Sipeed Tang Mega 138K Pro Dock features GOWIN GW5AST FPGA + RISC-V SoC

Sipeed Tang Mega 138K Pro Dock

Sipeed has launched another FPGA board part of their Tang family with the Tang Mega 138K Pro Dock powered by a GOWIN GW5AST SoC with 138K logic elements as well as an 800 MHz AE350_SOC RISC-V hardcore unit, and featuring a PCIe 3.0 x4 interface, DVI Rx and Tx, two SFP+ cages, a Gigabit Ethernet RJ45 port, and more. We’ve previously seen companies like AMD (Xilinx) and Microchip produce FPGA SoCs with hard cores such as the Zynq Ultrascale+ family (4x Cortex-A53) or the PolarFire MPSoC (4x 64-bit SiFive U54 RISC-V cores), but it’s the first time I see GOWIN introduce an FPGA + RISC-V SoC, as all the previous parts that came to my attention were FPGA devices. Sipeed Tang Mega 138K Pro Dock specifications: System-on-Module – Sipeed Tang Mega 138K Pro SoC FPGA – GOWIN GW5AST-LV138FPG676A with 138,240 LUT4 1,080 Kb Shadow SRAM (SSRAM) 6,120 Kb Block SRAM […]

Arduino GIGA R1 WiFi board gets touchscreen display shield

Arduino GIGA Display Shield

The Arduino GIGA Display Shield is a 3.97-inch RGB touchscreen display designed for the Arduino GIGA R1 WiFi board introduced a few months ago with an STM32H7 dual-core Cortex-M7/M4 microcontroller and a Murata 1DX module for WiFi 4 and Bluetooth 5.1 connectivity. Besides featuring an 800×480 touchscreen display, the new shield offers some other features such as an MP34DT06JTR digital microphone, a Bosch BMI270 six-axis IMU, a 20-pin Arducam camera connector, and an RGB LED. Arduino GIGA Display Shield (ASX00039) specifications: Display – 3.97-inch touchscreen display with 800×480 resolution (model: KD040WVFID026-01-C025A),  16.7 million colors, 5-point touch, connected over I2C Camera I/F – 20-pin ArduCam camera connectors Sensors Bosch SensorTech BMI270 6-axis IMU with 16-bit tri-axial gyroscope and a 16-bit tri-axial accelerometer STMicro MP34DT06JTR MEMS microphone Misc -1x RGB LED (I2C) Supply Voltage – 3.3V Dimensions – 106 x 80 mm The new shield can be mounted to the GIGA R1 […]

BIGME B251 – An All-in-One color E-Ink computer and standalone monitor (crowdfunding)

BIGME color E-Ink AIO PC

The BIGME B251 is a 25.3-inch color E-Ink monitor that is also sold as an All-in-One (AIO) PC with a 12th generation Core-i5 processor, 16GB RAM, and a 1TB SSD. The B251 is based on the same E-ink Kaleido 3 color display with 3200×1800 resolution as the DASUNG E-Ink color monitor, but BIGME included some extra features such as a cold/warm dual front light and voice control. It’s also the first time I’ve seen an AIO PC with an E-Ink display. BIGME B251 key features and specifications: All-in-one model SoC – Unnamed 12th Generation Intel Core-i5 Alder Lake processor System Memory – 16 GB RAM Storage – 1TB SSD OS – Windows 11 Display – 23.5-inch color E-ink Kaleido 3 color screen with 3200 x 1800 resolution, xRapid-refresh Tech, adjustable image quality, warm and cold dual front light, support for landscape and portrait mode orientation, Video Input – HDMI, mini […]

ACEMAGIC S1 – A Processor N95 mini PC with a built-in LCD information display

ACEMAGIC S1 mini PC

ACEMAGIC S1 is a mini PC powered by an Intel Processor N95 Alder Lake-N processor whose main highlight is its LCD information display that shows CPU and memory usage, CPU temperature, fan speed, and other information, and works in both portrait and landscape modes. The mini PC also comes with 16GB RAM and an SSD with either 512GB or 1TB capacity, as well as two HDMI video outputs up to 4K resolution, two gigabit Ethernet ports, WiFi 6 and Bluetooth 5.2 wireless connectivity, and four USB ports. ACEMAGIC S1 specifications: SoC – Intel Processor N95 quad-core Alder Lake N-series processor @ up to 3.4 GHz (Turbo) with 6MB cache, 16EU Intel HD graphics @ 1.2 GHz; TDP: 15W (up to 20W) System Memory – 16GB RAM Storage – 512GB or 1TB “dual-channel” M.2 SATA+NVMe SSD (whatever that means) Video Output – 2x HDMI ports up to 4Kp60; dual independent display […]

