bluetooth News - Page 44 of 65 - CNX Software

December 13, 2016 by Jean-Luc Aufranc (CNXSoft) - 3 Comments

$24 Winkel Arduino Compatible Board Includes WiFi, Bluetooth, 2.4 GHz RF, and an RTC (Crowdfunding)

There are plenty of Arduino compatible boards with WiFi based on ESP8266 WiSoC going for around $5 to $10, and with ESP32 processor, we are starting to have $15 to $20 boards with both WiFi and Bluetooth, but while ESP-IDF SDK has been progressing nicely, some parts of Bluetooth functionality are still not implemented. Winkel board offers an interesting alternative by offering WiFi, Bluetooth, 2.4GHz ISM, and an RTC for $24. Winkel board specifications: MCU – Microchip/Atmel ATmega128 MCU @ 16 MHz with 128KB flash memory, 4KB SRAM, 4KB EEPROM Connectivity WiFi 802.11 b/g/n via ESP12E module based on ESP8266 Bluetooth 2.0 + EDR via HC-05 module RF Radio – NRF24l01 2.4 GHz ISM radio. (Note: It might be possible to use it for Bluetooth LE connection, see here and there). I/Os (through both Atmel MCU and ESP8266) 38x Digital I/Os 7x PWM Digital I/Os 8x Analog Inputs USB – […]

December 8, 2016December 9, 2016 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

STMicro SensorTile is a Tiny STM32 Module with Bluetooth 4.1 LE and Four Sensor Chips

STMicroelectronics SensorTile is a 13.5 x 13.5mm sensor board based on STM32L4 ARM Cortex-M4 microcontroller, a MEMS accelerometer, gyroscope, magnetometer, pressure sensor, a MEMS microphone, as well as a 2.4Ghz radio chip for Bluetooth 4.1 Low Energy connectivity for wearables, smart home, and IoT projects. SensorTile hardware specifications: MCU – STMicro STM32L476 ARM Cortex-M4 microcontroller@ up to 80 MHz with 128 KB RAM, 1MB flash Connectivity – Bluetooth 4.1 Smart/LE via BlueNRG-MS network processor with integrated 2.4GHz radio compliant with Sensors LSM6DSM 3D accelerometer + 3D gyroscope LSM303AGR 3D Magnetometer + 3D accelerometer LPS22HB pressure sensor/barometer MP34DT04 digital MEMS microphone I/Os – 2x 9 half holes with access to UART, SPI, SAI (Serial Audio Interface), I2C, DFSDM, USB, OTG, ADC, and GPIOs signals Debugging – SWD interface (multiplexed with GPIOs) Power Supply Range – 2V to 5.5 V Dimensions – 13.5 x 13.5 mm Software development can be done through […]

December 7, 2016 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

Nordic Semi Unveils nRF52840 Bluetooth 5 Ready SoC and Development Kit

Nordic Semiconductor nRF52xx Bluetooth and 2.4 GHz solutions are very often found in development kits and low power devices such as wearables, and it’s no surprise that the company introduced a new nRF52840 SoC supporting Bluetooth 5, the new standard promising twice the range, and four times the speed of BLE 4.x, as well as ANT, 802.15.4, 2.4GHz proprietary, and NFC connectivity. Nordic Semi nRF52840 key features and specifications: MCU – 32-bit ARM Cortex-M4 @ 64 MHz with with FPU Memory & Storage – 256 KB RAM, 1MB Flash Connectivity Bluetooth 5-ready multiprotocol radio Bluetooth 5 data rate support: 2 Mbps, 1 Mbps, 500 kbps, 125 kbps 104 dB link budget for Bluetooth low energy -96 dBm sensitivity for Bluetooth low energy Programmable output power from +8 dBm to -20 dBm NFC-A tag on chip Single-ended antenna output (on-chip balun) I/Os USB – Full-speed 12 Mbps USB controller SPI up […]

November 30, 2016November 30, 2016 by Jean-Luc Aufranc (CNXSoft) - 3 Comments

NXP Modular IoT Gateway Supports Thread, Zigbee, NFC, Bluetooth and WiFi Connectivity

NXP has just announced a modular IoT gateway solution for large node networks (>= 250 nodes) based on Volansys i.MX6UL system-on-module, supporting wireless communications protocols such as Thread, ZigBee, NFC through add-on modules, on top of Wi-Fi and Bluetooth 4.1. NXP Modular IoT Gateway specifications: SoM – Volansys i.MX6UL 200-pin SO-DIMM module with: SoC – NXP i.MX 6UL ARM Cortex A7 processor @ 528 MHz System Memory – 256MB to 1GB DDR3L RAM Storage – 1GB to 4GB NAND flash, optional 4GB to 16GB eMMC flash, EEPROM for device info PMIC, Mbit Ethernet PHY Wireless Connectivity Expansion Modules: PN7120 explorer board for NFC Kinetis KW41 module for Thread support JN5169 module for Zigbee support 2x MikroBUS headers Baseboard connectors / features: Storage – 1x micro SD slot Connectivity – 1x 10/100M Ethernet port, Murata WiFi 802.11 b/g/n & Bluetooth 4.1 + EDR module with external antenna connector USB – 2x […]

