 1.4 (Analog ADV7513 transceiver) Networking – Gigabit Ethernet, […]

August 27, 2018 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

UltraZed-EV Starter Kit Support Simultaneous 4K Encoding and Decoding with Xilinx Zynq UltraScale+ EV MPSoC

Xilinx unveiled Zynq UltraScale+ MPSoC‘s combining Arm Cortex A53/R5 cores with FPGA fabric back in 2015. and we started to see development boards and products based on the solution starting in 2017 with offerings such as AXIOM Board, TRENZ TE0808 SoM, or more recently 96Boards compliant Ultra96 development board. All last three boards have one thing in common: they all use an Zynq UltraScale+ GC MPSoC that adds a Mali-400MP2 GPU to CG MPSoC family. But there’s also a third EV family which standards for “Embedded Vision”, and adds support for 4K H.264 / H.265 hardware video codec capable of simultaneous encode and decode. The platform targets multimedia, automotive ADAS, surveillance, and other embedded vision applications. So far, I don’t think I had seen any boards based on Ultrascale+ EV MPSoC, but AVNet – following up on their UltraZed-EG starter kit – has now launched an UltraZed-EV starter kit powered […]