mioty News - CNX Software - Embedded Systems News

June 26, 2025November 12, 2025 by Debashis Das - 1 Comment

RAKwireless Raspberry Pi CM4-based industrial gateway supports both MIOTY and LoRaWAN

WisGate Connect for MIOTY LoRaWAN gateway

The WisGate Connect for MIOTY is an industrial-grade hybrid IoT gateway with support for both MIOTY and LoRaWAN protocols. Built around the RAK7391 carrier board for Raspberry Pi CM4, it is designed for long-range IoT applications, including intelligent street lighting, waste management, environmental monitoring, and traffic flow control. In addition to dual-protocol (MIOTY and LoRaWAN) support, it features USB 2.0, USB 3.0, and a USB-C port for flashing, an HDMI output, and a UART header for debugging. Backhaul options include Wi-Fi, Ethernet, or an optional 4G LTE module. The gateway can be powered in two ways: a wide input voltage DC jack or terminal block, or optional PoE+. We first wrote about the MIOTY Standard back in April 2020. After that, in September 2021, we saw Silicon Labs introduce EFR32FG23 (FG23) and EFR32ZG23 (ZG23) SoCs with MIOTY support, but it’s been a while since we’ve covered products built around this standard. […]

November 29, 2024December 2, 2024 by Jean-Luc Aufranc (CNXSoft) - No Comments

STMicro NUCLEO-WL33CC1 and NUCLEO-WL33CC2 boards features STM32WL33 Cortex-M0+ Sub-GHz wireless MCU

STMicro NUCLEO-WL33CC1 Sub-GHz development board

STMicro unveiled the STM32WL3 sub-GHz wireless MCU family last year and has now announced the general availability of the STM32WL33 Arm Cortex-M0+ microcontroller, along with two development boards namely the NUCLEO-WL33CC1 and NUCLEO-WL33CC2 for battery-powered smart meters and smart building and industrial monitoring solutions using wireless M-Bus, Sigfox, WiSun, LoWPAN or Mioty LPWAN protocols among others. The NUCLEO-WL33CC1 and NUCLEO-WL33CC2 development boards look the same, but the former supports 826-958 MHz high-band frequencies, while the latter handles 413-479 MHz low-band frequencies. STMicro NUCLEO-WL33CC1/2 specifications: SoC – STMicro STM32WL33CCV6 MCU Core – Arm Cortex-M0+ up to 64 MHz Memory – 32KB SRAM with full retention Storage 256KB flash 1 KB OTP flash (user data) Sub-GHz Wireless 413-479 MHz or 826-958 MHz frequency bands with OOK, ASK, 2(G)FSK, 4(G)FSK, D‑BPSK, and DSSS modulations Compatible with proprietary and standardized wireless protocols such as WM-Bus, Sigfox, Mioty, KNX-RF, and IEEE 802.15.4g Low-power autonomous wake-up […]

November 21, 2023November 21, 2023 by Jean-Luc Aufranc (CNXSoft) - 8 Comments

STMicro STM32WL3 sub-GHz wireless MCU targets smart metering, smart building, and industrial monitoring

STMicroelectronics STM32WL3 is an Arm Cortex-M0+ low-power, long-range, multi-protocol wireless microcontroller working in sub-GHz ISM frequency bands, namely 413MHz – 479MHz, 826MHz – 958MHz, and soon 169MHz (2024) for protocols such as wireless M-Bus (mode N) and Wize. The multi-protocol and multi-modulation radio supports 4-(G)FSK up to 600kbit/s, 2-(G)FSK, (G)MSK, DBPSK, DSSS, OOK, ASK modulation schemes suitable for proprietary and standardized wireless protocols such as Sigfox, KNX, WiSun, mioty, M-Bus, and others. STMicro also claims to have implemented new power-saving features that extend the battery life to up to 15 years. STM32WL3 key features and specifications: MCU Core – Arm Cortex-M0+ up to 64 MHz Memory – 16KB or 32KB SRAM with full retention Storage 128KB or 256KB flash 1 KB OTP flash (user data) Wireless RF bands – 413-479 MHz, 826-958 MHz, and soon 169 MHz Data rate – 0.1 to 600 kbit/s Tx power – up to […]

September 20, 2021November 24, 2021 by Jean-Luc Aufranc (CNXSoft) - No Comments

Arm PSA Certified Level 3 Sub-GHz wireless SoCs support Amazon Sidewalk, mioty, Wireless M-Bus, Z-Wave…

Silicon Labs has announced two new sub-GHz wireless SoCs with EFR32FG23 (FG23) and EFR32ZG23 (ZG23) devices adding to the company’s Gecko Series 2 Cortex-M33 platform. Both FG23 and ZG23 support up to one mile (~1.6 km) wireless range, 10+ year battery life on a coin-cell battery, are certified with Arm PSA Level 3 security, and support “advanced wireless technologies” such as Amazon Sidewalk, mioty, Wireless M-Bus (WM-Bus), Z-Wave, and proprietary IoT networks. Silicon Labs explains the chips’ ultra-low transmit and receive radio power (13.2 mA TX at 10 dBm, 4.2 mA RX at 920 MHz) and RF implementation (+20 dBm output power and -125.3 dBm RX at 868 MHz, 2.4 kbps GFSK), makes the long-range and long battery life possible. The ZG23 is designed for Z-Wave applications with Long Range and Mesh connectivity and can be integrated into either end devices or gateways. The company is also working on ZG23-based […]

April 6, 2020April 6, 2020 by Jean-Luc Aufranc (CNXSoft) - 8 Comments

MIOTY Silicon Vendor Agnostic, Scalable LPWAN Standard to Take on LoRaWAN, NB-IoT

[April 6th update: The article was updated to reflect Fraunhofer invented the technology] There are plenty of LPWAN (Low Power Wide Area Networks) standards designed for low power, low bitrate and long-range connectivity with the most popular currently being NB-IoT and LoRaWAN. But Texas Instruments has joined other smaller companies (Fraunhofer, Ragsol, STACKFORCE, WIKA…) to form the MIOTY alliance in order to develop and promote a new LPWAN standard operating in the sub-GHz range called MIOTY. Texas Instruments explains MIOTY was born due to a lack of scalability and robustness (interferences issues) of current LPWAN solutions. But just like other similar low power WAN standards, it aims to support long-range while achieving long battery life, but MIOTY is also supposed to help IoT developers mitigate performance degradation in high-node-count networks. MIOTY works in the same license-free bands (868 MHz, 915 MHz …) as LoRa radios with no costs involved to […]