November 30, 2016November 30, 2016 by Jean-Luc Aufranc (CNXSoft) - 9 Comments

You Can Buy AirPods-like Wireless Bluetooth Stereo Earbuds for $16 and Up

Most Bluetooth headsets on the market actually come with some sort of wire or holding mechanism, which may not always be convenient, for example I can’t use mine comfortably while lying down on the bed. But that to electronics miniaturization, companies have recently started to offer truly wireless Bluetooth earbuds, including Apple’s yet-to-be available $159 Airpods. This morning I noticed two similar products in new arrivals list, first with $59.99 QCY Q29 mini Earburds on GeekBuying, and then even cheaper, but not quite as good looking (and likely not so good sounding), “FreeStereo Twins Wireless Bluetooth v4.1 In-Ear Headset w/ Mic” on DealExtreme going for just $22.25 including shipping. Let’s start with QCY Q29 earbuds specifications: Connectivity – Bluetooth 4.1 with HFP, HSP, A2DP, AVRC protocols support; up to 5-10 meter range Built-in Microphone Charging port – pogo on earbuds, micro USB to storage/charging box Battery – 45mAh for up […]

November 25, 2016 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

Sevenhugs Smart Remote is a Universal Direction Aware WiFi, Bluetooth and IR Remote Control (Crowdfunding)

You may have all sort of remote control devices around your home from the traditional IR remote control for your TV, air conditioner, audio system etc.., as well remote control apps for WiFi or Bluetooth objects such as smart light bulbs or water pumps running on your smartphone. Sevenhugs Smart Remote promises to replace them all, and all you have to do is to point the remote control to your devices, or setup virtual actions to your door or window to order a Uber drive or check the weather. Sevenhugs Smart Remote specifications: MCU – ARM Cortex-M4 @ 200 MHz System Memory – 32 MB RAM LCD – 3.43″ touch screen IPS display; Dragontrail damage ans scratch resistant cover glass, anti-fingerprint & anti-glare Wireless Connectivity – IR transceiver, 802.11 b/g/n WiFi and Bluetooth 4.1 LE connectivity USB – USB C port for charging Sensors – Indoor positioning sensor, accelerometer, gyroscope, […]

October 29, 2016October 29, 2016 by Jean-Luc Aufranc (CNXSoft) - 6 Comments

ESP32 Updates – ESP32-S Module Replaces ESP3212, ESP32 DevBoards for Sale, Arduino & NodeMCU Support

There have been some developments with regards to Espressif ESP32 in the last month since my post about upcoming ESP32 development boards. First ESP3212 module is no more, and has been replaced with ESP32-S module with about the same features, but it’s not pin-to-pin compatible, so the new module won’t work with older breakout boards made for ESP3212. ESP32-S is now out of stock on Seeed Studio, but you’ll find it on IC Station, Banggood, and others shops. One good news is that it’s now easier to buy – or at least pre-order – ESP32 development boards, although stock may still be an issue, as the platform is very popular. If you live in the US, you can now backorder “Sparkfun ESP32 Thing” for $19.95. ESP32 board can be powered by either a micro USB power supply or a LiPo battery, and exposes close to 30 I/O pins. ESP32 developer […]

October 28, 2016October 28, 2016 by Jean-Luc Aufranc (CNXSoft) - 5 Comments

CS668 Combines Android TV Box, Power Bank, and Bluetooth Speakers Into One Device

CS668 is an Android 6.0 TV box powered by Amlogic S905X quad core processor, which triples as Bluetooth stereo speakers and a power bank thanks to its built-in 5,000 mAh battery. CS668 3-in-1 TV box specifications: SoC – Amlogic S905X quad core ARM Cortex-A53 @ up to 1.5 GHz with Mali-450MP GPU System Memory – 1GB DDR3 Storage – 8GB eMMC flash + micro SD slot up to 32 GB Video Output – HDMI 2.0a up to 4K @ 60 Hz Audio I/O – HDMI output, 3.5mm headphone jack, 10W stereo speakers, built-in microphone Connectivity – 802.11 b/g/n Wi-Fi @ 2.4 GHz and Bluetooth 4.0 (AP6212 module) USB – 3x USB 2.0 host ports, 1x micro USB OTG port Misc – Power & Play/Pause combo button, and volume buttons Battery – 5,000 mAh rechargeable lithium battery good for up to 48 hours Power Supply – 5V/3A Dimensions – 15.1 cm […]