Review of Youyeetoo Rockchip RK3568 SBC with Lubuntu 20.04 and the RKNPU2 AI SDK

YY3568 SBC Lubuntu 20.04 review

We’ve already reviewed the Rockchip RK3568-power Youyeetoo YY3568 SBC with Android 11 – and listed the specifications and checked out the hardware kit –  in the first part of the review. We now had time to switch to Lubuntu 20.04, perform some basic tests, and also have a closer look at the RKNPU2 AI SDK for the built-in 0.8 TOPS AI accelerator found in the Rockchip RK3568 SoC. Installing Ubuntu or Debian on YY3568 SBC The company provides both Debian and Ubuntu images for the YY3568 SBC with different images depending on the boot device (SD card or eMMC flash) and video interface used (DSI, eDP, HDMI). Our YY3568 “Bundle 5” kit comes with an 11.6-inch eDP display so we’ll select the “Ubuntu 20” image with edp in the file name. The RKDevTool program is used to flash Linux images and it’s the same procedure as we used with Android […]

DASUNG introduces the world’s first color E-ink monitor (Crowdfunding)

DASUNG e-Ink Color Monitor

Just a couple of years ago, we would have laughed at the idea of getting an E-ink monitor, because most displays were still in black and white only, larger displays were prohibitively expensive, and nobody wanted to wait for several seconds to get a full display refresh. But there’s been some good progress in recent years with color displays, faster refresh rate, and prices coming down somewhat which has led to the launch of devices such as the Onyx BOOX Tab Ultra C 10.3-inch color E-Ink Android tablet and a range of color eReaders such as the PocketBook Color. But DASUNG is going further with the launch of the world’s first color E-ink monitor. DASUNG E-Ink color monitor specifications: 23.5-inch color E-ink Kaleido 3 color screen with 3200 x 1800 resolution 4096 colors through DASUNG X-Color Filter “Ultra-fast Turbo Refresh Tech” Optional frontlight and/or curved display (depends on model) Landscape […]

Review of CrowView 14-inch portable monitor with laptops and mini PCs

CrowView Display Laptop Mount Ubuntu

I received an early sample of the CrowView 14-inch laptop monitor for review a few weeks ago, and regular readers may have seen me already use it in some mini PC reviews, but I’ve yet to review the monitor itself, so I’ll report my experience using both laptops and mini PCs running Windows 11 and Ubuntu 22.04. CrowView laptop monitor unboxing The display ships in a retail package highlighting the main features of the display such as its Full HD resolution, compatibility with 13 to 16.5-inch laptop displays, 160° viewing angle, and its mechanical clamping mechanism. The CrowView display ships with a 12V/2A power supply, USB-A to USB-C and USB-C to USB-C cables, an HDMI to mini HDMI cable, a velcro tie, some stickers, and a user manual in English. The clamping mechanism can be found on the back of the display. There are also four buttons on the bottom […]

Youyeetoo YY3568 devkit review – Part 1: Unboxing, specifications, and Android 11 testing

Youyetoo YY3568 devkit review

Youyeetoo has sent us a review sample of their YY3568 “Bundle 5” devkit with the Rockchip RK3568-powered YY3568 SBC, an 11.6-inch touchscreen display, a MIPI camera module, and all accessories required to get started. We were especially interested in using it to play with the 1 TOPS NPU in the Rockchip RK3568 in Linux, but we’ll start the Youyeetoo YY3568 review with an unboxing, some specifications, and a quick review with Android 11 before switching to Debian 10 in the second part of the review. Youyeetoo YY3568 devkit unboxing The YY3568 single board computer itself is comprised of a carrier board and a YY3568-Core board with a Rockchip RK3568 processor, as well as 8GB RAM, 64GB eMMC flash, and WiFi 5 and Bluetooth 5.0 module. The board is suitable for various applications from generic computing to video playback and AI workloads. YY3568 SBC specifications and hardware overview Youyeetoo YY3568 board […]

Exit mobile version